[mythtv-users] Pundit-R and No TVout?

[j2]

Well, i had TV out working. Or rather, VGA out of the TVout output.

Then i followed  http://fedorafaq.org/#radeon

To compile the drivers.

Now i get no output on the TV-out.

I also found http://www.rage3d.com/board/showthread.php?t=33781391 which 
said to hex edit two values, but it doesnt correspond to my file. My file 
says
00013B20   00 00 C7 45  EC 00 00 00  00 8B 97 D8  00 00 00 89  So i didtn 
change that.  I am enclosing my X-conf.. Help? Please? :) (fedora Core 2 
installed accoding to Jarods guide). I am In sweden, so that should be 
PAL-M, no? And i would like all output to go to the TV-out (well, or SVIDEO 
really?)

[root at mythbox root]# cat /etc/X11/xorg.conf | grep -v ^#



Section "dri"
    Mode 0666
EndSection

Section "Module"


    Load        "dbe"   # Double buffer extension

    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "freetype"

    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection


Section "Files"


    RgbPath     "/usr/X11R6/lib/X11/rgb"


    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"



EndSection


Section "ServerFlags"















EndSection



Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "Keyboard"


    Option "AutoRepeat" "500 30"






    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc105"
    Option "XkbLayout"  "se"

EndSection



Section "InputDevice"


    Identifier  "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "//dev/input/mice"









EndSection





Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 37.9
    VertRefresh 20 - 60
    Option "DPMS"


EndSection


Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   31.5 - 37.9
    VertRefresh 20 - 60
    Option "DPMS"


EndSection





Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"




    Driver      "vga"




EndSection


Section "Device"
    Identifier                          "ATI Graphics Adapter connector 0"
    Driver                              "fglrx"
    #Option                              "NoDDC"
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    Option "mtrr"                       "off" # disable DRI mtrr mapper, 
driver has its own code for mtrr
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "31.5 - 37.9"
    Option "VRefresh2"                  "20 - 60"
    Option "ScreenOverlap"              "0"
    Option "NoTV"                       "no"
    Option "TVStandard"                 "PAL-SCART"
    Option "TVHSizeAdj"                 "0"
    Option "TVVSizeAdj"                 "0"
    Option "TVHPosAdj"                  "0"
    Option "TVVPosAdj"                  "0"
    Option "TVHStartAdj"                "0"
    Option "TVColorAdj"                 "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
    Option "Capabilities"               "0x00000000"
    Option "VideoOverlay"               "on"
    Option "OpenGLOverlay"              "off"
    Option "CenterMode"                 "off"
    Option "PseudoColorVisuals"         "off"
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    Screen 0
EndSection

Section "Device"
    Identifier                          "ATI Graphics Adapter connector 1"
    Driver                              "fglrx"
    Screen 1
EndSection



Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter connector 0"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
    EndSubsection
EndSection

Section "Screen"
    Identifier  "Screen1"
    Device      "ATI Graphics Adapter connector 1"
    Monitor     "Monitor1"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
    EndSubsection
EndSection



Section "ServerLayout"

    Identifier  "Server Layout"


    Screen "Screen0"
    Screen "Screen1" RightOf "Screen0"


    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

[root at mythbox root]#