[mythtv-users] mplayer works but NOT in via mythvideo...

Wed Jul 14 23:25:41 EDT 2004

Ok I apologize but it seems that make clean, and recompile has fixed
this. Sorry to have bothered you all but I'm happy again :)

Eric

My MythBox:
Athlon XP 2000+, MSI K7N2GM-L, 512MB Kbyte, 80GB Seagate Single Platter,
2xPVR250 Coolmax CX300B Silent PSU, Coolermaster ATC-610BX1 Case, Fedora
Core 1, 2.4.22-1.2179 kernel, ivtv-0.1.9, myth 0.15.20040505.1

> -----Original Message-----
> From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> bounces at mythtv.org] On Behalf Of Nowhere
> Sent: Wednesday, July 14, 2004 7:59 PM
> To: 'Discussion about mythtv'
> Subject: RE: [mythtv-users] mplayer works but NOT in via mythvideo...
> 
> Just a quick addition: I can run mythfrontend, alt-tab back to the
> terminal window, type in the mplayer command line and it works fine
with
> sound. Still launching from mythvideo I get no sound. :(
> 
> e.
> 
> My MythBox:
> Athlon XP 2000+, MSI K7N2GM-L, 512MB Kbyte, 80GB Seagate Single
Platter,
> 2xPVR250 Coolmax CX300B Silent PSU, Coolermaster ATC-610BX1 Case,
Fedora
> Core 1, 2.4.22-1.2179 kernel, ivtv-0.1.9, myth 0.15.20040505.1
> 
> 
> > -----Original Message-----
> > From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> > bounces at mythtv.org] On Behalf Of Nowhere
> > Sent: Wednesday, July 14, 2004 7:10 PM
> > To: MythTV Users
> > Subject: [mythtv-users] mplayer works but NOT in via mythvideo...
> >
> > Since upgrading to the latest CVS I am unable to get any sound from
> > mplayer when using mythvideo. If I launch the identical commandline
> from
> > a terminal as that which is set up in myth, mplayer works fine.
> >
> > I have a couple errors that are displayed when launching mplayer but
> > they are identical in mythvideo (no sound) and from the command
line.
> I
> > sent each to a txt file and did a diff with no differences. Below I
> have
> > included the log data.
> >
> > I am about to try recompiling mythvideo because I cannot think of
> > anything to try. Please let me know if you have any ideas.
> >
> > Thanks,
> > Eric
> >
> > My MythBox:
> > Athlon XP 2000+, MSI K7N2GM-L, 512MB Kbyte, 80GB Seagate Single
> Platter,
> > 2xPVR250 Coolmax CX300B Silent PSU, Coolermaster ATC-610BX1 Case,
> Fedora
> > Core 1, 2.4.22-1.2179 kernel, myth 0.15.20040505.1
> >
> > ========================================================
> > == WORKS ===============================================
> > ========================================================
> > [mythtv at localhost videos]$ mplayer -fs -zoom -quiet -vo xv -ao
alsa1x
> > Farscape101\ -\ Premiere.avi
> > mplayer:
> > /usr/X11R6/lib/nvidia-graphics-1.0-4363/libXvMCNVIDIA_dynamic.so.1:
no
> > version information available (required by mplayer)
> > MPlayer 1.0pre4-3.3.2 (C) 2000-2004 MPlayer Team
> >
> > CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1665 MHz
> (Family:
> > 6, Stepping: 1)
> > Detected cache-line size is 64 bytes
> > CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
> > Reading config file /etc/mplayer/mplayer.conf
> > Reading config file /home/mythtv/.mplayer/config
> > Reading /home/mythtv/.mplayer/codecs.conf: Can't open
> > '/home/mythtv/.mplayer/codecs.conf': No such file or directory
> > Reading /etc/mplayer/codecs.conf: Can't open
> '/etc/mplayer/codecs.conf':
> > No such file or directory
> > Using built-in default codecs.conf.
> > font: can't open file: /home/mythtv/.mplayer/font/font.desc
> > Font /usr/share/mplayer/font/font.desc loaded successfully! (206
> chars)
> > Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
> > Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your
> system
> > startup scripts.
> > Using usleep() timing
> > Can't open input config file /home/mythtv/.mplayer/input.conf: No
such
> > file or directory
> > Can't open input config file /etc/mplayer/input.conf: No such file
or
> > directory
> > Falling back on default (hardcoded) input config
> > Opening joystick device /dev/input/js0
> > Can't open joystick device /dev/input/js0 : No such device
> > Can't init input joystick
> > Setting up LIRC support...
> >
> > Playing Farscape101 - Premiere.avi.
> > AVI file format detected.
> > VIDEO:  [DIV3]  512x352  24bpp  25.000 fps  809.0 kbps (98.8
kbyte/s)
> >
>
========================================================================
> > ==
> > Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> > MP3lib: init layer2&3 finished, tables done
> > AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128.0
> kbit)
> > Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2,
layer-3)
> >
>
========================================================================
> > ==
> > vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" =>
local
> > display)
> >
>
========================================================================
> > ==
> > Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> > Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS
MPEG-4
> > v3))
> >
>
========================================================================
> > ==
> > Checking audio filter chain for 48000Hz/2ch/16bit ->
> > 48000Hz/2ch/16bit...
> > AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
> > AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
> > alsa-init: requested format: 48000 Hz, 2 channels, Signed 16-bit
> > (Little-Endian)
> > alsa-init: 1 soundcard found, using: hw:0,0
> > alsa1x: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit
> > Little Endian
> > AO: [alsa1x] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
> > Building audio filter chain for 48000Hz/2ch/16bit ->
> > 48000Hz/2ch/16bit...
> > Starting playback...
> > VDec: vo config request - 512 x 352 (preferred csp: Planar YV12)
> > VDec: using Planar YV12 as output csp (no 0)
> > Movie-Aspect is undefined - no prescaling applied.
> > VO: [xv] 512x352 => 512x352 Planar YV12  [fs] [zoom]
> >
> > ========================================================
> > == Doesnt WORK =========================================
> > ========================================================
> > [mythtv at localhost videos]$ mythfrontend&
> > [1] 8376
> > [mythtv at localhost videos]$ 2004-07-14 18:25:00 mythfrontend version:
> > 0.15.20040528-1 www.mythtv.org
> > 2004-07-14 18:25:00 Enabled verbose msgs : important general
> > 2004-07-14 18:25:01 Registering Internal as a media playback plugin.
> > Unable to initialize plugin 'mythbookmarkmanager'.
> > Unable to initialize plugin 'mythdvd'.
> > 2004-07-14 18:25:01 Registering MythMusic Media Handler as a media
> > handler
> > Unable to initialize plugin 'mythnews'.
> > mplayer:
> > /usr/X11R6/lib/nvidia-graphics-1.0-4363/libXvMCNVIDIA_dynamic.so.1:
no
> > version information available (required by mplayer)
> > MPlayer 1.0pre4-3.3.2 (C) 2000-2004 MPlayer Team
> >
> > CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1665 MHz
> (Family:
> > 6, Stepping: 1)
> > Detected cache-line size is 64 bytes
> > CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
> > Reading config file /etc/mplayer/mplayer.conf
> > Reading config file /home/mythtv/.mplayer/config
> > Reading /home/mythtv/.mplayer/codecs.conf: Can't open
> > '/home/mythtv/.mplayer/codecs.conf': No such file or directory
> > Reading /etc/mplayer/codecs.conf: Can't open
> '/etc/mplayer/codecs.conf':
> > No such file or directory
> > Using built-in default codecs.conf.
> > font: can't open file: /home/mythtv/.mplayer/font/font.desc
> > Font /usr/share/mplayer/font/font.desc loaded successfully! (206
> chars)
> > Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
> > Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your
> system
> > startup scripts.
> > Using usleep() timing
> > Can't open input config file /home/mythtv/.mplayer/input.conf: No
such
> > file or directory
> > Can't open input config file /etc/mplayer/input.conf: No such file
or
> > directory
> > Falling back on default (hardcoded) input config
> > Opening joystick device /dev/input/js0
> > Can't open joystick device /dev/input/js0 : No such device
> > Can't init input joystick
> > Setting up LIRC support...
> >
> >
> >
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users