[mythtv-users] DVICo Fusion Gold - v4l?

[Brian C. huffman]

On Mon, 2006-02-13 at 15:49 -0600, Noah Markon wrote:

> If you're going to get another card just get a prv150 for around $50.
> I have a pvr 150 + my fusion card, I got the fusion card just for
> HDTV. If you want OTA or QAM HD, and plainold cable then keep the
> fusion5 and get a pvr150.,
> I hope this helps..
> Noah

Have you had any problems with the combination of these two cards?  I
have a PVR-250 and a Fusion Lite in the same backend and after I put the
fusion card in, I'm having problems with my PVR-250 encoding the audio.
I see the following in the logs:

Feb 12 17:42:07 baavo kernel: ivtv0: Failed to load module tveeprom
Feb 12 17:42:07 baavo kernel: ivtv0 warning: i2c client addr: 0x50 not
found for command 0x0!
Feb 12 17:42:07 baavo kernel: ivtv0: Error -19 reading Hauppauge eeprom.
Feb 12 17:42:07 baavo kernel: ivtv0: Possible causes: the tveeprom
module was not loaded, or
Feb 12 17:42:07 baavo kernel: ivtv0: the eeprom kernel module was loaded
before the tveeprom module.
Feb 12 17:42:07 baavo kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
Feb 12 17:42:07 baavo kernel: ivtv0: i2c attach to card #0 ok
[client=(tuner unset), addr=61]
Feb 12 17:42:07 baavo kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv
i2c driver #0)
Feb 12 17:42:07 baavo kernel: ivtv0: i2c attach to card #0 ok
[client=saa7115, addr=21]
Feb 12 17:42:07 baavo kernel: ivtv0: Failed to load module msp3400
Feb 12 17:42:07 baavo kernel: ivtv0: Could not detect tuner standard,
defaulting to NTSC.
Feb 12 17:42:07 baavo kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware
(262144 bytes)

Thanks,
Brian