[mythtv-users] DVB tuning problems
Mattia Martinello
liste at mattiamartinello.com
Thu Jan 27 06:21:59 EST 2005
Ok, now I can scan for channel and I can see the start channel I
configured in Input Connections.
But I cannot switch channel to channel.
If I select the channel number 1 as start channel I can see it in
mythfrontend, but I can't switch to channel number 2 (I get only a
blue-black screen).
If I select the channel number 2 as start channel I can see it it, but I
can'it switch to channel number 1.
Mythbackend when I try to switch to another channel:
2005-01-27 12:18:36.056 DVB#0 Signal Lost
2005-01-27 12:18:36.213 SIParser: About to do a reset
2005-01-27 12:18:36.213 SIParser: Closing all PIDs
2005-01-27 12:18:37.030 SIParser: Resetting all Table Handlers
2005-01-27 12:18:37.031 SIParser: SIParser Reset due to channel change
2005-01-27 12:18:37.031 SIParser: Requesting PAT
SI Standard = 1
2005-01-27 12:18:37.031 DVB#0 Multiplex Locked
2005-01-27 12:18:37.031 SIParser: Adding a PMT (3401) to the request list
2005-01-27 12:18:38.034 SIParser: Table[0]->RequirePIDs() == true
2005-01-27 12:18:38.034 SIParser: Adding PID 0 Filter 0 Mask ff
2005-01-27 12:18:38.035 SIParser: Table[2]->RequirePIDs() == true
2005-01-27 12:18:38.035 SIParser: Adding PID 1ffb Filter ff Mask 0
2005-01-27 12:18:38.035 SIParser: Table[3]->RequirePIDs() == true
2005-01-27 12:18:38.035 SIParser: Adding PID 1ffb Filter ff Mask 0
2005-01-27 12:18:38.036 SIParser: Table[6]->RequirePIDs() == true
2005-01-27 12:18:38.036 SIParser: Adding PID 10 Filter 40 Mask ff
2005-01-27 12:18:43.281 DVB#0 Timeout Getting PMT
2005-01-27 12:18:43.281 DVB#0 ERROR - Tuning for channel #1 failed.
2005-01-27 12:18:43.288 DVB#0 WARNING - Uncorrectable error in packet,
dropped.
2005-01-27 12:18:43.288 DVB#0 WARNING - Transport Stream Continuity
Error. PID = 513
2005-01-27 12:18:43.289 DVB#0 WARNING - Transport Stream Continuity
Error. PID = 651
2005-01-27 12:18:44.289 DVB#0 WARNING - No data from card in 1 second.
2005-01-27 12:18:58.319 Couldn't read data from the capture card in 15
seconds. Stopping.
2005-01-27 12:18:59.302 DVB#0 WARNING - No data from card in 1 second.
Mythfrontend logs when I try to switch to another channel:
QDateTime::fromString: Parameter out of range
QDateTime::fromString: Parameter out of range
QDateTime::fromString: Parameter out of range
2005-01-27 12:18:48.325 taking too long to be allowed to read..
2005-01-27 12:19:00.333 Waited 2 seconds for data to become available,
waiting again...
2005-01-27 12:19:14.347 Waited 14 seconds for data to become available,
aborting
Errm, event socket just closed.
2005-01-27 12:20:12.945 ReadStringList: Bad socket
2005-01-27 12:20:12.945 RemoteFile::Read(): No response from control socket.
2005-01-27 12:20:12.945 RemoteFile::Read() failed in
RingBuffer::safe_read().
Could you help me, please?
Thank you very much!
Bye
Mattia
More information about the mythtv-users
mailing list