[mythtv-users] Modeline adjustments?

[Tim Scholl]

On 8/10/06, Steven Adeff <adeffs.mythtv at gmail.com> wrote:
>
> On 8/10/06, Morten Rønseth <morten.ronseth at webfx.no> wrote:
> >
> >  Tim Scholl wrote:
> > But looking closer I still do not see modelines for
> >
> >  "1920x1080_60i" or  "1280x720_60"
> >
> >  Any suggestions?
> >
> >
> >  Please enclose a verbatim (unedited) version of xorg.conf.
> >
> >
> >  Cheers,
> >
> >
> >  -Morten
> >
> >
> > Tim
> >
> >
> >
> > On 8/10/06, Tim Scholl <tascholl at gmail.com> wrote:
> > >
> > > I down loaded and installed 1.0-8762
> > >
> > > NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15
> > 13:06:38 PDT 2006
> > >
> > > It updated my XF86Config-4 with the new modeline:
> > > ModeLine       "1920x1200" 193.2 1920 2048 2256 2592 1200 1201 1204
> 1242
> > +hsync -hsync
> > >
> > > But when I look at the XFree86.0.log
> > >
> > > --snip--
> > > (II) Setting vga for screen 0.
> > > (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
> > > (=) NVIDIA(0): RGB weight 888
> > > (=) NVIDIA(0): Default visual is TrueColor
> > > (=) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
> > > (**) NVIDIA(0): Enabling RENDER acceleration
> > > (II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:1:0:0
> > > (--) NVIDIA(0): VideoRAM: 262144 kBytes
> > > (--) NVIDIA(0): VideoBIOS: 04.34.20.27.02
> > > (II) NVIDIA(0): Detected AGP rate: 8X
> > > (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> > > (--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at
> > PCI:1:0:0:
> > > (--) NVIDIA(0):     Samsung (CRT-0)
> > > (--) NVIDIA(0): Samsung (CRT-0): 350.0 MHz maximum pixel clock
> > > (II) NVIDIA(0): Assigned Display Device: CRT-0
> > > (WW) NVIDIA(0): No valid modes for "1920x1200"; removing.
> > > (II) NVIDIA(0): Validated modes:
> > > (II) NVIDIA(0):     "1024x768"
> > > (II) NVIDIA(0):     "800x600"
> > > (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
> > > (WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot
> > compute
> > > (WW) NVIDIA(0):     DPI from EDID.
> > > (**) NVIDIA(0): DPI set to (56, 65); computed from "DisplaySize"
> Monitor
> > section option
> > > (--) Depth 24 pixmap format is 32 bpp
> > > (II) do I need RAC?  No, I don't.
> > > --snip--
> > >
> > > Since I will be connecting this through a 9A60 to my HDTV dont I also
> need
> > to specify interlaced?
> > >
>
> please please bottom post (check my sig for mailinglist etiquette.
>
> here's some of my xorg.conf for my frontend that uses my PCX5300 (a
> FX5200 grafted on to a PCIE card) VGA output through my 9A60 to my
> HDTV with driver 8756...
>
> Section "Device"
>     Identifier  "fx5200"
>     Driver      "nvidia"
>     Option      "RenderAccel"       "1"
>     Option      "RandRRotation"     "1"
>     Option      "IgnoreDisplayDevices"      "TV"
>     Option      "Coolbits"  "1"
>     VendorName  "All"
>     BoardName   "All"
>     BusID       "PCI:5:0:0"
> EndSection
>
> Section "Screen"
>     Identifier     "Sanyo"
>     Device         "fx5200"
>     Monitor        "HDTV"
>     DefaultDepth    24
>     Option         "NoLogo" "False"
>     Option         "IgnoreDisplayDevices" "TV"
>     Option         "RandRRotation" "True"
>     Option         "DPI" "148 x 148"
>     Option "ConnectedMonitor" "CRT"
>     Option "UseDisplayDevice" "CRT-0"
>     SubSection     "Display"
>         Depth       24
>         Modes      "1920x1080_60i" "1280x720_60"
>     EndSubSection
> EndSection
>
> I have no modelines for "1920x1080_60i" "1280x720_60"
>
> Steven,

Thanks for the informtion, Do you have a "Monitor section" ?  That is where
my modes are defined.  Could you post it ?

Thanks

-- 
Tim Scholl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060811/124de90b/attachment.htm