[mythtv-users] Which device is which

[Allen]

  ----- Original Message ----- 
  From: Michael Haan 
  To: Discussion about mythtv 
  Sent: Thursday, February 16, 2006 5:51 PM
  Subject: Re: [mythtv-users] Which device is which


  On 2/16/06, Brian Wood <beww at beww.org> wrote:

    On Feb 16, 2006, at 4:32 PM, Michael Haan wrote:

    >
    > Yeah, no I mean that the difficulty in telling which modules were
    > loaded in response to which hardware or, conversely,  which drivers
    > each card is using.  In any case, I pulled the Fusion5 out leaving 
    > just the pvr 350 and the HD3000 (again, a config which was working
    > before) and grabbed lsmod | sort - here is some of it:
    >
    > btcx_risc              38857  3 cx8800,cx8802,cx88xx
    > button                 41185  0 
    > cx22702                40389  1 cx88_dvb
    > cx8800                 71373  0
    > cx8802                 47173  1 cx88_dvb
    > cx88_dvb               46429  0
    > cx88xx                103265  3 cx8800,cx88_dvb,cx8802 
    > dm_mod                 99337  0
    > dv1394                 57273  0
    > dvb_core              129277  1 video_buf_dvb
    > dvb_pll                45509  4 cx88_dvb,or51132,nxt200x,cx22702
    >
    > I'm posting this because I thought someone said that cx8800 would 
    > block cx88_dvb, or is it that I can only use one set of functions -
    > dvb, or ntsc - at a time (in which case it's ok that both are loaded)?

    You may be referring to something I posted, I had read that you could 
    not load the ntsc and the dvb drivers at the same time. I read this
    in the Gentoo HowTo setup MythTV, but I think that information pre-
    dated the integration of the hd-3000 drivers into the kernel, and may
    no longer be valid. 

    But I have also seen several references to removing the analog driver
    and (re) installing the dvb one.

    My system loads both, and I have not seen any problems that I can say
    with certainty are related to that, but I would like a definitive 
    answer, is it OK to load both driver modules ??

    I am having some problems with QAM, and if the analog cx88 module is
    contributing to them I'd like to know it, otherwise I don't want to
    waste time disabling something harmless. 
    _______________________________________________
    mythtv-users mailing list
    mythtv-users at mythtv.org
    http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users



  Ok, well then, I will be testing this shortly and get back with my results.



------------------------------------------------------------------------------


  _______________________________________________
  mythtv-users mailing list
  mythtv-users at mythtv.org
  http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060216/82db19fe/attachment.htm