[mythtv-users] nuvexport beta available

[Brian McSpadden]

Tom,

You are having the same problem I had..You are missing the Time::HiRes
perl module.Here's what I did to fix it:

1. From the command line, (probably need to be root), run the command cpan
2. It may ask you about configuration stuff...if you need to configure
a proxy, etc, type yes, otherwise, type no and let it autoconfigure.
3. Once you get to a prompt, type "install Time::HiRes" (without the
quotes). It will go ahead and download and install the module. After
that, nuvexport should load up like a charm!

Brian

On Mon, 27 Sep 2004 02:24:11 -0400, Tom E. Craddock, Jr.
<sigtom at sigtom.com> wrote:
> 
> 
> Chris Petersen wrote:
> 
> > So after much cramming (because I was running out of drive space) by
> > myself and Gavin (aka Beirdo), I am officially announcing the beta
> > release of the new version of nuvexport, available here:
> >
> > http://forevermore.net/files/nuvexport_beta.tar.bz2
> >
> > These changes are NOT in cvs (yet), and the file will change as bugs
> > are found/fixed.  I'm also not organized to have a real change list,
> > but here is the gist of it:
> >
> > Near-complete rewrite from the ground up.  The original nuvexport was
> > a hack, and I didn't know much of anything about transcoding, or plan
> > much for it to be used for anything more than svcd exporting (so it
> > got messy as people submitted new modules).  Other than the nuv+sql
> > and mpeg2cut modules, everything now uses the transcode program,
> > rather than having separate transcode/nontranscode modules (there was
> > a lot of confusion since the old "transcode" modules only worked with
> > mpeg2 files). nuvexport will auto-detect the type of file being
> > transcoded, and use mythtranscode/fifos accordingly.
> >
> > You can now select multiple shows for export (the menus should be
> > pretty easy to understand -- please note the addition of a "confirm"
> > stage, and that adding a "show" with only one episode auto-adds that
> > episode and skips you straight to "confirm").
> >
> > There is now a progress indicator (it's about 99% accurate), and all
> > of the confusing transcode/whatever output is hidden.  I still need to
> > add code to properly pass errors through if something dies.  For now,
> > --debug should still work as it used to.
> >
> > Commandline support is much more organized, but is still a bit lacking
> > in this beta version.  There is no documentation for it as of yet,
> > either.
> >
> > Other things to note..  recordings are now "cropped" before they're
> > exported, to get rid of the broadcast overscan/black border stuff.
> > This will eventually be an option, but I haven't had time to hook it
> > up. Currently, 2-3% is taken off of each edge automatically.
> > Eventually, we'll also add something for letterbox/widescreen
> > cropping, too. Anyway, just keep this in mind when exporting your
> > 640x480 recording, so that you are aware that exporting it to a
> > 640x480 xvid file will actually be stretching the video taller/wider.
> >
> > Integration with mythweb, and the client/server mode are still on the
> > horizon, but nowhere near functional yet in this version (mythweb
> > integration will kick in as soon as the CLI stuff is finished).
> >
> > Things that still need to happen:  add ansi color support to menus
> > (for titles, etc), finish cli/walkthrough separation, documentation,
> > finish porting a few remaining modules, probably some other stuff that
> > I can't think of at the moment.
> >
> > I can be reached here via email, the feedback form on forevermore.net
> > or  often on #mythtv-users (I don't hang out much in the dev channel
> > because most of what goes on there is over my head).  And please
> > remember, this is a beta.  That means it is probably unstable, could
> > wipe your drive, cause hurricanes and/or spontaneously combust nearby
> > politicians.
> >
> > -Chris
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> Chris,
> 
> First off, thanks for the beta.  Been looking forward to backing up alot
> of my recordings.  I tried the beta on yer site a couple of days ago,
> couldnt get it to work, so just waited till you posted this.  Went and
> got the latest version on yer site, and still getting the same
> problems.  Im running FC2 using Jarods Guide, atrpms.net, etc.  I use
> the install.sh, it does its thing, and then when I try to use the
> program, I get the following below:
> 
> [root at sigmachi nuvexport]# sh ./install.sh
> `nuvexport' -> `/usr/local/bin/nuvexport'
> `nuvinfo' -> `/usr/local/bin/nuvinfo'
> `mpeg2cut' -> `/usr/local/bin/mpeg2cut'
> mkdir: created directory `/usr/local/share/nuvexport/export'
> `export/DVCD.pm' -> `/usr/local/share/nuvexport/export/DVCD.pm'
> `export/DVD.pm' -> `/usr/local/share/nuvexport/export/DVD.pm'
> `export/generic.pm' -> `/usr/local/share/nuvexport/export/generic.pm'
> `export/MPEG2_cut.pm' -> `/usr/local/share/nuvexport/export/MPEG2_cut.pm'
> `export/NUV_SQL.pm' -> `/usr/local/share/nuvexport/export/NUV_SQL.pm'
> `export/SVCD.pm' -> `/usr/local/share/nuvexport/export/SVCD.pm'
> `export/transcode.pm' -> `/usr/local/share/nuvexport/export/transcode.pm'
> `export/VCD.pm' -> `/usr/local/share/nuvexport/export/VCD.pm'
> `export/XviD.pm' -> `/usr/local/share/nuvexport/export/XviD.pm'
> mkdir: created directory `/usr/local/share/nuvexport/mythtv'
> `mythtv/db.pm' -> `/usr/local/share/nuvexport/mythtv/db.pm'
> `mythtv/nuvinfo.pm' -> `/usr/local/share/nuvexport/mythtv/nuvinfo.pm'
> `mythtv/recordings.pm' -> `/usr/local/share/nuvexport/mythtv/recordings.pm'
> mkdir: created directory `/usr/local/share/nuvexport/nuv_export'
> `nuv_export/shared_utils.pm' ->
> `/usr/local/share/nuvexport/nuv_export/shared_utils.pm'
> `nuv_export/task.pm' -> `/usr/local/share/nuvexport/nuv_export/task.pm'
> `nuv_export/ui.pm' -> `/usr/local/share/nuvexport/nuv_export/ui.pm'
> [root at sigmachi nuvexport]# nuvexport
> Can't locate Time/HiRes.pm in @INC (@INC contains: /usr/local/bin
> /usr/share/nuvexport /usr/local/share/nuvexport
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/5.8.3/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/5.8.3
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/5.8.2
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/5.8.1
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/5.8.0
> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.3/5.8.3/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.3/5.8.3
> /usr/lib/perl5/site_perl/5.8.3/5.8.2
> /usr/lib/perl5/site_perl/5.8.3/5.8.1
> /usr/lib/perl5/site_perl/5.8.3/5.8.0 /usr/lib/perl5/site_perl/5.8.3
> /usr/lib/perl5/5.8.3/i386-linux-thread-multi /usr/lib/perl5/5.8.3
> /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1
> /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
> /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2
> /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0
> /usr/lib/perl5/vendor_perl .) at
> /usr/local/share/nuvexport/nuv_export/shared_utils.pm line 11.
> BEGIN failed--compilation aborted at
> /usr/local/share/nuvexport/nuv_export/shared_utils.pm line 11.
> Compilation failed in require at /usr/local/bin/nuvexport line 18.
> BEGIN failed--compilation aborted at /usr/local/bin/nuvexport line 18.
> [root at sigmachi nuvexport]#
> 
> Im kind of out of my element, Im not sure if its telling me I dont have
> something installed, or what it means.  Thought Id post it here to see
> if you (or others) could help.  Thanks in advanced.
> 
> Tom E. Craddock, Jr.
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
> 
> 
>