[mythtv-users] wintv-250 bttv issue on Redhat 9

wlody_randall at cox.net wlody_randall at cox.net
Wed Sep 29 02:35:17 EDT 2004


Hi,

I am at the very early stages of building mythtv.  I recently installed a
WinTV-PVR-250 card into my existing linux box running Redhat 9 kernel 2.4.20-31.9

When I run lspci the wintv card is identified but it also shows up as unknown device.
In addition dmesg shows that bttv is loaded.  However when I run the 
command # lsmod |grep bttv
nothing shows that the bttv modules is loaded.  

At this point I am not sure what to do?  Do I need to
add information to my modules.conf file?


Thanks,
Randall



# lsmod

Module                  Size  Used by    Not tainted
parport_pc             19076   1  (autoclean)
lp                      8996   0  (autoclean)
parport                37056   1  (autoclean) [parport_pc lp]
autofs                 13268   0  (autoclean) (unused)
8139too                18120   1
mii                     3976   0  [8139too]
sg                     36524   0  (autoclean)
sr_mod                 18136   0  (autoclean)
cdrom                  33728   0  (autoclean) [sr_mod]
keybdev                 2976   0  (unused)
mousedev                5556   0  (unused)
hid                    22244   0  (unused)
input                   5856   0  [keybdev mousedev hid]
usb-uhci               26412   0  (unused)
usbcore                79040   1  [hid usb-uhci]
ext3                   70784   2
jbd                    51988   2  [ext3]
aic7xxx               141204   0
sd_mod                 13452   0  (unused)
scsi_mod              107512   4  [sg sr_mod aic7xxx sd_mod]

# lspci

00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 ND [Radeon 9700]
01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9700] (Secondary)
02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:08.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01)
02:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
02:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
02:0a.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)

from lspci -v (abreviated)

02:08.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4009
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2


from dmesg (abreviated):
 
bttv: driver version 0.7.104 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH)




More information about the mythtv-users mailing list