[mythtv-users] What's happening??? (Newbie)

Douglas Beck beckd at dig-concepts.com
Thu Jan 15 22:45:46 EST 2004


Are you using lircd for anything?  If not, you can just disable the service.


Sean Stagg wrote:

> Sorry for the long email, I've followed wilsonet.com/mythtv/ and have 
> run into some errors: PLEASE HELP! Motherboard is Epox 8rda+, nforce2
>
> At startup
> localhost lm_sensors: Starting up sensors:
> localhost lm_sensors: Can't access /proc file
> localhost lm_sensors:
> localhost lm_sensors: Unable to find i2c bus information;
> localhost lm_sensors: For 2.6 kernels, make sure you have mounted sysfs!
> localhost lm_sensors: For older kernels, make sure you have done 
> 'modprobe i2c-proc'!
> localhost rc: Starting lm_sensors:  failed
>
> At shutdown
> localhost lircd: lircd shutdown failed
>
> [root at localhost azureus]# /sbin/service lircd status
> lircd (pid 9669) is running...
>
> shortly after my cpu goes to 10% idle...
> [root at localhost azureus]# /sbin/service lircd status
> lircd dead but subsys locked
>
> /sbin/service lircd stop
> Stopping infrared remote control daemon:                   [FAILED]
>
> My modules.conf file:
> path[toplevel]=/lib/modules/`uname -r`/updates
> # default path
> path[toplevel]=/lib/modules/`uname -r`
> alias char-major-81 videodev
> alias usb-controller usb-ohci
> alias usb-controller1 ehci-hcd
> #alias usb-interface usb-ohci
> # Include this in your /etc/modules.conf
> # Be sure that there are no other bttv/i2c related module-options around!
> # Generated by find_tvcardoptions.sh
> # i2c
> alias char-major-89 i2c-dev
> options i2c-core i2c_debug=1
> options i2c-algo-bit bit_test=1
> # bttv
> alias char-major-81-0 bttv
> options bttv card=10 pll=0
> options tuner type=8 debug=0
> options msp3400 once=1 simple=1
> post-install bttv modprobe tuner; modprobe videodev
> #alias eth0 nvnet
> alias eth0 nvnet
> alias usb-interface usb-ohci
> # nvidia kernel module
> alias char-major-195 nvidia-1.0-4363
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 1.0.1 ---
> alias char-major-116 snd
> alias char-major-14 soundcore
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
> alias snd-card-0 snd-emu10k1
> alias sound-slot-0 snd-emu10k1
> options snd-emu10k1 enable_ir=1
> # --- END: Generated by ALSACONF, do not edit. ---
>
> Why/how am I getting these errors?? Please help
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>  
>



More information about the mythtv-users mailing list