[mythtv-users] LIRC homebrew receiver problum on COM2??

[Zagaroth]

Thanx for the tip. I will try that...
I thought it was weird as it seemed to me way over sampling to me.

----- Original Message ----- 
From: "Jim Paris" <jim at jtan.com>
To: "Discussion about mythtv" <mythtv-users at mythtv.org>
Sent: Thursday, November 13, 2003 9:39 PM
Subject: Re: [mythtv-users] LIRC homebrew receiver problum on COM2??


> > After finishing the soldering of my homebrew lirc receiver i hooked
> > it up to my minimyth'ed VIA EPIA M10000 i have a problum i think and
> > i wanted some idea as to if its a software or my soldering thats at
> > fault. Anyway its set up on the internel com2 header using DIN12,
> > DOUT12 and GND pins. And its soldered the same way as the LIRC
> > website says. But when i run mode2 and press a button on the remote
> > i get and output like below. Its never the same each time. Any
> > ideas?
>
> There's nothing wrong with that.  Run irrecord and record a config
> file.  See http://www.lirc.org/html/
>
> -jim
>


----------------------------------------------------------------------------
----


_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users