[mythtv-users] Capture and LIRC problems

[Gennady Yakubovich]

Hi List.

I have PVR250 card installed on PC, running RH9

I have installed everything, as written in really great manual
http://pvrhw.goldfish.org/tiki-page.php?pageName=rh9pvr250

Kernel, modules and MythTV where installed without any problems,
HOWEVER.

 

1.	When I am trying to capture from, SVCD input, I have black
screen with colored horizontal-down-inclined lines, like out-of-sync
picture
2.	LIRC does not working irw produce no output.

 

Below is output from my dmesg and lspci and seems it is OK. What is my
problem? Are there any troubleshooting steps?

 

ip_tables: (C) 2000-2002 Netfilter core team

Linux video capture interface: v1.00

i2c-core.o: i2c core module version 2.8.0 (20030714)

ivtv: SGarray_size = 200, DSGarray_size = 16

ivtv: Found an iTVC16 based chip

PCI: Found IRQ 11 for device 02:0a.0

tuner: probing ivtv i2c driver #0 i2c adapter [id=0x10005]

tuner: chip found @ 0xc2

tuner(bttv): type forced to 2 (Philips NTSC (FI1236,FM1236 and
compatibles)) [in

smod]

saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005)

saa7114.c: detecting saa7114 client on address 0x42

saa7115.c: writing init values

status: (1E) 0x50, (1F) 0xc0

msp34xx: init: chip=MSP3435G-B6, has NICAM support

msp3410: daemon started

ivtv: Encoder revision: 0x02040008

ivtv: Registered v4l2 device, minor 0

ivtv: Registered v4l2 device, minor 32

ivtv: Registered v4l2 device, minor 224

lirc_dev: IR Remote Control driver registered, at major 61

bttv: driver version 0.7.104 loaded

bttv: using 4 buffers with 2080k (8320k total) for capture

bttv: Host bridge is Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge

lirc_i2c: chip found @ 0x18 (Hauppauge IR)

lirc_dev: lirc_register_plugin:sample_rate: 10

Intel 810 + AC97 Audio, version 0.24, 00:17:19 Sep  7 2003

PCI: Found IRQ 10 for device 00:1f.5

PCI: Sharing IRQ 10 with 00:1f.3

PCI: Setting latency timer of device 00:1f.5 to 64

i810: Intel ICH2 found at IO 0xd800 and 0xdc00, MEM 0x0000 and 0x0000,
IRQ 10

i810_audio: Audio Controller supports 6 channels.

i810_audio: Defaulting to base 2 channel mode.

i810_audio: Resetting connection 0

ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)

i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not
present), t

otal channels = 2

 

 

02:0a.0 Multimedia video controller: Internext Compression Inc: Unknown
device 0

016 (rev 01)

        Subsystem: Hauppauge computer works Inc.: Unknown device 4009

        Flags: bus master, medium devsel, latency 32, IRQ 11

        Memory at d8000000 (32-bit, prefetchable) [size=64M]

        Capabilities: <available only to root>

 

 

 

Thanks in advance.

 

Gennady Yakubovich

Software Engineer

 

CISCO SYSTEMS

32 HaMelacha st.,

P.O.Box 8735 I.Z. Sapir

S.Netanya 42504 Israel

 

Phone: +972-9-8927349

Fax  : +972-9-8857804