[mythtv-users] ivtv and Hauppauge 250

[T. Waldren]

lspci -v gives me the following about the pvr 250 card


01:06.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)


        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at d4000000 (32-bit, prefetchable)
        Capabilities: [44] Power Management version 2



On Thu, 11 Nov 2004 21:11:14 -0500, PAUL WILLIAMSON
<pwilliamson at mandtbank.com> wrote:
> Looks exactly like mine when I first set it up.  Have you tried
> rebooting the backend?  It is definitely recognizing it.
> 
> What does lspci -v say?
> 
> Paul
> 
> >>> "T. Waldren" <mythtvbox at gmail.com> 11/11/2004 7:56:37 PM >>>
> 
> 
> I ran into a problem, and are not sure where to go from here.   When I
> get to the part in Jarod's guide about testing my PVR 250, my system
> cannot find a video0 (or any other video#) directories.
> 
> On the step where you do /bin/dmesg |grep ivtv, I get the following
> results, which do not include the line that that the guide says we are
> interested in.  I have followed all the steps, and cannot figure out
> why the system does not seem to recognize my PVR 250 card.
> 
> Thanks
> T.Waldren
> 
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.1.10 (0.1.10-48.3_pre2_ck100zz.rhfc2.at) loading
> ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 250 card
> ivtv: Found an iTVC16 based chip
> ivtv: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv: pci: PCIBUS detected device: 0x01e0 vendor: 0x10de
> ivtv: i2c attach [client=tveeprom[0],ok]
> ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model
> 0x00893450, Revision 0x00000000
> ivtv: NTSC tuner detected
> ivtv: Radio detected
> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv: i2c attach [client=(tuner unset),ok]
> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> ivtv: i2c attach [client=saa7115[0],ok]
> ivtv: i2c attach [client=MSP3448W-A2,ok]
> ivtv: Encoder revision: 0x02040024
> ivtv: Configuring WinTV PVR 250 card with 5 streams
> ivtv: Create DMA stream 0 using 128 buffers of size 32768
> ivtv: Create DMA stream 1 using 128 buffers of size 32768
> ivtv: Create stream 2 using 128 buffers of size 52224
> ivtv: Create DMA stream 3 using 128 buffers of size 32768
> ivtv: Create stream 4
> ivtv: Setting Tuner 2
> tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by
> ivtv i2c driver #0
> ivtv: Setting audio matrix to input 3, output 1
> ivtv: Switching standard to NTSC.
> ivtv: Initialized WinTV PVR 250, card #0
> ivtv: ====================  END INIT IVTV  ====================
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>