[mythtv-users] mythmusic hangs every 2sec when playing from CD

[Oliver Stabel]

Hi,

I have mythmusic installed from CVS, Feb 8th.
When playing a CD, mythmusic hangs every two or three seconds
and continues playing the song afterwards, only to hang again.
So its play, hang, play, hang and so on.
(Ripping a song and converting to flac works btw without any hiccups)
Also, while playing from CD, the HD Led (the one from the case
which is connected to IDE0) goes on.
DMA is enabled for all drives:

/dev/hda:
 multcount    = 16 (on)
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  1 (on)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 9729/255/63, sectors = 156301488, start = 0

/dev/hdb:
 multcount    = 16 (on)
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  1 (on)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 14593/255/63, sectors = 234441648, start = 0

(DVD-ROM used for playing)
/dev/hdd:
 HDIO_GET_MULTCOUNT failed: Invalid argument
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  1 (on)
 readonly     =  1 (on)
 readahead    =  8 (on)
 HDIO_GETGEO failed: Invalid argument

ATAPI CD-ROM, with removable media
        Model Number:       TOSHIBA DVD-ROM SD-M1502
        Serial Number:      1100701263
        Firmware Revision:  1012
Standards:
        Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
        Supported: CD-ROM ATAPI-2
Configuration:
        DRQ response: 50us.
        Packet size: 12 bytes
Capabilities:
        LBA, IORDY(can be disabled)
        Buffer size: 128.0kB
        DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns

Any ideas?

Thanks,
 Oliver