[mythtv-users] LG TPI8NSR11F tuner?

John Davis davisjp at gmail.com
Tue Sep 20 14:23:21 UTC 2005


Good day all -
New to the list, etc, etc. I am attempting to get my Hauppauge TV
(model 44801, see dmesg info) card up and running with mythtv, but
have had little to no success. I cannot seem to find a tuner in
CARDLIST.tuner that fits the LG TPI8NSR11F tuner chip on my card. I
have googled the tuner and have found that it is indeed listed in the
tveeprom module sourcecode, but I am not quite sure how to activate
it.

I have tried tuners (from CARDLIST.tuner) 2, 27, 37, and 39 with
little to no success. At best, I can only lock onto one channel (which
is half scrambled anyway).

Below is the information from dmesg when I run "modprobe bttv
card=10". My kernel is 2.6.12-gentoo-r9. TIA for the help.

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 5 (level,
low) -> IRQ 5
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 5, latency: 32, mmio: 0xdc000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tveeprom: Hauppauge: model = 44801, rev = D153, serial# = 6779291
tveeprom: tuner = LG TPI8NSR11F (idx = 53, type = 4)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = None (type = 0)
bttv0: using tuner=4
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok

Cheers,
//John


More information about the mythtv-users mailing list