[mythtv-users] Fusion DVB-t lite card

Matthew Carle matthew_carle at hotmail.com
Fri Oct 7 11:33:38 UTC 2005


The command to get this card working is:

/sbin/modprobe dvb-bt8xx

This loads the driver for the card. If you have not done this, try to run it
as root. This should make the adapter0 item that mythtv refers to. You can
then try running mythtvsetup again. Once that is working, you will need to
get it to load automatically on startup - but you can load it manually each
time until everything is working.

Matthew.

> -----Original Message-----
> From: Justin [mailto:jdaland at tpg.com.au] 
> Sent: Friday, 7 October 2005 6:10 PM
> To: Matthew Carle
> Subject: RE: [mythtv-users] Fusion DVB-t lite card
> 
> 
> 
> It comes up as Could not open card #0!
> 
> Against card type i get the following error "no such device 
> or address"
> 
> 
> Regards
> 
> Justin
> 
> 
> On Wed, 2005-10-05 at 19:52 +1000, Matthew Carle wrote:
> >  
> > > -----Original Message-----
> > > From: mythtv-users-bounces at mythtv.org 
> > > [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Justin
> > > Sent: Wednesday, 5 October 2005 7:00 PM
> > > To: Discussion about mythtv; users-mythtv at mythtv.org
> > > Subject: Re: [mythtv-users] Fusion DVB-t lite card
> > > 
> > > Regretfully it is not running. Any other thoughts?
> > > 
> > > 
> > > 
> > > On Wed, 2005-10-05 at 09:02 +0100, David Watkins wrote:
> > > > On 05/10/05, Justin & Debbie <jdaland at tpg.com.au> wrote:
> > > > > Hi all,
> > > > >
> > > > > i have read many different threads on the subject and
> > > have come back
> > > > > to the same problem - i cannot get the card to work no
> > > matter what i try.
> > > > > Basically dvb-t lite cards are supposed to autodetect
> > > since 2.6.9. 
> > > > > Not a problem mine does do that, but why doesn't it 
> get detected 
> > > > > when i run myttv-setup? As far as i know permissions have
> > > been given
> > > > > to adapter0
> > > > 
> > > > Make sure you're not running mythbackend at the time.  I
> > > believe that
> > > > it can grab the card, so that mythtv-setup can't see it.
> > > > 
> > > > Hope this helps.
> > > > _______________________________________________
> > > > mythtv-users mailing list
> > > > mythtv-users at mythtv.org
> > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > > > 
> > > > 
> > > 
> > > 
> > 
> > When you go to add the card, what is the error on the screen (where 
> > you select the tuner number)? It can be something like "permission 
> > denied" or "does not exist". Or are there no errors at this point?
> > 
> > Matthew.
> > 
> > 
> 
> 


More information about the mythtv-users mailing list