[mythtv-users] DVD R/W Hardware change

Tim Scholl tascholl at gmail.com
Fri Aug 18 16:41:48 UTC 2006


On 8/18/06, Calvin Harrigan <charriglists at bellsouth.net> wrote:
>
> Tim Scholl wrote:
> > I replaced my DVD R/W to a newer dual_layer drive.
> >
> > Since doing none of the "Optical Disks" functionswork.
> >
> > I know the hardware is detected, see dmegs below:
> >
> > --snip ---
> > Probing IDE interface ide1...
> > hdd: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: max request size: 1024KiB
> > hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS8913/255/63,
> > UDMA(100)
> > hda: cache flushes supported
> >  hda: hda1 hda2 hda3
> > hdb: max request size: 1024KiB
> > hdb: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS`801/255/63,
> > UDMA(100)
> > hdb: cache flushes supported
> >  hdb: unknown partition table
> > hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> > Uniform CD-ROM driver Revision: 3.20
> > libata version 1.20 loaded.
> > --snip--
> >
> > I looked in /dev and found the dvd and cdrom were still linked to hdc.
> >
> > So I deleted the links for dvd -> /dev/hdc and cdrom -> /dev/hdc and
> > recreated them for dvd -> /dev/hdd and cdrom -> /dev/hdd
> >
> > But that failed to fix the problem.
> >
> > When I try to import a cd the screen just flashes a few time and then
> > hangs until you hit escape,
> > and when it tries to burn a DVD, I get the following message in the
> > mythburn.log when it gets to where it should burn the DVD:
> >
> > --snip--
> > Burning DVD-R image
> > Sent UDP/XML packet to IP 255.255.255.255 <http://255.255.255.255> and
> > port: 6948
> > :-( unable to open64("/dev/dvd",O_RDONLY): No such device or address
> > ***********************************
> > MythTV BurnDVD stopped due to error
> > ***********************************
> > Sent UDP/XML packet to IP 255.255.255.255 <http://255.255.255.255> and
> > port: 6948
> > --snip--
> >
> > What am I missing?
> >
> > I'm running KnoppMyth R5C7
> >
> > Thanks
> >
> > --
> > Tim Scholl
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
> Wouldn't it have been easier to just set the cdrom as the master drive?
>     You know, making it hdc?  Does /dev/hdd have the same permissions as
> /dev/hdc?
> _______________________________________________


You know I never looked at the jumpers just threw it in!   That fixed it!

Thanks for the "eazy" fix.

Tim Scholl




-- 
Tim Scholl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060818/e9914cfa/attachment.htm 


More information about the mythtv-users mailing list