[mythtv-users] 1 step forward, 2 steps back

[Tim Sailer]

I had the tv wonder ve working with the builtin sound, but I wanted
stereo, and 5.1, so I bought a SB Live and pvr-250. The SB was a 
slam dunk, but the 250 is giving me fits. This is what I see when I
'modprobe ivtv'

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.1.10 (0.1.10pre2-ck111t) loading
ivtv: Linux version: 2.6.8 K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7370197
tveeprom: tuner = TCL 2002N (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3445 (type = 12)
ivtv: i2c attach [client=tveeprom[3],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[3],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Sep 23 2004 09:57:24
ivtv: i2c attach [client=MSP3445G-B8,ok]
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 32 131072 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 using 8 131072 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 256 4096 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 8 131072 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4 
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 50
tuner: tuner type not set
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
tuner: tuner type not set
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ====================  END INIT IVTV  ====================

Now, it shows tuner 50, but then says tuner type not set.
Uh, what? Is this the case of too new of a card?

Tim

-- 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>> Tim Sailer                       ><  Coastal Internet, Inc.          <<
>> Network and Systems Operations   ><  PO Box 726                      <<
>> http://www.buoy.com              ><  Moriches, NY 11955              <<
>> tps at buoy.com                     ><  (631) 399-2910  (888) 924-3728  <<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<