[mythtv-users] PVR350 audio - soundcard line in

[John Harvey]

What are you using as the line out. I am using the phone sockets from he
svhs/composite cable which just works.

What are you playing?
Is it live tv or a captured mpeg?

Things to try are
Capturing video/audio from /dev/video0 and playing it back with mplayer to
see if there is audio in the stream.
Playing a captured mpeg that you know has audio at /dev/video16 and seeing
if you can here the audio.

Assuming the problem is with the capture make sure you are using ivtv's
version of msp3400 and not the one that came with your kernel.

John



> -----Original Message-----
> From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> bounces at mythtv.org] On Behalf Of MadPatrick
> Sent: 23 January 2005 20:53
> To: 'Discussion about mythtv'
> Subject: RE: [mythtv-users] PVR350 audio - soundcard line in
> 
> Good tip,
> 
> I've put in the soundcard-out from another pc to the soundcard-in and it
> works.
> So the problem is the PVR350 out.
> 
> Any idea's, because it works fine on my tv-set.
> 
> 
> ________________________________
> 
> Van: mythtv-users-bounces at mythtv.org
> [mailto:mythtv-users-bounces at mythtv.org] Namens John Harvey
> Verzonden: zondag 23 januari 2005 21:33
> Aan: 'Discussion about mythtv'
> Onderwerp: RE: [mythtv-users] PVR350 audio - soundcard line in
> 
> 
> 
> It should work so I guess I would start by feeding another sound source
> into
> your line in and seeing if that comes out. Then you can determine whether
> it's the audio card/line in problem or the 350 output. At least then you
> know where to start looking for the problem.
> 
> 
> 
> John
> 
> 
> 
> ________________________________
> 
> From: mythtv-users-bounces at mythtv.org
> [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of MadPatrick
> Sent: 23 January 2005 19:12
> To: mythtv-users at mythtv.org
> Subject: [mythtv-users] PVR350 audio - soundcard line in
> 
> 
> 
> I want to redirect the sound from my PVR350 trough the soundcard to the
> speaker.
> 
> i have currently setup mythtv on FC1. The hardware i'm using is an onboard
> i810 soundcard on a compaq motherboard.
> 
> 
> 
> I've plugged in the adio out in the line in of the soundcard, but i'm
> hearing no sound on my speaker from the tv.
> 
> All channels are set open and put to 100%.
> 
> 
> 
> who can help me with this.
> 
> 
> 
> thanks
> 
> 
> 
> 
> 
> 
>