[mythtv-users] hauppauge remote ch+, ch- ok buttons not working
Nick
knowledgejunkie at gmail.com
Fri Sep 30 21:11:24 UTC 2005
On 30/09/05, Nick Owen <owen.nick at gmail.com> wrote:
> Greetings.
>
> I've been working on this issue for some time and can't seem to find
> any similar issue in the archives or via google nor did I get a response
> from the lirc list.. I feel like I'm
> very, very close, yet oh so far ;). If I can't figure it out, I will
> probably head to radio shack for a universal remote.
>
> I have set up lirc and have tested with irw, but the channel up,
> channel down and OK buttons do not work. Most of the other buttons work:
Which other buttons do not work? I would try using irrecord to see if
you can get output from all keys to make sure the actual remote is
working properly (shutdown lirc when doing this)
Also, MythTV supports LIRC natively now, so you can use the following
in your lircrc instead of using irxevent:
# Channel Up
begin
remote = SKY_NAVIGATOR
prog = mythtv
button = CH+
repeat = 3
config = Up
end
# Channel Down
begin
remote = SKY_NAVIGATOR
prog = mythtv
button = CH-
repeat = 3
config = Down
end
The lircd.conf is correct if the remote is the Hauppauge one with a
silver top and black bottom (the previous model) and does not have the
extra keys like the following image shows:
http://hauppauge.com/images/pvr150_w_remote_large.jpg
I'll pasted my known and working PVR-350 remote lircd.conf for you to
try (some of the control parameters are a little different to yours):
# brand: HAUPPAUGE
# model no. of remote control: SILVER BLACK 350
# device controlled by this remote: ZAPWAY.DE SERIAL RX
#
begin remote
name HAUP_BLACK_SILVER_350
bits 13
flags RC5|CONST_LENGTH
eps 20
aeps 0
one 889 889
zero 889 889
plead 889
gap 113792
toggle_bit 2
frequency 36000
begin codes
OFF 0x00000000000017FD
GO 0x00000000000017FB
1 0x00000000000017C1
2 0x00000000000017C2
3 0x00000000000017C3
4 0x00000000000017C4
5 0x00000000000017C5
6 0x00000000000017C6
7 0x00000000000017C7
8 0x00000000000017C8
9 0x00000000000017C9
0 0x00000000000017C0
BACK/EXIT 0x00000000000017DF
MENU 0x00000000000017CD
RED 0x00000000000017CB
GREEN 0x00000000000017EE
VOL- 0x00000000000017D1
VOL+ 0x00000000000017D0
CH+ 0x00000000000017E0
CH- 0x00000000000017E1
OK 0x00000000000017E5
YELLOW 0x00000000000017F8
BLUE 0x00000000000017E9
MUTE 0x00000000000017CF
BLANK 0x00000000000017CC
FULL 0x00000000000017FC
REW 0x00000000000017F2
PLAY 0x00000000000017F5
FFW 0x00000000000017F4
REC 0x00000000000017F7
STOP 0x00000000000017F6
PAUSE 0x00000000000017F0
REPLAY 0x00000000000017E4
SKIP 0x00000000000017DE
end codes
end remote
HTH,
Nick
More information about the mythtv-users
mailing list