[mythtv-users] Capture Problems (Leadtek Winfast 200XP Deluxe)

[Brad Bonkoski]

I have read some general discussion about using the bttv driver versus the ct8xx driver.  Currently I have had the best 'apparent' luck with the bttv driver.  Here is my dmesg output:
server root # dmesg  | grep bttv
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 9, latency: 32, mmio: 0xde000000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init]
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: PLL can sleep, using XTAL (28636363).

Does this look like the device driver is being properly loaded, and the device properly registered?
When I run myth and try to watch TV, I just get a green screen and nothing else.
Any ideas on where to start.

Thanks
-brad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20041015/9b1b85eb/attachment.html