[mythtv-users] PVR 350 TV-Out Frame Dropping

[Brett Lucey]

PVR 350 TV-Out Frame DroppingHi Jim,

It sounds like you are running MythTV on the framebuffer, but aren't using the Hardware decoding.  Go into the Setup menu, and select the Playback Setup.  The second page allows you to enable Hardware 350 decoding.  Make sure that's enabled.

-Brett

  ----- Original Message ----- 
  From: Sager, Jim 
  To: MythTV-Users List (E-mail) 
  Sent: Friday, October 24, 2003 11:07 AM
  Subject: [mythtv-users] PVR 350 TV-Out Frame Dropping


  I am new to Linux so please bear with any ignorance that I may display. First off, here is my hardware setup: 

  ASUS P3V4X Motherboard (VIA Apollo Pro133A Chipset) 
  Pentium III 1Ghz Processor 
  384Mb of RAM 
  STB Velocity 4400 RIVATNT AGP Graphics Card (TV-Out is not being used) 
  ViewSonic GT775 Monitor 
  Netgear MA311 802.11b Wireless PCI Adapter 
  Hauppauge PVR 350 
  Western Digital WD1200PJ 120G Hard Drive (7200 RPM, 8Mb Buffer) 
  SoundBlaster Live! 
  Gentoo Linux (Kernel 2.4.20-gentoo-r6) 
  KDE 3 

  I loaded the latest nvidia driver for my graphics card. I installed the latest ivtv alpha release, which supports tv-out for the PVR 350. To compile the driver I had to change the line in ivtv-fb.c that reads "pte_offset(pmd_offset" to "pte_offset_kernel(pmd_offset". I modified the XF86Config file for dual-display as noted in ivtv-fb.c, using the appropriate framebuffer device, which is  "/dev/fb0", and the appropriate BusID obtained using "lspci -v", which is "0:10:0". I updated modules.conf as follows: 

  alias char-major-81 videodev 
  alias char-major-81-0 ivtv 
  alias char-major-61 lirc_i2c 
  options ivtv debug=1 
  options tuner type=2 
  options msp3400 once=1 simple=1 
  options saa7127 pal=0 enable_output=1 output_select=0 
  add below ivtv msp3400 saa7115 tuner 
  add above lirc_dev lirc_i2c 

  I set modules.autoload to load the modules in the following order nvidia, ivtv, ivtv-fb and saa7127. I downloaded and installed MythTV version 0.12, enabling native ALSA (I have the latest drivers installed) and LIRCD support. After booting up the system, I can see KDE on both my monitor and the TV. When I run Myth on my monitor everything runs fine. I can pause live tv, set recordings, record, playback, etc. with no problems. However, when I run Myth on the TV, everything works fine, except that live tv and recording playback drop frames and no sound can be heard. Here is what mythfrontend reports back to me:

    generating cache image for: /usr/share/mythtv/themes/default/blank.png 
    connecting to backend server: 127.0.0.1:6543 
    Opening OSS audio device '/dev/dsp'. 
    Over/underscanning. V: 0.000000, H: 0.000000, XOff: 0, YOff: 0 
    *** 
    * Couldn't find Xv support, falling back to non-Xv mode. 
    * MythTV performance will be much slower since color 
    * conversion and scaling will be done in software. 
    * Consider upgrading your video card or X server if 
    * you would like better performance. 
    Changing from None to WatchingLiveTV 
    *** 
    * Your system is not capable of displaying the 
    * full framerate at 720x480 resolution.  Frames 
    * will be skipped in order to keep the audio and 
    * video in sync. 
    Changing from WatchingLiveTV to None 
    Changing from None to None 

  Shouldn't the PVR 350 be shouldering the bulk of the video processing? I've heard other's say that all works great for them with respect to PVR 350 TV-Out.

  I apologize if I am a bit long-winded, but I wanted to give you as much info as possible to work with. Once again, I am pretty much a newbee when it comes to all of this, so please keep that in mind when responding.

  Thanks, 
  Jim Sager 



------------------------------------------------------------------------------


  _______________________________________________
  mythtv-users mailing list
  mythtv-users at mythtv.org
  http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20031024/c72fecaa/attachment.htm