[mythtv-users] kworld ATSC 110
tv at wilson.cx
tv at wilson.cx
Thu Aug 10 11:16:16 UTC 2006
Hi all:
Well I;ve not had much luck RE: Darrren's suggestions. As a note - I'm
in the U.S. using ATSC, not in Australasia as my TLD might suggest.
More info:
A scandvb does give me some good data:
[root at mediaplex ~]# cat ~/.tzap/channels.conf
WB11-DT, St. Louis' Digital WB:545028615:8VSB:49:52:3
WB11-D2, St. Louis' Digital Tube TV:545028615:8VSB:65:68:4
WB11-TV, St. Louis' WB:545028615:8VSB:0:0:65535
KDNL-DT:575028615:8VSB:49:52:3
KSDK-DT:599028615:8VSB:49:52:3
KSDK-WX:599028615:8VSB:65:68:4
KETC HD:623028615:8VSB:81:84:3
KETCKid:623028615:8VSB:97:100:4
KETC 9:623028615:8VSB:113:116:5
KETCDIY:623028615:8VSB:129:132:6
KTVIDT :647028615:8VSB:49:52:3
KMOV:725028615:8VSB:49:52:1
A tzap fails:
[root at mediaplex ~]# tzap -r -c ~/.tzap/channels.conf "KSDK-DT"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ERROR: error while parsing inversion (syntax error)
but azap looks like it looks on to DVB stations. Is this a
contradiction, or do I just not understand what I'm seeing?
[root at mediaplex ~]# azap -r -c ~/.tzap/channels.conf "KSDK-WX"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 599028615 Hz
video pid 0x0041, audio pid 0x0044
status 1f | signal 9200 | snr 5bec | ber 000000e0 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe10 | snr e50a | ber 00000060 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe70 | snr e53a | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe40 | snr e5f6 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe70 | snr e624 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe40 | snr e568 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe60 | snr e3f0 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe70 | snr e654 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fe40 | snr e5c6 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
Any ideas?
E!
> The modules are not loaded correctly. I'm assuming it is a DVB card and
> not
> analogue. I have a kworld DVB-T card and the saa7134 modules do not work
> with
> it. Try using the cx88-dvb module and cx8800 and cx88-blackbird for
> sound, in
> that order. You could also try using the dvb-bt8xx module.
> To test the tuner I use the kaffeine player. To use the kaffeine player
> you
> will need to stop mythbackend.
>
> regards
> Darren
>
> On Wed, 9 Aug 2006 12:47 pm, tv at wilson.cx wrote:
>> Hi All:
>>
>> Ive been battling this card for about two weeks. I'd like to be able
>> to
>> provide definitive doco for everyone but frankly I'm at a bit of a
>> loss.
>>
>> My platform is FC4 x86_64. All RPM via Jarod Wilson's method.
>>
>> There are new v4l updates that indicate they include the card natively.
>> I just feel like I've missed something goofy. I can view analog signal
>> via tvtime.
>>
>> This card says it's an HDTV / NTSC. The only way a channel scan is
>> successfully is via the Analog v4l device. I did notice and firce the
>> /dev/vbi*0* the default being /dev/vbi.
>>
>> I admit I'm no HD wiz - I understand that the HD feeds are already MPEG
>> 2. I would have though though these would not be picked up by the
>> "analog" drivers. The Wiki indicates that similar cards should be
>> configed at DVB v 3.x. My attempt to do so resulted in no channels
>> scanned.
>>
>> I can azap the device and see a channel lock. But when I try a Myth
>> Watch
>> TV, it fails:
>>
>> 2006-08-08 20:03:07.365 MainServer::HandleAnnounce Monitor
>> 2006-08-08 20:03:07.371 adding: mediaplex.wilson.cx as a client
>> (events:
>> 0) 2006-08-08 20:03:07.393 MainServer::HandleAnnounce Monitor
>> 2006-08-08 20:03:07.394 adding: mediaplex.wilson.cx as a client
>> (events:
>> 1) 2006-08-08 20:03:07.409 MainServer::HandleAnnounce Playback
>> 2006-08-08 20:03:07.410 adding: mediaplex.wilson.cx as a client
>> (events:
>> 0) 2006-08-08 20:03:07.422 TVRec(1): Changing from None to
>> WatchingLiveTV
>> 2006-08-08 20:03:07.477 Channel(/dev/video0) Error:
>> SetInputAndFormat(0,
>> ATSC)
>> while setting format (v4l v2)
>> eno: Invalid argument (22)
>> 2006-08-08 20:03:07.505 Channel(/dev/video0): SetInputAndFormat(0,
>> ATSC)
>> Setting video mode with v4l version 1 worked
>> VIDIOCGMBUF:: Invalid argument
>> 2006-08-08 20:03:28.451 TVRec(1): Changing from WatchingLiveTV to None
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> [root at mediaplex ~]# dmesg | egrep "saa|dvb"
>> saa7130/34: v4l2 driver version 0.2.14 loaded
>> saa7133[0]: found at 0000:04:07.0, rev: 240, irq: 233, latency: 32,
>> mmio:
>> 0xfdbfe000
>> saa7133[0]: subsystem: 17de:7350, board: Kworld ATSC110
>> [card=90,autodetected]
>> saa7133[0]: board init: gpio is 100
>> saa7133[0]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff ff ff ff ff ff ff
>> ff saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff ff ff saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff ff tuner 0-0061: chip found @ 0xc2 (saa7133[0])
>> saa7133[0]: registered device video0 [v4l2]
>> saa7133[0]: registered device vbi0
>>
>> ---------------------------------------------------------------------------
>>
>> [root at mediaplex ~]# lsmod | egrep -i "saa|dvb"
>> saa7134_dvb 50180 0
>> dvb_pll 49156 1 saa7134_dvb
>> mt352 40452 1 saa7134_dvb
>> video_buf_dvb 39556 1 saa7134_dvb
>> dvb_core 124464 1 video_buf_dvb
>> nxt200x 47108 1 saa7134_dvb
>> tda1004x 49284 1 saa7134_dvb
>> saa7134 163176 1 saa7134_dvb
>> video_buf 60804 3 saa7134_dvb,video_buf_dvb,saa7134
>> compat_ioctl32 40960 1 saa7134
>> ir_kbd_i2c 42128 1 saa7134
>> ir_common 63108 2 saa7134,ir_kbd_i2c
>> videodev 56960 1 saa7134
>> v4l1_compat 44036 2 saa7134,videodev
>> v4l2_common 56064 4 tuner,saa7134,compat_ioctl32,videodev
>> i2c_core 59713 9
>> saa7134_dvb,dvb_pll,mt352,nxt200x,tda1004x,tuner,nvidia,saa7134,ir_kbd_i2c
>>
>> --------------------------------------------------------------------------
>>
>> Help me nail this down for the rest of the planet!
>>
>> Cheers;
>>
>> E!
>>
>>
>>
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>> !DSPAM:44d94d02288741809028901!
>
> --
> "Better to remain silent and be thought a fool than to speak out and
> remove
> all doubt." - Abraham Lincoln
>
>
>
More information about the mythtv-users
mailing list