[mythtv-users] Skipping adverts in UK using DVB-T - supported ?

[Ashley Bostock]

Yes, I notice this most on five.

Ash.


On Thu, 20 Jan 2005 08:24:04 +0000, Andy Whitworth <andywhit at gmail.com> wrote:
> My TV when in 'auto' mode often switches to/from 16:9 when the ad break appears
> so I guess there is a physical change ?  I think this would be a
> useful detection
> trigger to add to the list!
> 
> Andy.
> 
> 
> On Thu, 20 Jan 2005 00:00:05 GMT, Tom Hughes <tom at compton.nu> wrote:
> > In message <200501192307.j0JN7Wcd007133 at panther.bc2va.org>
> >           "Chris Pinkham" <cpinkham at bc2va.org> wrote:
> >
> > > > Haven't updated my cvs version yet to try the new detection, but does
> > > > it also monitor for aspect ratio changes?  Just noticed while watching
> > > > tv yesterday quite a few channels change aspect ratio when they switch
> > > > to the adverts (I'm in the UK).
> > > >
> > > > In this situation it could be a very accurate way for detecting ads.
> > >
> > > Is this a physical aspect ratio change or does the frame stay the same
> > > ratio and have black bars on the top/bottom?  I have a sample of a UK
> > > broadcast that uses the black bars and will be trying to code up something
> > > to detect that transition so it can be used to determine where commercials
> > > start/stop.  If you mean a physical frame aspect ratio change, then I'd
> > > like to detect this at some point but don't have any sample recordings
> > > to test with right now (I'm in the U.S. with analog cable).
> >
> > Well it would be black bars on the side of the program if anything
> > rather than black bars on the top and bottom of the adverts.
> >
> > In a DVB-T stream there are two ways of handling aspect ratios. For
> > simple 4:3 vs 16:9 it can be done with a simple flag. In that case
> > then the transmitted data is always the full picture area and the
> > flag tells the receiver what aspect ratio to use when displaying
> > the data - the resolution doesn't change, so would be 720x576 or
> > 704x576 in the UK depending on the channel.
> >
> > The other option is to use an AFD where a 16:9 picture is transmitted
> > and if the content is 4:3 then there are black bars on each side. There
> > is then an Active Format Descriptor (AFD) which indicates which part
> > of the transmitted picture to display. That allows more choice of
> > ratios but in the UK at least only 4:3 and 16:9 are used.
> >
> > Some channels use AFDs in the UK and some use the simple flag. Most
> > of the AFD channels don't have adverts however, but I think there is
> > one that does - certainly Five was, but it may have changed recently.
> >
> > I'm not sure how Myth handles those two cases however, or what you
> > see in the stream when you read it back from disk.
> >
> > Tom
> >
> > --
> > Tom Hughes (tom at compton.nu)
> > http://www.compton.nu/
> >
> > 
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> >
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>