[mythtv-users] How to make sure devices are always in the same order.

[Jean-Yves Avenard]

Hi

On 7/4/06, Michael T. Dean <mtdean at thirdcontact.com> wrote:

> Proper udev configuration - http://reactivated.net/writing_udev_rules.html
>
> http://www.gossamer-threads.com/lists/mythtv/users/208646#208646
>
Thank you for those links.

After reading a lot about udev, and trying a few different
configuration, I've been unable to get it to work as I wanted (e.g.
create a new alias for the remote interface)

I guess my problems come from that I do not know which driver is
actually handling the IR interface... which makes it hard to guess the
correct line in the udev rules.

Here is a copy of the relevant dmesg output
CORE cx88[0]: subsystem: 1822:0025, board: digitalnow DNTV Live! DVB-T Pro [card
=42,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
input: cx88 IR (digitalnow DNTV Live!  as /class/input/input0
cx88[0]/0: found at 0000:04:00.0, rev: 5, irq: 169, latency: 32, mmio: 0xd000000
0
usb 5-1: new high speed USB device using ehci_hcd and address 2
tuner 1-0061: chip found @ 0xc2 (cx88[0])
tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
ACPI: PCI Interrupt 0000:04:00.1[A] -> GSI 16 (level, low) -> IRQ 169
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx2388x blackbird driver version 0.0.6 loaded
usb 5-1: configuration #1 chosen from 1 choice
cx2388x dvb driver version 0.0.6 loaded

Jean-Yves