[mythtv-users] Help With Leadtek 2000..No picture

[mythtv at bruce.homelinux.com]

Hi,

I am using Leadtek 2000 card and am having issues getting a picture.
I recompiled my kernel with .tuner_type changed form 5 to 2 and the card now loads in NTSC
format. However, I still cant see a picture...only a blue screen.

here is what is in my kernel log when I load modprobe bttv.

i2c-core.o: client [Philips NTSC (FI1236,FM1236 and] unregistered.
i2c-core.o: adapter unregistered: bt848 #0
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:09.0, irq: 11, latency: 32, mmio: 0xef002000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:660
6
bttv0: using: BT878(Leadtek WinFast 2000/ W) [card=34,autodetected]
tuner: chip found @ 0xc2
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0

. 

What do I need to do to see the picture. Before I re-compiled I could hear the tv station, but couldnt see it. Now I cant see it nor hear it(other than shhhhhhhh sound).

Do I need to fine tune? If so How do i do that? Can soemone provide an example?

I have spent days trying to get this to work, but now avail.  thanks.