[mythtv-users] PVR500MCE tuner #1, ivtv: i2c client addr: 0x44 not found for command

of my own nofault at gmail.com
Sat Jul 23 05:36:33 EDT 2005


I am using the latest ivtv driver, tuner 0 loaded fine, works on myth,
but tuner #1 gave the following error below, system is P4 1.8G running
FC3, any idea? thanks.

ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: i2c client addr: 0x44 not found for command 0x40046466!
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 0x40046406!
ivtv: i2c client addr: 0x44 not found for command 0x40046406!
ivtv: No Free Mailbox for cmd 0x000000c6 after 100 tries!
ivtv: Mailbox[0] 0x000000dc flags 0x00000003
ivtv: Mailbox[1] 0x300000c2 flags 0x300000c2
ivtv: Mailbox[2] 0x300000c2 flags 0x300000c2
ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000c6!!!

-------------------------------
/etc/modprobe.conf
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
options cx25480 i2c_enable=-1,1,1
options saa7127 i2c_enable=1,-1,-1

---------------------------------
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (a) loading
ivtv: Linux version: 2.6.11-1.35_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: XXX PCI device: 0x1a30 vendor: 0x8086
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8005926
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25843-23 found. Initializing...
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
cx25840: decoder set norm NTSC
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ivtv: XXX PCI device: 0x1a30 vendor: 0x8086
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8005926
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe on adapter ivtv i2c driver #1 (0x10005)
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000001
ivtv: Radio detected
ivtv: ivtv_enc_thread: pid = 5565, itv = 0xe2230d20
ivtv: ivtv_enc_vbi_thread: pid = 5566, itv = 0xe2230d20
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 65
ivtv: Create encoder radio stream
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
ivtv: i2c client addr: 0x44 not found for command 0x40046403!
ivtv: i2c client addr: 0x44 not found for command 0x40046404!
ivtv: i2c client addr: 0x44 not found for command 0x4004646e!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x44 not found for command 0x40046403!
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 5678, itv = 0xe22542f4
ivtv: ivtv_enc_vbi_thread: pid = 5679, itv = 0xe22542f4


More information about the mythtv-users mailing list