[mythtv-users] TV-Out with a PNY Gforce 4 MX 440
Markus
markus at charlemagne.net
Fri Jun 11 00:18:25 EDT 2004
Ok,
With the suggestions, it gets all the way through the boot up, I see the
Nvidia screen, the Fedora splash loads all the way through, then when KDE
should load 'bam!' no signal warning from the monitor (nothing on the TV
either). So...I feel I must be close?
Here's my latest XF86Config File..
----- Original Message -----
From: "Richard Baker" <kingofthecounty at yahoo.com>
To: <mythtv-users at mythtv.org>
Sent: Thursday, June 10, 2004 5:14 AM
Subject: Re: [mythtv-users] TV-Out with a PNY Gforce 4 MX 440
> Your config
>
> Section "Device"
> Identifier "Videocard0"
> >>>>>>>>>>> Driver "nv"
> VendorName "Videocard vendor"
> BoardName "NVIDIA GeForce 4 MX (generic)"
> Option "NvAGP" "1"
> Option "usevnc" "on"
> Option "useraccept" "off"
> EndSection
>
> ===================================
> I think it should read
>
> Section "Device"
> Identifier "Videocard0"
> >>>>>>>>> Driver "nvidia"
> VendorName "Videocard vendor"
> BoardName "NVIDIA GeForce 4 MX (generic)"
> Option "NvAGP" "1"
> Option "usevnc" "on"
> Option "useraccept" "off"
> EndSection
>
> ================================================
> Your config
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "HP D2846 P1100 21-inch Monitor"
> DisplaySize 400 300
> HorizSync 30.0 - 107.0
> VertRefresh 48.0 - 160.0
> Option "dpms"
> Option "TV" "yes"
> Option "TwinView"
> Option "SecondMonitorHorizSync" "30.0-50.0"
> Option "SecondMonitorVertRefresh" "60.0"
> Option "TwinViewOrientation" "Clone"
> #Option "TwinViewOrientation" "LeftOf"
> Option "MetaModes" "1024x768,1024x768"
> Option "TVStandard" "NTSC-M"
> Option "TVOutFormat" "COMPOSITE"
> Option "RenderAccel" "1"
> Option "TVOverScan" "0.6"
> EndSection
> ======================================================
> I think it should read
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "HP D2846 P1100 21-inch Monitor"
> DisplaySize 400 300
> HorizSync 30.0 - 107.0
> VertRefresh 48.0 - 160.0
> Option "dpms"
> Option "TV" "yes"
> Option "TwinView"
> Option "SecondMonitorHorizSync" "30.0-50.0"
> Option "SecondMonitorVertRefresh" "60.0"
> Option "TwinViewOrientation" "Clone"
> #Option "TwinViewOrientation" "LeftOf"
> Option "MetaModes" "1024x768,1024x768"
> Option "TVStandard" "NTSC-M"
> >>>>> should this be SVIDEO?? >>>>> Option
> "TVOutFormat" "COMPOSITE"
> Option "RenderAccel" "1"
> # >>>> remove >>>> Option "TVOverScan" "0.6"
> EndSection
>
>
-------------- next part --------------
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name
of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules/extensions/nvidia"
ModulePath "/usr/X11R6/lib/modules/extensions"
ModulePath "/usr/X11R6/lib/modules"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "v4l"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "HP D2846 P1100 21-inch Monitor"
DisplaySize 400 300
HorizSync 30.0 - 107.0
VertRefresh 48.0 - 160.0
Option "dpms"
Option "TV" "yes"
Option "TwinView"
Option "SecondMonitorHorizSync" "30.0-50.0"
Option "SecondMonitorVertRefresh" "60.0"
Option "TwinViewOrientation" "Clone"
#Option "TwinViewOrientation" "LeftOf"
Option "MetaModes" "800x600,640x480"
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "RenderAccel" "1"
# Option "TVOverScan" "0.6"
Option "ConnectedMonitor" "CRT,TV"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "PNY"
BoardName "NVIDIA GeForce 4 MX (generic)"
Option "NvAGP" "1"
Option "usevnc" "on"
Option "useraccept" "off"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
More information about the mythtv-users
mailing list