[mythtv-users] Re: Nvidia problem with atrpms kernel.

[Bryan Ware]

Here is the output.. 
[root at myth-be1 etc]# nvidia-graphics-switch 4363
depmod: *** Unresolved symbols in
/lib/modules/2.4.22-1.2188.nptl_48.rhfc1.at/misc/lirc_dev.o

As for running the command on the box in runlevel 3, it will have to
wait til I get home in 6 hours. I am sshed into it from work right now.

Thanks,
Bryan

On Tue, 2004-06-01 at 11:40, Axel Thimm wrote:
> On Tue, Jun 01, 2004 at 11:27:14AM -0400, Bryan Ware wrote:
> > I do have that in the modules.conf. I did use the ATrpms from your site.
> > So what am i doing wrong?? do I need to move them out of  /lib/modules
> > if they are not in the right location?
> 
> Please give us the output of /usr/sbin/nvidia-graphics-switch. Then
> try running
> /usr/sbin/nvidia-graphics-switch 4363
> (best in runlevel 3)
> 
> check that "lsmod | grep nvidia" gives no output and restart X.
> 
> If that fixes your setup, there was something wrong with the
> installation, as the above command is automatically executed upon
> installation of the rpms.
> 
> > Bryan
> > 
> > On Tue, 2004-06-01 at 10:50, Axel Thimm wrote:
> > > On Tue, Jun 01, 2004 at 08:36:48AM -0400, Bryan Ware wrote:
> > > > rpm -qa \*nvidia\* output:
> > > > 
> > > > nvidia-graphics4363-libs-1.0_4363-54.rhfc1.at
> > > > kernel-module-nvidia-graphics4363-2.4.22-1.2188.nptl-1.0_4363-54.rhfc1.at
> > > > nvidia-graphics-helpers-0.0.3-3.at
> > > > nvidia-graphics4363-devel-1.0_4363-54.rhfc1.at
> > > > nvidia-graphics4363-1.0_4363-54.rhfc1.at
> > > > 
> > > 
> > > On Tue, Jun 01, 2004 at 10:22:31AM -0400, Bryan Ware wrote:
> > > > I installed this via Jarod's excellent guide. I would assume that atrpms
> > > > would get all of the dependencies I would need. Is that not the case?
> > > > 
> > > > Should I have two lib modules??
> > > > /usr/X11R6/lib/modules/drivers/nvidia_drv.o
> > > > /usr/X11R6/lib/modules/drivers/nvidia-1.0-4363_drv.o
> > > 
> > > These are not the kernel modules (these are under /lib/module/)
> > > 
> > > If you installed the ATrpms rpms, you should have the following on
> > > your modules.conf:
> > > 
> > > # nvidia kernel module
> > > alias char-major-195 nvidia-1.0-4363
> > > 
> > > which makes every access to the nvidia devices to load the module.
> > > 
> > > If you are missing this lines run
> > > 
> > > /usr/sbin/nvidia-graphics-switch 4363
> > > 
> > > This is called upon installation of
> > > nvidia-graphics4363-1.0_4363-54.rhfc1.at.
> > > 
> > > Perhaps yum pulled the packages in the wrong order (userland
> > > installed before kernel modules?)
> 
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
-- 
Bryan Ware <bryan at hb-computers.com>