[mythtv-users] FC3 and IVTV problems
VJ
vj at vijaygill.homelinux.net
Sun Dec 5 11:55:57 UTC 2004
----- Original Message -----
From: <jvolckaert at chartermi.net>
To: <mythtv-users at mythtv.org>
Sent: Saturday, December 04, 2004 9:05 PM
Subject: [mythtv-users] FC3 and IVTV problems
> Hello Everybody,
>
> I just reinstalled my server with FC3 (from RH9) using Jarod's Guide.
> Everything is running except IVTV (i.e. cannot watch TV).
>
> Here is a snip from my /var/log/messages after loading ivtv:
> *****************
> Dec 4 15:57:51 24 kernel: ivtv: i2c client addr: 0x50 not found!
> Dec 4 15:57:51 24 kernel: ivtv: Error -19 reading Hauppauge eeprom.
> Dec 4 15:57:51 24 kernel: ivtv: Possible causes: the tveeprom module was
> not loaded, or
> Dec 4 15:57:51 24 kernel: ivtv: the eeprom kernel module was loaded
> before the tveeprom module.
> *****************
>
> Any ideas what is causing the error reading eeprom?
>
> Thanks,
> Jeff
>
>
> Here is the full version of messages if it helps any:
> Dec 4 15:57:49 24 kernel: ivtv: ==================== START INIT IVTV
> ====================
> Dec 4 15:57:49 24 kernel: ivtv: version 0.1.10
> (0.1.10-48.3_pre2_ck100zz.rhfc3.at) loading
> Dec 4 15:57:49 24 kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686
> REGPARM 4KSTACKS gcc-3.4
> Dec 4 15:57:49 24 kernel: ivtv: In case of problems please include the
> debug info
> Dec 4 15:57:49 24 kernel: ivtv: between the START INIT IVTV and END INIT
> IVTV lines when
> Dec 4 15:57:49 24 kernel: ivtv: mailing the ivtv-devel mailinglist.
> Dec 4 15:57:49 24 kernel: ivtv: Autodetected WinTV PVR 250 card
> Dec 4 15:57:49 24 kernel: ivtv: Found an iTVC16 based chip
> Dec 4 15:57:49 24 kernel: ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11
> (level, low) -> IRQ 11
> Dec 4 15:57:49 24 kernel: ivtv: pci: VIA detected device: 0x0305 vendor:
> 0x1106
> Dec 4 15:57:49 24 kernel: ivtv: i2c attach [client=eeprom,ok]
> Dec 4 15:57:50 24 last message repeated 7 times
> Dec 4 15:57:50 24 kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
> driver #0
> Dec 4 15:57:50 24 kernel: ivtv: i2c attach [client=(tuner unset),ok]
> Dec 4 15:57:50 24 kernel: tuner: type set to 2 (Philips NTSC
> (FI1236,FM1236 and compatibles)) by insmod option
> Dec 4 15:57:50 24 kernel: tuner: The type=<n> insmod option will go away
> soon.
> Dec 4 15:57:50 24 kernel: tuner: Please use the tuner=<n> option provided
> by
> Dec 4 15:57:50 24 kernel: tuner: tv aard core driver (bttv, saa7134, ...)
> instead.
> Dec 4 15:57:50 24 kernel: saa7115: starting probe for adapter ivtv i2c
> driver #0 (0x10005)
> Dec 4 15:57:50 24 kernel: saa7115: detecting saa7115 client on address
> 0x42
> Dec 4 15:57:50 24 kernel: saa7115: writing init values
> Dec 4 15:57:50 24 kernel: ivtv: i2c attach [client=saa7115[6],ok]
> Dec 4 15:57:50 24 kernel: saa7115: status: (1E) 0x95, (1F) 0xb1
> Dec 4 15:57:51 24 kernel: msp34xx: init: chip=MSP3435G-B6 +nicam +simple
> +simpler +radio mode=simpler
> Dec 4 15:57:51 24 kernel: ivtv: i2c attach [client=MSP3435G-B6,ok]
> Dec 4 15:57:51 24 kernel: ivtv: i2c client addr: 0x50 not found!
> Dec 4 15:57:51 24 kernel: ivtv: Error -19 reading Hauppauge eeprom.
> Dec 4 15:57:51 24 kernel: ivtv: Possible causes: the tveeprom module was
> not loaded, or
> Dec 4 15:57:51 24 kernel: ivtv: the eeprom kernel module was loaded
> before the tveeprom module.
> Dec 4 15:57:52 24 kernel: ivtv: Encoder revision: 0x02040024
> Dec 4 15:57:52 24 kernel: ivtv: Configuring WinTV PVR 250 card with 4
> streams
> Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 0 using 128 buffers of
> size 32768
> Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 1 using 128 buffers of
> size 32768
> Dec 4 15:57:52 24 kernel: ivtv: Create stream 2 using 128 buffers of size
> 52224
> Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 3 using 128 buffers of
> size 32768
> Dec 4 15:57:52 24 kernel: ivtv: Could not detect tuner standard,
> defaulting to NTSC.
> Dec 4 15:57:52 24 kernel: ivtv: Setting audio matrix to input 3, output 1
> Dec 4 15:57:52 24 kernel: ivtv: Switching standard to NTSC.
> Dec 4 15:57:52 24 kernel: saa7115: decoder set norm NTSC
> Dec 4 15:57:52 24 kernel: saa7115: set audio: 0x01
> Dec 4 15:57:52 24 kernel: ivtv: Initialized WinTV PVR 250, card #0
> Dec 4 15:57:52 24 kernel: ivtv: ==================== END INIT IVTV
> ====================
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
Did you follow the install instructions properly? Try to look for firmware
related stuff for installation.
VJ
More information about the mythtv-users
mailing list