[mythtv-users] Problem with Mythtv & QTE
Michael Haas
laga at laga.ath.cx
Sun May 30 10:55:33 EDT 2004
Hello Juhka,
thanks for you reply :).
I dont think that my problem is directfb-related. QT embedded is
responsible for the GUI, not directfb ;). (IMHO)
I tried it with the fbdev=/dev/fb1, but it doesn't work.
Anyway, I can use /dev/fb0 for mythtv because only the TV is connected
to the card.
Did you have to setup the correct resolution on the first head, and is
TV-OUT even possible with the first head?
laga
Juha Pahkala wrote:
>Hi,
>
>Just a quick one, don't know if it helps. I'm using a similar setup, but
>my tv is on fb0. You could try adding 'fbdev=/dev/fb1' to your
>directfbrc if it helps. Also, I don't use the 'matrox-crtc2' option in
>directfbrc, you could try if disabling that will help.
>
>juhis
>
>On Sun, 2004-05-30 at 15:57, Michael Haas wrote:
>
>
>>Hello!
>>I'm currently trying to use Mythtv with QT embedded on a Matrox G400.
>>It built fine, and now I'm stuck. My TV is connected to /dev/fb1, so I
>>have to setup $QWS_DISPLAY properly. I did, but my TV stays dark. No
>>Picture.
>>When QWS_DISPLAY is set to /dev/fb0, where an old CRT is connected to, I
>>get an picture on my CRT. It doesnt look good (8 bit maybe), but hey, I
>>can see something ;).
>>I simply loaded some matroxfb modules into the kernel, linked mplayer
>>1.0.pre3try2 against directfb 0.9.20 and got a perfect picture on the tv
>>using mplayer -vo dfbmga.
>>My version of QTE is 3.3.2.
>>
>>If anyone has any suggestions, please let me know! I'm becoming
>>desperate :(.
>>
>>Here is some debugging information, I don't know if it matters, but it
>>won't hurt ;):
>>
>>lsmod:
>>================================================
>>Module Size Used by Not tainted
>>input 3200 0 (autoclean)
>>i2c-dev 4356 0
>>matroxfb_proc 1704 0 (unused)
>>matroxfb_crtc2 8116 1
>>i2c-matroxfb 2356 0
>>matroxfb_base 20996 62 [matroxfb_proc matroxfb_crtc2
>>i2c-matroxfb]
>>matroxfb_Ti3026 5752 0 [matroxfb_base]
>>matroxfb_g450 4548 0 [matroxfb_base]
>>matroxfb_DAC1064 9328 0 [matroxfb_crtc2 matroxfb_base]
>>g450_pll 3248 0 [matroxfb_g450 matroxfb_DAC1064]
>>matroxfb_accel 10184 0 [matroxfb_base matroxfb_Ti3026
>>matroxfb_DAC1064]
>>fbcon-cfb4 2280 0 [matroxfb_accel]
>>matroxfb_misc 8512 0 [matroxfb_crtc2 i2c-matroxfb
>>matroxfb_base matroxfb_Ti3026 matroxfb_g450 matroxfb_DAC1064 g450_pll
>>matroxfb_accel]
>>snd-pcm-oss 37860 1
>>snd-mixer-oss 12536 0 [snd-pcm-oss]
>>nfsd 67536 8
>>parport_pc 14820 0 (unused)
>>parport 23400 0 [parport_pc]
>>uhci 24508 0 (unused)
>>usbcore 59436 1 [uhci]
>>snd-bt87x 5284 0
>>snd-ens1371 11456 1
>>gameport 1420 0 [snd-ens1371]
>>snd-pcm 55880 0 [snd-pcm-oss snd-bt87x snd-ens1371]
>>snd-timer 13572 0 [snd-pcm]
>>snd-page-alloc 6324 0 [snd-bt87x snd-pcm]
>>snd-rawmidi 12736 0 [snd-ens1371]
>>snd-seq-device 3872 0 [snd-rawmidi]
>>snd-ac97-codec 44476 0 [snd-ens1371]
>>snd 30340 0 [snd-pcm-oss snd-mixer-oss snd-bt87x
>>snd-ens1371 snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec]
>>3c59x 25648 1
>>bttv 94816 0 (autoclean) (unused)
>>soundcore 3396 10 (autoclean) [snd bttv]
>>lirc_i2c 4416 0
>>lirc_dev 8592 1 [lirc_i2c]
>>ivtv 79300 1
>>msp3400 16448 1
>>saa7115 5888 0 (unused)
>>tuner 10248 2
>>i2c-algo-bit 7144 5 [i2c-matroxfb bttv ivtv]
>>i2c-core 12836 0 [i2c-dev bttv lirc_i2c ivtv msp3400
>>saa7115 tuner i2c-algo-bit]
>>videodev 5952 5 [bttv ivtv]
>>ide-scsi 9360 0
>>agpgart 44036 0 (unused)
>>========================================================
>>
>>dfbinfo:
>>
>>==============================
>>(*) parsing config file '/etc/directfbrc'.
>>
>> ---------------------- DirectFB v0.9.20 ---------------------
>> (c) 2000-2002 convergence integrated media GmbH
>> (c) 2002-2003 convergence GmbH
>> -----------------------------------------------------------
>>
>>(*) Single Application Core. (with MMX support) (2004-05-28 11:46)
>>(*) DirectFB/misc/memcpy: using MMXEXT optimized memcpy()
>>(*) DirectFB/InputDevice: LIRC Device 0.2 (convergence integrated media
>>GmbH)
>>(*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media GmbH)
>>(*) MMX detected and enabled
>>(*) DirectFB/GraphicsDevice: Matrox G400/G450/G550 0.6 (convergence
>>integrated media GmbH)
>>(*) DirectFB/Layer: Enabled 'FBDev Primary Layer'.
>>
>>Display Layers
>>
>>(00) FBDev Primary Layer (primary layer)
>> Type: graphics
>> Caps: brightness contrast saturation surface
>>
>>(01) Matrox Backend Scaler
>> Type: graphics picture video
>> Caps: brightness contrast deinterlacing dst_colorkey
>>screen_location surface
>>
>>(02) Matrox CRTC2
>> Type: graphics picture video
>> Caps: brightness contrast flicker_filtering hue saturation surface
>>
>>(03) Matrox CRTC2 Sub-Picture
>> Type: graphics picture video
>> Caps: alphachannel opacity surface
>>
>>
>>Input Devices
>>
>>(03) LIRC Device (primary remote control)
>> Type: remote
>> Caps: keys
>>
>>(00) Keyboard (primary keyboard)
>> Type: keyboard
>> Caps: keys
>>==============================================
>>
>>cat /etc/directfb
>>
>> ============================================
>>matrox-crtc2
>>matrox-tv-standard=pal
>>==========================================
>>
>>
>>cat /proc/fb
>>
>>=============================================
>>0 MATROX VGA
>>1 MATROX CRTC2
>>=============================================
>>_______________________________________________
>>mythtv-users mailing list
>>mythtv-users at mythtv.org
>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
More information about the mythtv-users
mailing list