[mythtv-users] No tvout on PVR350

Ivan Eulaers eulaersivan at yahoo.com
Wed Jul 20 01:59:51 EDT 2005


I'm having trouble to enable the tv-out on my PVR350.
When I hook up my tv to the composite out, I only have
a black screen in mythtv when I select live tv. I do
have the images on my monitor. The tv-out option in
the settings has been selected!

I'm using SuSe 9.3 and ivtv-0.2.0-rc3j.

Any help would be much appreciated.

Ivan

***************************
* modprobe.conf.local
***************************
#ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
options ivtv ivtv_std=2 tda9887=0
install ivtv /sbin/modprobe --ignore-install ivtv;
/sbin/modprobe ivtv-fb 

ivtv: unsupported module, tainting kernel.
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.3.2 (c) loading
ivtv: Linux version: 2.6.11.4-21.7-default 586 REGPARM
gcc-3.3
ivtv: In case of problems please include the debug
info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64
(was 32)
ivtv: VIA PCI device: 0x0391 vendor: 0x1106
ivtv: i2c attach [client=tveeprom,ok]
ivtv: Tuner Type 5, Tuner formats 0x00000007, Radio:
yes, Model 0x00a93491, Revision 0xf36a6633
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver
#0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0
(0x10005)
ivtv: i2c attach [client=saa7115[0],ok]
ivtv: i2c attach [client=saa7127[0],ok]
msp34xx: ivtv version
ivtv: i2c attach [client=MSP3418W-A2,ok]
ivtv: requesting firmware
ivtv: firmware loaded
ivtv: requesting firmware
ivtv: firmware loaded
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers
 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers 
1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 
262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8 using 6 103680 byte buffers 
622080 kbytes total
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 9 using 32 65536 byte buffers 
2097152 kbytes total
ivtv: Setting Tuner 5
tuner: type set to 5 (Philips PAL_BG (FI1216 and
compatibles)) by ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 6597, itv = 0xf369b3a0
ivtv: ivtv_dec_thread: pid = 6598, itv = 0xf369b3a0
ivtv: i2c client addr: 0x43 not found!
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV 
====================
ivtv_fb: unsupported module, tainting kernel.
ivtv-osd: Framebuffer module loaded (attached to ivtv
card id 0)
ivtv-osd: Framebuffer is at decoder-relative address
0x00510000 and has 1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 576]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xdd510000, mapped to
0xf4510000, size 1620k
ivtv-osd: mode is 720x576x32, linelength=2880
ivtv-osd: fb1: iTVC15 TV out frame buffer device





More information about the mythtv-users mailing list