[mythtv-users] PVR-350 TV-OUT Locking up
Mark Schindel
mark at schindel.ca
Tue Jan 25 10:31:22 EST 2005
Corey,
I had the same problems. The latest ivtv from Chris has a patch that should
fix this problem.
http://ivtv.no-ip.com/ivtv-0.2.0-rc3e.tgz
It works for me now.
I'm hoping Axel will packge up rc3e soon so I can switch back to ATrpms
distro for my ivtv but building from source is not hard. Just make sure the
installed kmdls from rc3d are gone 'cause the the build/install from sources
puts them in a different place.
mark.
----- Original Message -----
From: "Corey Haim" <gmaddr-usenet at yahoo.com>
To: <mythtv-users at mythtv.org>
Sent: Tuesday, January 25, 2005 9:47 AM
Subject: [mythtv-users] PVR-350 TV-OUT Locking up
> I am tantalizingly close to getting my box working.
>
> When I boot up with the configurations at the end of this email I can
> see the output change from the monitor to the TV, 'X' cursor appears but
> the system freezes (from the display point of view) (CTL+ALT+Fx, BkSp
> etc do nothing, mouse does not respond). The system is still OK, as I
> can use webmin in this hung state.
>
> If I remove the commands from rc.local below, use a vga monitor based
> xorg.conf and let it boot into the desktop, I can manually execute the
> commands and get my system to work with the TV with OSD perfectly --
> beautfiul quality. However the mythfrontend is on the monitor. Remote
> works too.
>
> I feel I have read everything on this matter and don't know where to go
> next. I would greatly appreciate some guidance. I am so close yet so far.
>
> Thanks for any help. Hopefully the follwing is complete, if somewhat
> lengthy.
>
>
> Relevant dumps:
>
> === BEGIN grub.conf dump ===
> kernel /vmlinuz-2.6.9-1.724_FC3 ro root=LABEL=/ rhgb acpi=ht quiet vga=792
> === END grub.conf dump ===
>
> === BEGIN rc.local dump ===
> touch /var/lock/subsys/local
> mythbackend &
> sleep 2
> /usr/sbin/lircd -d /dev/lirc0
> /usr/bin/ivtvfbctl /dev/fb1 -alpha -on -globalalpha -nolocalalpha
> === END rc.local dump ===
>
> === BEGIN rpm queries ===
> > rpm -qa | grep ivtv
> ivtvdev-0.8-1.rhfc3.at
> ivtv-firmware-enc-2.04.024-4.at
> ivtv-kmdl-2.6.9-1.724_FC3-0.2.0-60_rc3d.rhfc3.at
> ivtv-0.2.0-60_rc3d.rhfc3.at
> ivtv-firmware-dec-2.02.023-4.at
> perl-Video-ivtv-0.13-6.rhfc3.at
> ivtv-firmware-1.8a-4.at
>
> > rpm -qa | grep kernel
> kernel-2.6.9-1.724_FC3
>
> > rpm -qa | grep myth
> mythtv-0.16-82.2.rhfc3.at
> mythtv-frontend-0.16-82.2.rhfc3.at
> mythbrowser-0.16-25.rhfc3.at
> mythweather-0.16-58.rhfc3.at
> mythtv-theme-sleek-0.35-2.at
> mythtv-theme-MediaCenter-0.17-3.at
> mythmusic-0.16-61.rhfc3.at
> mythtv-suite-0.16-45.at
> mythtv-themes-0.16-82.2.rhfc3.at
> mythtv-backend-0.16-82.2.rhfc3.at
> mythgallery-0.16-61.rhfc3.at
> mythtv-theme-photo-4-6.at
> mythtv-theme-gant-0.pr1-2.at
> mythdvd-0.16-42.rhfc3.at
> mythtvsetup-0.16-82.2.rhfc3.at
> mythgame-0.16-60.rhfc3.at
> mythtv-theme-purplegalaxy-0.20031214-3.at
> mythtv-theme-isthmus-0.20040804-1.at
> mythmkmovie-1.0.1-3.rhfc3.at
> libmyth-0.16-82.2.rhfc3.at
> mythweb-0.16-63.at
> mythnews-0.16-31.rhfc3.at
> mythtv-theme-visor-0.16.2-5.at
> mythtv-theme-abstract-0.20040910-2.at
> mythphone-0.16-2.rhfc3.at
> mythvideo-0.16-58.rhfc3.at
> === END rpm query ===
>
> === BEGIN /etc/modprobe.conf ===
> alias eth0 via-rhine
> alias scsi_hostadapter sata_via
> alias snd-card-0 snd-via82xx
> options snd-card-0 index=0
> install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> /sbin/modprobe -r --ignore-remove snd-via82xx
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
>
> # ivtv modules setup
> alias char-major-61 lirc_i2c
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
>
> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
> lirc_i2c
> install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
> === END /etc/modprobe.conf ===
>
>
> === BEGIN Tail end of /var/log/messages ===
> Jan 25 09:21:48 mythtv kernel: lirc_dev: no version for "struct_module"
> found: kernel tainted.
> Jan 25 09:21:48 mythtv kernel: lirc_dev: IR Remote Control driver
> registered, at major 61
> Jan 25 09:21:48 mythtv kernel: Linux video capture interface: v1.00
> Jan 25 09:21:48 mythtv kernel: ivtv: ==================== START INIT
> IVTV ====================
> Jan 25 09:21:48 mythtv kernel: ivtv: version 0.2.0 (rc3b) loading
> Jan 25 09:21:48 mythtv kernel: ivtv: Linux version: 2.6.9-1.724_FC3 686
> REGPARM 4KSTACKS gcc-3.4
> Jan 25 09:21:48 mythtv kernel: ivtv: In case of problems please include
> the debug info
> Jan 25 09:21:48 mythtv kernel: ivtv: between the START INIT IVTV and END
> INIT IVTV lines when
> Jan 25 09:21:48 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
> Jan 25 09:21:48 mythtv kernel: ivtv: Autodetected WinTV PVR 350 card
> Jan 25 09:21:48 mythtv kernel: ivtv: Found an iTVC15 based chip
> Jan 25 09:21:48 mythtv kernel: PCI: Found IRQ 10 for device 0000:00:08.0
> Jan 25 09:21:48 mythtv kernel: PCI: Sharing IRQ 10 with 0000:00:0f.1
> Jan 25 09:21:48 mythtv kernel: PCI: Sharing IRQ 10 with 0000:00:10.0
> Jan 25 09:21:48 mythtv kernel: PCI: Sharing IRQ 10 with 0000:00:10.1
> Jan 25 09:21:48 mythtv kernel: PCI: Sharing IRQ 10 with 0000:00:12.0
> Jan 25 09:21:48 mythtv kernel: ivtv: Unreasonably low latency timer,
> setting to 64 (was 32)
> Jan 25 09:21:48 mythtv kernel: ivtv: VIA PCI device: 0x0204 vendor: 0x1106
> Jan 25 09:21:48 mythtv kernel: tveeprom: Hauppauge: model = 48132, rev =
> K268, serial# = 7683338
> Jan 25 09:21:48 mythtv kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx
> = 68, type = 47)
> Jan 25 09:21:48 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom =
> 0x08, v4l2 = 0x00001000)
> Jan 25 09:21:48 mythtv kernel: tveeprom: audio_processor = MSP3440 (type
> = 11)
> Jan 25 09:21:48 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok]
> Jan 25 09:21:48 mythtv kernel: ivtv: Tuner Type 47, Tuner formats
> 0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001
> Jan 25 09:21:48 mythtv kernel: ivtv: NTSC tuner detected
> Jan 25 09:21:48 mythtv kernel: ivtv: Radio detected
> Jan 25 09:21:48 mythtv kernel: tuner: Ignoring new-style parameters in
> presence of obsolete ones
> Jan 25 09:21:48 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus
> ivtv i2c driver #0
> Jan 25 09:21:48 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
> Jan 25 09:21:48 mythtv kernel: saa7115: starting probe for adapter ivtv
> i2c driver #0 (0x10005)
> Jan 25 09:21:48 mythtv kernel: saa7115: detecting saa7115 client on
> address 0x42
> Jan 25 09:21:48 mythtv kernel: saa7115: writing init values
> Jan 25 09:21:48 mythtv kernel: ivtv: i2c attach [client=saa7115[0],ok]
> Jan 25 09:21:48 mythtv kernel: saa7115: status: (1E) 0x01, (1F) 0xc0
> Jan 25 09:21:48 mythtv kernel: saa7127: video encoder driver version V
> 0.3 loaded
> Jan 25 09:21:48 mythtv kernel: saa7127: Selecting NTSC video Standard
> Jan 25 09:21:48 mythtv kernel: saa7127: Selecting S-Video+Composite
> Jan 25 09:21:48 mythtv kernel: saa7127: Turn WSS off
> Jan 25 09:21:48 mythtv kernel: saa7127: Widescreen Mode 4:3 Full Format
> Jan 25 09:21:48 mythtv kernel: saa7127: Selecting Normal Encoder Input
> Jan 25 09:21:48 mythtv kernel: saa7127: Enable Video Output
> Jan 25 09:21:48 mythtv kernel: ivtv: i2c attach [client=saa7127[0],ok]
> Jan 25 09:21:48 mythtv kernel: msp3400: Ignoring new-style parameters in
> presence of obsolete ones
> Jan 25 09:21:49 mythtv kernel: msp34xx: init: chip=MSP3448W-A2 +nicam
> +simple +simpler +radio mode=simpler
> Jan 25 09:21:49 mythtv kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
> Jan 25 09:21:50 mythtv kernel: ivtv: Encoder revision: 0x02040024
> Jan 25 09:21:50 mythtv kernel: ivtv: Encoder Firmware is buggy, use
> version 0x02040011
> Jan 25 09:21:50 mythtv kernel: ivtv: Decoder revision: 0x02020023
> Jan 25 09:21:50 mythtv kernel: ivtv: Configuring WinTV PVR 350 card with
> 9 streams
> Jan 25 09:21:50 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384
> byte buffers 4194304 kbytes total
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 0 minor 0
> Jan 25 09:21:50 mythtv kernel: ivtv: Create DMA stream 1
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 1 minor 32
> Jan 25 09:21:50 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte
> buffers 2097152 kbytes total
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 2 minor 224
> Jan 25 09:21:50 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608
> byte buffers 2097152 kbytes total
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 3 minor 24
> Jan 25 09:21:50 mythtv kernel: ivtv: Create stream 4
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 4 minor 64
> Jan 25 09:21:50 mythtv kernel: ivtv: Create DMA stream 5 using 16 65536
> byte buffers 1048576 kbytes total
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 5 minor 16
> Jan 25 09:21:50 mythtv kernel: ivtv: Create stream 6 using 1024 2048
> byte buffers 262144 kbytes total
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 6 minor 228
> Jan 25 09:21:50 mythtv kernel: ivtv: Create stream 7
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 7 minor 232
> Jan 25 09:21:50 mythtv kernel: ivtv: Create DMA stream 8
> Jan 25 09:21:50 mythtv kernel: ivtv: Registered v4l2 device, streamtype
> 8 minor 48
> Jan 25 09:21:50 mythtv kernel: ivtv: Setting Tuner 47
> Jan 25 09:21:50 mythtv kernel: tuner: type set to 47 (LG NTSC (TAPE
> series)) by ivtv i2c driver #0
> Jan 25 09:21:50 mythtv kernel: ivtv: Setting audio matrix to input 3,
> output 1
> Jan 25 09:21:50 mythtv kernel: ivtv: Switching standard to NTSC.
> Jan 25 09:21:50 mythtv kernel: ivtv: ivtv_enc_thread: pid = 2661, itv =
> 0xf92012a0
> Jan 25 09:21:50 mythtv kernel: ivtv: ivtv_dec_thread: pid = 2662, itv =
> 0xf92012a0
> Jan 25 09:21:50 mythtv kernel: saa7115: decoder set norm NTSC
> Jan 25 09:21:50 mythtv kernel: saa7115: set audio: 0x01
> Jan 25 09:21:50 mythtv kernel: saa7127: Setting Encoder Video Standard
> Jan 25 09:21:50 mythtv kernel: saa7127: Set NTSC Video Mode
> Jan 25 09:21:50 mythtv kernel: saa7127: Selecting NTSC video Standard
> Jan 25 09:21:50 mythtv kernel: ivtv: Initialized WinTV PVR 350, card #0
> Jan 25 09:21:50 mythtv kernel: ivtv: ==================== END INIT IVTV
> ====================
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: Framebuffer module loaded
> (attached to ivtv card id 0)
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: Framebuffer is at
> decoder-relative address 0x00510000 and has 1704960 bytes.
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: screen coords: [0 0] -> [720 480]
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: original global alpha = 208
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: current OSD state = 39
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: new global alpha = 208 (1 255 0)
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: framebuffer at 0xf5510000,
> mapped to 0xfa090000, size 1350k
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: mode is 720x480x32,
linelength=2880
> Jan 25 09:21:50 mythtv kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer
> device
> Jan 25 09:21:51 mythtv kernel: bttv: driver version 0.9.15 loaded
> Jan 25 09:21:51 mythtv kernel: bttv: using 8 buffers with 2080k (520
> pages) each for capture
> Jan 25 09:21:51 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
> Jan 25 09:21:51 mythtv kernel: ivtv: i2c attach [client=Hauppauge IR,ok]
> Jan 25 09:21:51 mythtv kernel: lirc_dev:
> lirc_register_plugin:sample_rate: 10
> Jan 25 09:21:51 mythtv lircd 0.7.0[2784]: lircd(any) ready
> Jan 25 09:21:51 mythtv lircd: lircd startup succeeded
> Jan 25 09:21:51 mythtv sendmail: sendmail startup succeeded
> Jan 25 09:21:51 mythtv sendmail: sm-client startup succeeded
> Jan 25 09:21:51 mythtv gpm[2823]: *** info [startup.c(95)]:
> Jan 25 09:21:51 mythtv gpm[2823]: Started gpm successfully. Entered
> daemon mode.
> Jan 25 09:21:51 mythtv gpm[2823]: *** info [mice.c(1766)]:
> Jan 25 09:21:51 mythtv gpm[2823]: imps2: Auto-detected intellimouse PS/2
> Jan 25 09:21:52 mythtv gpm: gpm startup succeeded
> Jan 25 09:21:52 mythtv crond: crond startup succeeded
> Jan 25 09:21:52 mythtv xfs: xfs startup succeeded
> Jan 25 09:21:52 mythtv anacron: anacron startup succeeded
> Jan 25 09:21:52 mythtv atd: atd startup succeeded
> Jan 25 09:21:52 mythtv xfs[2859]: ignoring font path element
> /usr/X11R6/lib/X11/fonts/Speedo (unreadable)
> Jan 25 09:21:52 mythtv readahead: Starting background readahead:
> Jan 25 09:21:52 mythtv rc: Starting readahead: succeeded
> Jan 25 09:21:52 mythtv messagebus: messagebus startup succeeded
> Jan 25 09:21:53 mythtv cups-config-daemon: cups-config-daemon startup
> succeeded
> Jan 25 09:21:53 mythtv haldaemon: haldaemon startup succeeded
> Jan 25 09:21:54 mythtv fstab-sync[2930]: removed all generated mount
points
> Jan 25 09:21:56 mythtv fstab-sync[3042]: added mount point /media/cdrom
> for /dev/hda
> Jan 25 09:21:57 mythtv rc: Starting webmin: succeeded
> Jan 25 09:21:58 mythtv kernel: saa7115: decoder set picture bright=128
> contrast=63 saturation=64 hue=0
> Jan 25 09:21:58 mythtv kernel: saa7115: decoder set picture bright=128
> contrast=63 saturation=63 hue=0
> Jan 25 09:21:58 mythtv kernel: saa7115: decoder set picture bright=127
> contrast=63 saturation=63 hue=0
> Jan 25 09:21:58 mythtv kernel: saa7115: decoder set picture bright=127
> contrast=63 saturation=63 hue=0
> Jan 25 09:21:58 mythtv kernel: saa7115: decoder disable output
> Jan 25 09:21:59 mythtv kernel: saa7115: decoder enable output
> === END Tail end of /var/log/messages ===
>
>
> === BEGIN /etc/X11/xorg.conf ===
> # XFree86 4 configuration created by pyxf86config
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
>
> # RgbPath is the location of the RGB database. Note, this is the name
> of the
> # file minus the extension (like ".txt" or ".db"). There is normally
> # no need to change the default.
> # Multiple FontPath entries are allowed (they are concatenated together)
> # By default, Red Hat 6.0 and later now use a font server independent of
> # the X server to render fonts.
> RgbPath "/usr/X11R6/lib/X11/rgb"
> ModulePath "/usr/X11R6/lib/modules/extensions/nvidia"
> ModulePath "/usr/X11R6/lib/modules/extensions"
> ModulePath "/usr/X11R6/lib/modules"
> FontPath "unix/:7100"
> EndSection
>
> Section "Module"
> Load "dbe"
> Load "extmod"
> # Load "fbdevhw"
> Load "glx"
> Load "record"
> Load "freetype"
> Load "type1"
> EndSection
>
> Section "InputDevice"
>
> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
> # Option "Xleds" "1 2 3"
> # To disable the XKEYBOARD extension, uncomment XkbDisable.
> # Option "XkbDisable"
> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults). For example, for a non-U.S.
> # keyboard, you will probably want to use:
> # Option "XkbModel" "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> # Option "XkbModel" "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> # Option "XkbLayout" "de"
> # or:
> # Option "XkbLayout" "de"
> # Option "XkbVariant" "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> # Option "XkbOptions" "ctrl:swapcaps"
> # Or if you just want both to be control, use:
> # Option "XkbOptions" "ctrl:nocaps"
> #
> Identifier "Keyboard0"
> Driver "keyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "no"
> EndSection
>
> Section "InputDevice"
>
> # If the normal CorePointer mouse is not a USB mouse then
> # this input device can be used in AlwaysCore mode to let you
> # also use USB mice at the same time.
> Identifier "DevInputMice"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "no"
> EndSection
>
> Section "Monitor"
> Identifier "NTSC Monitor"
> HorizSync 30-68
> VertRefresh 50-120
> Mode "720x480"
> # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
> DotClock 34.564
> HTimings 720 752 840 928
> VTimings 480 484 488 504
> Flags "-HSync" "-VSync"
> EndMode
> EndSection
>
> Section "Device"
> Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
> Driver "ivtvdev"
> #Driver "fbdev"
>
> ### change fb0 to whatever your card grabbed
> Option "fbdev" "/dev/fb1"
>
> ### change the BusID to whatever is reported by lspci, specify
> it as hex.
> BusID "PCI:0:8:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Hauppauge PVR 350 iTVC15 Framebuffer"
> Monitor "NTSC Monitor"
> DefaultDepth 24
> DefaultFbbpp 32
> Subsection "Display"
> Depth 24
> FbBpp 32
> Modes "720x480"
> EndSubsection
> EndSection
>
> Section "DRI"
> Group 0
> Mode 0666
> EndSection
> === END /etc/X11/xorg.conf ===
>
>
> === BEGIN end of /var/log/Xorg.0.log ===
>
> (II) LoadModule: "ivtvdev"
> (II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
> (II) Module ivtv: vendor="X.Org Foundation"
> compiled for 4.3.99.902, module version = 0.8.0
> ABI class: X.Org Video Driver, version 0.7
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 6.8.1.902, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
> (II) LoadModule: "keyboard"
> (II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
> (II) Module keyboard: vendor="X.Org Foundation"
> compiled for 6.8.1.902, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
> (II) IVTVDEV: driver for framebuffer: PVR-350
> (II) Primary Device is: PCI 01:00:0
> (--) Chipset PVR-350 found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfa001000 - 0xfa0010ff (0x100) MX[B]
> [6] -1 0 0xfa000000 - 0xfa0000ff (0x100) MX[B]
> [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
> [8] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B)
> [9] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [10] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [13] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
> [14] -1 0 0x0000eb00 - 0x0000ebff (0x100) IX[B]
> [15] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B]
> [16] -1 0 0x0000e900 - 0x0000e91f (0x20) IX[B]
> [17] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [18] -1 0 0x0000e700 - 0x0000e71f (0x20) IX[B]
> [19] -1 0 0x0000e600 - 0x0000e60f (0x10) IX[B]
> [20] -1 0 0x0000e500 - 0x0000e5ff (0x100) IX[B]
> [21] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B]
> [22] -1 0 0x0000e300 - 0x0000e303 (0x4) IX[B]
> [23] -1 0 0x0000e200 - 0x0000e207 (0x8) IX[B]
> [24] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
> [25] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
> (II) IVTVDEV(0): using /dev/fb1
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfa001000 - 0xfa0010ff (0x100) MX[B]
> [6] -1 0 0xfa000000 - 0xfa0000ff (0x100) MX[B]
> [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
> [8] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B)
> [9] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [10] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
> [17] -1 0 0x0000eb00 - 0x0000ebff (0x100) IX[B]
> [18] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B]
> [19] -1 0 0x0000e900 - 0x0000e91f (0x20) IX[B]
> [20] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [21] -1 0 0x0000e700 - 0x0000e71f (0x20) IX[B]
> [22] -1 0 0x0000e600 - 0x0000e60f (0x10) IX[B]
> [23] -1 0 0x0000e500 - 0x0000e5ff (0x100) IX[B]
> [24] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B]
> [25] -1 0 0x0000e300 - 0x0000e303 (0x4) IX[B]
> [26] -1 0 0x0000e200 - 0x0000e207 (0x8) IX[B]
> [27] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
> [28] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
> [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (**) IVTVDEV(0): Depth 24, (**) framebuffer bpp 32
> (==) IVTVDEV(0): RGB weight 888
> (==) IVTVDEV(0): Default visual is TrueColor
> (==) IVTVDEV(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) IVTVDEV(0): Hardware: iTVC15 TV out (vidmem: 2025k)
> (II) IVTVDEV(0): Checking Modes against framebuffer device...
> (II) IVTVDEV(0): mode "720x480" ok
> (II) IVTVDEV(0): Checking Modes against monitor...
> (--) IVTVDEV(0): Virtual size is 720x480 (pitch 720)
> (**) IVTVDEV(0): Mode "720x480": 34.6 MHz (scaled from 0.0 MHz), 37.2
> kHz, 73.9 Hz
> (II) IVTVDEV(0): Modeline "720x480" 34.56 720 752 840 928 480 484
> 488 504 -hsync -vsync
> (==) IVTVDEV(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 6.8.1.902, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.2
> (**) IVTVDEV(0): Using "Shadow Framebuffer"
> (II) Loading sub module "shadow"
> (II) LoadModule: "shadow"
> (II) Loading /usr/X11R6/lib/modules/libshadow.a
> (II) Module shadow: vendor="X.Org Foundation"
> compiled for 6.8.1.902, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.2
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
> [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [6] -1 0 0xfa001000 - 0xfa0010ff (0x100) MX[B]
> [7] -1 0 0xfa000000 - 0xfa0000ff (0x100) MX[B]
> [8] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
> [9] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B)
> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [11] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [17] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
> [18] -1 0 0x0000eb00 - 0x0000ebff (0x100) IX[B]
> [19] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B]
> [20] -1 0 0x0000e900 - 0x0000e91f (0x20) IX[B]
> [21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [22] -1 0 0x0000e700 - 0x0000e71f (0x20) IX[B]
> [23] -1 0 0x0000e600 - 0x0000e60f (0x10) IX[B]
> [24] -1 0 0x0000e500 - 0x0000e5ff (0x100) IX[B]
> [25] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B]
> [26] -1 0 0x0000e300 - 0x0000e303 (0x4) IX[B]
> [27] -1 0 0x0000e200 - 0x0000e207 (0x8) IX[B]
> [28] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
> [29] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
> [30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> bitsPerPixel=32, depth=24, defaultVisual=TrueColor
> mask: ff0000,ff00,ff, offset: 16,8,0
> (EE) IVTVDEV(0): FBIOPAN_DISPLAY: Invalid argument
> (==) IVTVDEV(0): Backing store disabled
> (==) RandR enabled
> (II) Setting vga for screen 0.
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (**) Option "Protocol" "IMPS/2"
> (**) Mouse0: Device: "/dev/input/mice"
> (**) Mouse0: Protocol: "IMPS/2"
> (**) Option "CorePointer"
> (**) Mouse0: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (**) Option "Emulate3Buttons" "no"
> (**) Option "ZAxisMapping" "4 5"
> (**) Mouse0: ZAxisMapping: buttons 4 and 5
> (**) Mouse0: Buttons: 5
> (**) Option "CoreKeyboard"
> (**) Keyboard0: Core Keyboard
> (**) Option "Protocol" "standard"
> (**) Keyboard0: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Keyboard0: XkbRules: "xfree86"
> (**) Option "XkbModel" "pc105"
> (**) Keyboard0: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) Keyboard0: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard0: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> (II) Mouse0: ps2EnableDataReporting: succeeded
>
> === END /var/log/Xorg.0.log ===
>
>
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list