[mythtv-users] SUSE 10 and PVR 350 and Lirc

[Nick]

On 04/10/05, Mark Gardner <markgard at gmail.com> wrote:
> I have a SUSE 10 (atow RC1) box running myth svn snapshot.
> I've gotten everything working (capture, tvout, sound) but to my
> dismay I've been very unsuccessful in getting the Remote Control that
> came with the 350 to work.
> I'm unsure where to start so here are some tidbits that I think my be relevant.
>
> lsmod shows that lirc_i2c is loaded.
> irw shows no activity
> (yes the cable is plugged in correctly, I had the whole thing working
> on a Fedora Box with Jarods Guide)
>
> >From the lirc.log file:
> Oct  3 22:22:54 mythtv lircd 0.7.1: initializing '/dev/input/ir'
> Oct  3 22:23:04 mythtv lircd 0.7.1: removed client
> Oct  3 22:23:04 mythtv lircd 0.7.1: closing '/dev/input/ir'
> Oct  3 22:29:00 mythtv lircd 0.7.1: accepted new client on /var/run/lirc/lircd
> Oct  3 22:29:00 mythtv lircd 0.7.1: initializing '/dev/input/ir'
> Oct  3 22:29:08 mythtv lircd 0.7.1: removed client
> Oct  3 22:29:08 mythtv lircd 0.7.1: closing '/dev/input/ir'
> Oct  3 22:29:48 mythtv lircd 0.7.1: caught signal
> Oct  3 22:29:48 mythtv lircd 0.7.1: lircd(any) ready
> Oct  3 22:35:47 mythtv lircd 0.7.1: caught signal
> Oct  3 22:36:53 mythtv lircd 0.7.1: lircd(any) ready
> Oct  3 22:39:39 mythtv lircd 0.7.1: caught signal
> Oct  3 22:40:46 mythtv lircd 0.7.1: lircd(any) ready
> Oct  3 22:46:24 mythtv lircd 0.7.1: accepted new client on /var/run/lirc/lircd
> Oct  3 22:47:00 mythtv lircd 0.7.1: removed client
>
> from /var/log/messages
> Oct  3 22:40:51 mythtv kernel: ivtv-osd: mode is 720x480x32, linelength=2880
> Oct  3 22:40:51 mythtv kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device
> Oct  3 22:40:51 mythtv kernel: ivtv: Allocate DMA decoder OSD stream:
> 16 x 65536 buffers (1024KB total)
> Oct  3 22:40:51 mythtv kernel: lirc_dev: module not supported by
> Novell, setting U taint flag.
> Oct  3 22:40:51 mythtv kernel: lirc_dev: IR Remote Control driver
> registered, at major 60
> Oct  3 22:40:51 mythtv kernel: lirc_i2c: module not supported by
> Novell, setting U taint flag.
> Oct  3 22:40:51 mythtv kernel: bttv: disagrees about version of symbol
> tveeprom_hauppauge_analog
> Oct  3 22:40:51 mythtv kernel: bttv: Unknown symbol tveeprom_hauppauge_analog
> Oct  3 22:40:51 mythtv kernel: cx88xx: disagrees about version of
> symbol tveeprom_hauppauge_analog
> Oct  3 22:40:51 mythtv kernel: cx88xx: Unknown symbol tveeprom_hauppauge_analog

Not sure if this is relevant, but the major number for LIRC is
normally 61, whereas your log gives lirc_dev as 60.

Also, do you have another card in the system (the cx88 errors below
the ivtv/lirc output)? If you do, I would recommend commenting out the
loading (if done manually) to see if this speeds up solving the lirc
problem.

Nick