[mythtv-users] multiple tuners - configuring capture cards

[Jim Reith]

>On Sunday 10 July 2005 10:44, Jim Reith wrote:
>>  I have recompiled ivtv with the latest and installed it with no
>>  problems. When i boot, both of my cards (pvr-150 and a pvr-350) are
>>  seen. The system had been running successfully with just the PVR-350
>>  in it. The system boots and comes up on the 350 output to the tv. The
>>  remote works. When I go to Watch TV I get a blank screen. I went in
>>  to mythtv-setup and tried to set the capture card up. There is only a
>>  pvr-250/350 choice, nothing that says PVR-150, so I use that value.
>>  Which video devices do I set up for it? The 350 was using
>>  /dev/video0. I tried /dev/video1 but that doesn't seem to want to
>>  give me the option for tuner1
>>
>>  Anyone have any suggestions?
>
>If I understand your question you are looking for a Tuner 1 option in the
>input connections menu?  You should use the Tuner 0 " [ MPEG : /dev/video1 ]
>(Tuner 0)" for your new card.

So both cards should be Tuner 0 and one is /dev/video0 and the other
is /dev/video1? Since they are both set up to the same cable source,
there isn't a problem using the "cable input source I defined twice,
I assume?

I'm pretty sure the pvr-150 is detected first so that would be video0
and the existing pvr-350 (higher in the PCI chain)  would get bumped
to video1? Like I said, the tv-out on the 350 is still working

Here's the ivtv section from dmesg. I see some unrecognized commands
(no_black_magic for instance) so I mustn't be totally configured
properly

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (y) loading
ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8002732
tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = TDA9850 (type = 3)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model
0x008d1659, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
cx25840: Unknown parameter `no_black_magic'
ivtv: Failed to load module cx25840
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Setting Tuner 50
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv: i2c client addr: 0x44 not found for command 0x40046403!
ivtv: i2c client addr: 0x44 not found for command 0x40046404!
ivtv: i2c client addr: 0x44 not found for command 0x4004646e!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x44 not found for command 0x40046403!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
ivtv: ivtv_enc_thread: pid = 2187, itv = 0xf91f7620
ivtv: ivtv_enc_vbi_thread: pid = 2188, itv = 0xf91f7620
tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 2947528
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Jul 10 2005 12:26:39
ivtv: i2c attach [client=MSP3448W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x00ad1598, Revision 0x00000001
ivtv: Radio detected
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: saa7127 client id: saa7127_i2c_id 0, skipped
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 65
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 17
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VBI minor 229
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 233
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 49
ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
ivtv: Setting Tuner 47
tuner 3-0061: type set to 47 (LG NTSC (TAPE series))
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 2282, itv = 0xf921aa1c
ivtv: ivtv_enc_vbi_thread: pid = 2283, itv = 0xf921aa1c
ivtv: ivtv_dec_thread: pid = 2284, itv = 0xf921aa1c
ivtv: ivtv_dec_vbi_thread: pid = 2285, itv = 0xf921aa1c
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #1
ivtv: ====================  END INIT IVTV  ====================

>--
>Jon Johnson
>
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users