[mythtv-users] ATI Wonder Remote

[Raphael Pooser]

Are you sure you can't set this in xf86config (or xorg.conf)?  You can 
set a typematic repeat rate or turn off repetition altogether for any 
keyboard device used in X.  My remote actually runs without any entries 
in xorg at all, but I went ahead and defined it in there afterwards, 
however, I don't have the repetition unless I press the key for too 
long.  Does the "mouse" section of the remote send 4 repeats also?
Raphael

Bryan Halter wrote:

> Tim Litwiller wrote:
>
>> that last answer is correct.
>>
>>
>>
>> On 11/9/05, *David Watkins* <watkinshome at gmail.com 
>> <mailto:watkinshome at gmail.com>> wrote:
>>
>>     On 09/11/05, Folashade Adeyosoye <shardayyy at gmail.com
>>     <mailto:shardayyy at gmail.com>> wrote:
>>     >
>>     >
>>     > What am I missing, I tried following
>>     > ( http://www.litwiller.net/mythtv/remote.html) these
>>     > instructions but for each button that I press on the remote, it
>>     repeats 4
>>     > times. For example if I hit the "3" button I get   "3333"
>>     >
>>     >
>>     >
>>     >
>>     >
>>     > What might I be missing?
>>     users mailing list
>>     > mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
>>     > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>     The remote will continually generate keycodes.  However lircd should
>>     be able to convert these to single commands.
>>
>>     You could try commenting out the repeat=5 (in lircrc) line for
>>     buttons
>>     you don't want to repeat .  or maybe change it to repeat=0.
>>
>>     I think repeat=5 means that every 5th command from the remote 
>> will get
>>     sent to the application.  For most keys you probably don't want a
>>     repeat at all.  For those that you do (volume, skip etc) experiment
>>     with different numbers.
>>     _______________________________________________
>>     mythtv-users mailing list
>>     mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
>>     http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>  
>>
> The last answer is correct IF you're using LIRC with your ATI remote 
> and not the IMO much easier to use kernel driver which allows your 
> remote to act as a KB and mouse.  The problem he's referring to comes 
> in kernels > 2.6.12 when using the default ATI driver.  I've looked 
> high and low and can't find any way to configure the repeat time when 
> loading the module.  If somoene knows this please let me know
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>