[mythtv-users] PVR 250 and channels
Jesper FA
list at j-f.dk
Thu Jun 10 16:28:36 EDT 2004
I bought a PVR 250 and wanted to use it with myth.
I have got the drivers loaded and it seems to work.
I have configured myth with the card using /dev/video0 and /dev/vbi0. Sound I
can only choose /dev/dsp is that right? I have selected default input as
Tuner 0. The problem is all I get is static noise. I live in Denmark so I
have tried setting frequencies manually. I have tried different numbers but
no change. Btw. is it in MHz your are setting the frequency
I have also tried playing /dev/video0 with mplayer and use ivtvctl to set
frequency. Still only static. I have tried the cable in use on a TV and the
signal is fine.
In dmesg I get the following errors. Does they matter?
ivtv: i2c client addr: 0x61 not found!
ivtv: i2c client addr: 0x40 not found!
I guess maybe the problem is that mythbackend writes the following when I try
to change channel.
...
2004-06-10 22:23:39 CheckChannel failed. Please verify channel "68" in the
"setup" Channel Editor.
2004-06-10 22:23:39 CheckChannel failed. Please verify channel "69" in the
"setup" Channel Editor.
2004-06-10 22:23:39 CheckChannel failed. Please verify channel "E2" in the
"setup" Channel Editor.
2004-06-10 22:23:39 Error, couldn't find any available channels.
2004-06-10 22:23:39 Your database is most likely setup incorrectly.
--
Jesper
22:11:58 up 4 days, 21:09, 2 users, load average: 1.28, 1.24, 1.21
More information about the mythtv-users
mailing list