[mythtv-users] Starting the HD3000 journey...again

Kelly navykel at gmail.com
Sat Apr 23 02:08:19 UTC 2005


I took some time off before trying again. 

I'm following Jarod's guide up to the DVB part. He says he has his
working without problems only using the stock install and linuxtv-dvb.
I Installed the linuxtv-dvb but when it loads up I get this in my
dmesg:

Linux video capture interface: v1.00
cx2388x blackbird driver version 0.0.4 loaded
cx88[0]: Your board isn't known (yet) to the driver.  You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option.  Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]:    card=0 -> UNKNOWN/GENERIC
cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
cx88[0]:    card=2 -> GDI Black Gold
cx88[0]:    card=3 -> PixelView
cx88[0]:    card=4 -> ATI TV Wonder Pro
cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]:    card=6 -> AverTV Studio 303 (M126)
cx88[0]:    card=7 -> MSI TV- at nywhere Master
cx88[0]:    card=8 -> Leadtek Winfast DV2000
cx88[0]:    card=9 -> Leadtek PVR 2000
cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
cx88[0]:    card=11 -> Prolink PlayTV PVR
cx88[0]:    card=12 -> ASUS PVR-416
cx88[0]:    card=13 -> MSI TV- at nywhere
cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
cx88[0]:    card=15 -> DVICO FusionHDTV DVB-T1
cx88[0]:    card=16 -> KWorld LTV883RF
cx88[0]:    card=17 -> DViCO - FusionHDTV 3 Gold
cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
cx88[0]:    card=19 -> Conexant DVB-T reference design
cx88[0]:    card=20 -> Provideo PV259
cx88[0]:    card=21 -> DVICO FusionHDTV DVB-T Plus
cx88[0]: subsystem: 7063:3000, board: UNKNOWN/GENERIC [card=0,autodetected]
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 193
cx88[0]: Your board isn't known (yet) to the driver.  You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option.  Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]:    card=0 -> UNKNOWN/GENERIC
cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
cx88[0]:    card=2 -> GDI Black Gold
cx88[0]:    card=3 -> PixelView
cx88[0]:    card=4 -> ATI TV Wonder Pro
cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]:    card=6 -> AverTV Studio 303 (M126)
cx88[0]:    card=7 -> MSI TV- at nywhere Master
cx88[0]:    card=8 -> Leadtek Winfast DV2000
cx88[0]:    card=9 -> Leadtek PVR 2000
cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
cx88[0]:    card=11 -> Prolink PlayTV PVR
cx88[0]:    card=12 -> ASUS PVR-416
cx88[0]:    card=13 -> MSI TV- at nywhere
cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
cx88[0]:    card=15 -> DVICO FusionHDTV DVB-T1
cx88[0]:    card=16 -> KWorld LTV883RF
cx88[0]:    card=17 -> DViCO - FusionHDTV 3 Gold
cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
cx88[0]:    card=19 -> Conexant DVB-T reference design
cx88[0]:    card=20 -> Provideo PV259
cx88[0]:    card=21 -> DVICO FusionHDTV DVB-T Plus
cx88[0]: subsystem: 7063:3000, board: UNKNOWN/GENERIC [card=0,autodetected]
cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 193, latency: 32, mmio:
0xdd000000
tuner: chip found at addr 0xc2 i2c-bus cx88[0]
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: cx88: tvaudio thread started
cx88[0]/0: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO



It seems to not reconise the HD3000 card. Will this still work? How do
I setup Mythtv for HDTV OTA?

kel


More information about the mythtv-users mailing list