[mythtv-users] No Audio from second Tuner
Desmond Sultana
mythtv at rogers.com
Sun Feb 19 18:37:43 UTC 2006
Hi Thom,
I had a similar problem with my system when I
added my PVR150 Card. The problem was that the
MSP3400 module wasn't loading properly. Check to see
if this failed to initialize by running the following
script:
#!/bin/sh
tac /var/log/messages |
sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV
=/p;
/= START INIT IVTV =/q' |
tac
Then Examine your output and see if it loads the
Module correctly. If you see msp3400: Failed to
Intialize or something similar to that then your
having the same problem as I did. To fix this I
needed to add the following line to my modprobe.conf
file:
options ivtv ivtv_debug=1 tuner=39
Now when I added this to the modprobe.conf file I
thought it didn't work but it turns out the volume was
way down. So you might need to check this.
I hope this helps your situation.
--- Thom Paine <painethom at gmail.com> wrote:
> Should I get audio from the test command like if I
> run cat /dev/video1
> > test.mpg? I tried that command and got video no
> problem, but I
> didn't get any audio from that either.
>
> Any other tips I could try?
>
> Thanks.
>
> --
> -=/>Thom
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
>
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list