[mythtv-users] FW: New Source Forge Project MythStreamTV

Ashley Bostock abostock at gmail.com
Sun Jan 16 17:38:00 EST 2005 

Right I've finially got it to compile with the following configure values:

Latest CVS Snapshot of ffmpeg (as I read vlc doesnt work too well or
at all with non cvs versions):
/video/extra/ffmpeg-cvs-2004-11-10 # ./configure --disable-x11
--disable-xvideo --disable-gtk --disable-sdl --enable-ffmpeg
--with-ffmpeg-mp3lame --with-ffmpeg-faac --with-ffmpeg-zlib
--enable-mad --enable-libdvbpsi --enable-a52 --disable-dvdplay
--enable-dvdnav --enable-vorbis --enable-ogg --enable-theora
--enable-mkv --enable-freetype --disable-cddax --disable-vcdx
--enable-speex --enable-flac --enable-goom --enable-livedotcom
--enable-caca --disable-skins2 --enable-modplug --enable-debug
--enable-gpl --enable-mp3lame --enable-pp

VLC Version 0.8.1:
./configure --disable-x11 --disable-xvideo --disable-gtk --disable-sdl
--enable-ffmpeg --with-ffmpeg-mp3lame --with-ffmpeg-zlib --enable-mad
--enable-libdvbpsi --enable-a52 --disable-dvdplay --enable-dvdnav
--enable-vorbis --enable-ogg --enable-theora --enable-mkv
--enable-freetype --disable-cddax --disable-vcdx --enable-speex
--enable-flac --enable-goom --enable-livedotcom --enable-caca
--disable-skins2 --enable-modplug --enable-debug --enable-gpl
--enable-mp3lame --enable-pp
--with-ffmpeg-tree=/video/extra/ffmpeg-cvs-2004-11-10

I now run the command line given by mythstreamtv:

/home/mythtv/mythstreamtv/mythstreamtv.sh 'DIV3' 'mp3' '256' '64' '.5'
'15' '7_20050111230000_20050111233000.nuv'

and get the following output:

VLC media player 0.8.1 Janus
[00000411] dummy interface: Using the dummy interface module...
[00000417] main private: creating httpd
[00000426] mpeg_audio packetizer: MPGA channels:2 samplerate:48000 bitrate:256
[00000429] mpeg_audio decoder: MPGA channels:2 samplerate:48000 bitrate:256
[msmpeg4 @ 0x8415adc]removing common factors from framerate
[msmpeg4 @ 0x8415adc]warning, cliping 1 dct coefficents to -127..127

as soon as I connect to the mms stream I get this:

peek=

(Same happens if using WMV2 instead)

xine can't play it and gives no error in the console, and mplayer reports:

Playing mms://81.86.71.76:8080.
Option stream url: This URL doesn't have a port part.
Option stream url: This URL doesn't have a hostname part.
[file] No filename
Failed to open mms://81.86.71.76:8080


Any ideas?


On Sun, 16 Jan 2005 11:25:03 +0000, Ashley Bostock <abostock at gmail.com> wrote:
> No matter what I try I still get the same problems mentioned above.
> 
> Is there anyway on a working system for someone to print out the exact
> config line used to compile ffmpeg and vlc? If so could someone print
> the separate ./configure commands for each.
> 
> Thanks,
> Ash.
> 
> 
> On Sun, 16 Jan 2005 20:11:34 +1000, David Whyte <david.whyte at gmail.com> wrote:
> > Looking back in the shell history, this looks like the last configure
> > I did for ffmpeg...
> >
> > [root at myth root]# ./configure --disable-x11 --disable-xvideo
> > --disable-gtk --disable-sdl --enable-ffmpeg --with-ffmpeg-mp3lame
> > --with-ffmpeg-faac --with-ffmpeg-zlib --enable-mad --enable-libdvbpsi
> > --enable-a52 --disable-dvdplay --enable-dvdnav --enable-vorbis
> > --enable-ogg --enable-theora --enable-mkv --enable-freetype
> > --disable-cddax --disable-vcdx --enable-speex --enable-flac
> > --enable-goom --enable-livedotcom --enable-caca --disable-skins2
> > --enable-modplug --enable-debug --enable-gpl --enable-mp3lame
> > --enable-pp --enable-shared-pp
> > --with-ffmpeg-tree=/home/myth/ffmpegstuff/ffmpeg-0.4.9-p
> > re1/
> >
> > Doesn't look particularly different to what Joshua tell us to use.  I
> > think I tried to take out the --enable shared-pp option a couple of
> > times too, would get further and then put them back.  One of the
> > biggest mistakes I made was that I pasted into a cygwin window, and
> > the '--' turned to a single '-', which I imagin would cause troubles
> > :(
> >
> > Let us know how you go,
> > Dave
> >
> >
> > On Sun, 16 Jan 2005 11:46:04 +1100, Itai Tavor <itai at iinet.net.au> wrote:
> > > David Whyte wrote:
> > > > I compiled and installed ffmpeg a couple of times (sometimes tweaking
> > > > the options a little ;) ).  Eventually the copoile of VLC progressed.
> > > > I also tried to compile faac too as vlc needed the libraries, but in
> > > > the end I got the dev rpms and all went well.
> > > >
> > > > HTH's (somehow)
> > > >
> > > > Dave
> > >
> > > Hi Dave,
> > >
> > > Can you post the options you used on the build that worked? I'm still
> > > stuck in this step.
> > >
> > > TIA, Itai
> > >
> > > >
> > > >
> > > > On Sat, 15 Jan 2005 18:00:49 +0000, Ashley Bostock <abostock at gmail.com> wrote:
> > > >
> > > >>Hope someone can help me get ffmpeg and vlc installed, heres the
> > > >>problems I'm having:
> > > >>
> > > >>I downloaded ffmpeg-0.4.9-pre1 and vlc-0.8.1 then extracted them to:
> > > >>
> > > >>/video/extra/ffmpeg-0.4.9-pre1
> > > >>/video/extra/vlc-0.8.1
> > > >>
> > > >>I then cd into the /video/extra/ffmpeg-0.4.9-pre1 directory and run:
> > > >>./configure --disable-x11 --disable-xvideo --disable-gtk --disable-sdl
> > > >>--enable-ffmpeg --with-ffmpeg-mp3lame --with-ffmpeg-faac
> > > >>--with-ffmpeg-zlib --en
able-mad --enable-libdvbpsi --enable-a52
> > > >>--disable-dvdplay --enable-dvdnav --enable-vorbis --enable-ogg
> > > >>--enable-theora --enable-mkv --enable-freetype --disable-cddax
> > > >>--disable-vcdx --enable-speex --enable-flac --enable-goom
> > > >>--enable-livedotcom --enable-caca --disable-skins2 --enable-modplug
> > > >>--enable-debug --enable-gpl --enable-mp3lame --enable-pp
> > > >>--enable-shared-pp
> > > >>
> > > >>Giving the following output:
> > > >>Install prefix   /usr/local
> > > >>Source path      /video/extra/ffmpeg-0.4.9-pre1
> > > >>C compiler       gcc
> > > >>make             make
> > > >>CPU              x86 (generic)
> > > >>Big Endian       no
> > > >>inttypes.h       yes
> > > >>broken inttypes.h no
> > > >>MMX enabled      yes
> > > >>Vector Builtins  yes
> > > >>gprof enabled    no
> > > >>zlib enabled     yes
> > > >>mp3lame enabled  yes
> > > >>vorbis enabled   yes
> > > >>faad enabled     no
> > > >>faadbin enabled  no
> > > >>faac enabled     no
> > > >>a52 support      yes
> > > >>a52 dlopened     no
> > > >>pp support       yes
> > > >>debug symbols    yes
> > > >>optimize         yes
> > > >>shared pp        yes
> > > >>Video hooking    yes
> > > >>SDL support      yes
> > > >>risky / patent encumbered codecs yes
> > > >>Imlib2 support   yes
> > > >>freetype support yes
> > > >>Sun medialib support no
> > > >>pthreads support no
> > > >>AMR-NB float support no
> > > >>AMR-NB fixed support no
> > > >>AMR-WB float support no
> > > >>
> > > >>Then I did make and make install.
> > > >>
> > > >>Next I cd in to the /video/extra/vlc-0.8.1 directory and run the same
> > > >>./config line listed above, this errors saying:
> > > >>
> > > >>checking for ffmpeg-config... no
> > > >>checking ffmpeg/avcodec.h usability... no
> > > >>checking ffmpeg/avcodec.h presence... no
> > > >>checking for ffmpeg/avcodec.h... no
> > > >>configure: error: Missing header file ffmpeg/avcodec.h.
> > > >>
> > > >>So I rerun it with the following option appended to the end:
> > > >>--with-ffmpeg-tree=/video/extra/ffmpeg-0.4.9-pre1/
> > > >>
> > > >>This time I get a different error:
> > > >>checking for ffmpeg-config... no
> > > >>checking for libavcodec.a in /video/extra/ffmpeg-0.4.9-pre1/... no
> > > >>configure: error:
> > > >>/video/extra/ffmpeg-0.4.9-pre1/libavcodec/libavcodec.a was not
> > > >>compiled with postprocessing support, make sure you configured ffmpeg
> > > >>with --enable-pp
> > > >>
> > > >>If you look above where I ran configure for ffmpeg it shows I ran it
> > > >>with --enable-pp, what am I doing wrong?
> > >
> >
> > --
> > GMAIL is 'da bomb baby....YEAH
> >
> > 
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> >
>

More information about the mythtv-users mailing list