[mythtv-users] FC4, Multiple Tuner (PVR-250, PVR-350) Help with sound config

Rod rod451 at gmx.net
Sun Nov 6 23:30:23 EST 2005


On Sun, Nov 06, 2005 at 11:47:30PM +0100, Rudy Zijlstra wrote:
> Rod wrote:
> 
> >Greetings,
> >
> >I've been happily using MythTv with one tuner (PVR-250) for quite a
> >while.  Now I have decided to add another tuner (PVR-350).  
> >
> >How does one configure it so that sound is working for both cards?
> >
> >I can get one or the other working but not both.  I've used Jarrod's
> >instructions resulting in the following modprobe.conf
> >
> > 
> >
> You do not tell us which version of ivtv you are using. Try 0.4.0 or 
> 0.4.1 and tell us the result. And include the ivtv messages in 
> /var/log/messages if you still have problems...

Sorry,  I'm not used to including a long log listing in a first post to
a mailing list.  Normally it gets me into trouble. :-)  I'm using 0.4.0.
Here's the output where the msp3400.ko was commented out

Nov  6 16:10:32 mythbox kernel: ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based)
Nov  6 16:10:32 mythbox kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov  6 16:10:32 mythbox kernel: tveeprom: The eeprom says no radio is present, but the tuner type 68
Nov  6 16:10:32 mythbox kernel: tveeprom: indicates otherwise. I will assume that radio is present.
Nov  6 16:10:32 mythbox kernel: tveeprom: ivtv version
Nov  6 16:10:32 mythbox kernel: tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207794
Nov  6 16:10:32 mythbox kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
Nov  6 16:10:32 mythbox kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Nov  6 16:10:32 mythbox kernel: tveeprom: audio processor = MSP4448 (type = 1b)
Nov  6 16:10:32 mythbox kernel: tveeprom: decoder processor = SAA7115 (type = 13)
Nov  6 16:10:32 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Nov  6 16:10:32 mythbox kernel:  : chip found @ 0xc2 (ivtv i2c driver #0)
Nov  6 16:10:32 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Nov  6 16:10:32 mythbox kernel: saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Nov  6 16:10:32 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
Nov  6 16:10:32 mythbox kernel: saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
Nov  6 16:10:32 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
Nov  6 16:10:32 mythbox kernel: msp34xx: ivtv version
Nov  6 16:10:32 mythbox kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode Nov  6 16:10:32 mythbox kernel: msp34xx: $Id$ compiled on: Oct 21 2005 02:12:13
Nov  6 16:10:33 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40]
Nov  6 16:10:33 mythbox kernel: tda9885/6/7: chip found @ 0x86 Nov  6 16:10:33 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
Nov  6 16:10:33 mythbox kernel: ivtv0: Failed to load module msp3400
Nov  6 16:10:33 mythbox kernel: ivtv0: loading /lib/modules/ivtv-fw-enc.bin
Nov  6 16:10:33 mythbox kernel: ivtv0: loading /lib/modules/ivtv-fw-dec.bin
Nov  6 16:10:33 mythbox kernel: ivtv0: Encoder revision: 0x02040024
Nov  6 16:10:33 mythbox kernel: ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032.
Nov  6 16:10:33 mythbox kernel: ivtv0: Decoder revision: 0x02020023
Nov  6 16:10:33 mythbox kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Nov  6 16:10:33 mythbox kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Nov  6 16:10:33 mythbox kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Nov  6 16:10:34 mythbox kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Nov  6 16:10:34 mythbox kernel: ivtv0: Create encoder radio stream Nov  6 16:10:34 mythbox kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
Nov  6 16:10:34 mythbox kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
Nov  6 16:10:34 mythbox kernel: ivtv0: Create decoder VOUT stream
Nov  6 16:10:34 mythbox kernel: ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
Nov  6 16:10:34 mythbox kernel: ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
Nov  6 16:10:34 mythbox kernel: tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
Nov  6 16:10:35 mythbox kernel: ivtv0: Initialized WinTV PVR 350, card #0
Nov  6 16:10:35 mythbox kernel: ivtv:  ======================  NEXT CARD ======================
Nov  6 16:10:35 mythbox kernel: ivtv1: Autodetected WinTV PVR 250 card (iTVC16 based)
Nov  6 16:10:35 mythbox kernel: ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
Nov  6 16:10:35 mythbox kernel: tveeprom: ivtv version
Nov  6 16:10:35 mythbox kernel: tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7369525
Nov  6 16:10:35 mythbox kernel: tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
Nov  6 16:10:35 mythbox kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Nov  6 16:10:35 mythbox kernel: tveeprom: audio processor = MSP3445 (type = c)
Nov  6 16:10:35 mythbox kernel: tveeprom: decoder processor = SAA7115 (type = 13)
Nov  6 16:10:35 mythbox kernel: ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
Nov  6 16:10:35 mythbox kernel:  : chip found @ 0xc2 (ivtv i2c driver #1)
Nov  6 16:10:35 mythbox kernel: ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
Nov  6 16:10:35 mythbox kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
Nov  6 16:10:35 mythbox kernel: ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21]
Nov  6 16:10:35 mythbox kernel: msp34xx: ivtv version
Nov  6 16:10:35 mythbox kernel: msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Nov  6 16:10:35 mythbox kernel: msp34xx: $Id$ compiled on: Oct 21 2005 02:12:13
Nov  6 16:10:35 mythbox kernel: ivtv1: i2c attach to card #1 ok [client=MSP3445G-B8, addr=40]
Nov  6 16:10:35 mythbox kernel: ivtv1: Failed to load module msp3400
Nov  6 16:10:36 mythbox kernel: ivtv1: loading /lib/modules/ivtv-fw-enc.bin
Nov  6 16:10:36 mythbox kernel: ivtv1: Encoder revision: 0x02040024
Nov  6 16:10:36 mythbox kernel: ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032.
Nov  6 16:10:36 mythbox kernel: ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Nov  6 16:10:36 mythbox kernel: ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Nov  6 16:10:36 mythbox kernel: ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Nov  6 16:10:36 mythbox kernel: ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Nov  6 16:10:36 mythbox kernel: tuner 2-0061: type set to 50 (TCL 2002N)
Nov  6 16:10:37 mythbox kernel: ivtv1: Initialized WinTV PVR 250, card #1
Nov  6 16:10:37 mythbox kernel: ivtv:  ====================  END INIT IVTV  ====================

Still only get sound from one of the cards.

Rod


More information about the mythtv-users mailing list