[mythtv-users] Re: The definitive btaudio thread
Unit3
unit3 at demoni.ca
Tue Mar 25 23:07:47 UTC 2003
Robert Kulagowski wrote:
> If you have btaudio _working_ and actually use it to capture with
> MythTV, please post the output of "dmesg |grep bttv" and your
> modules.conf.
Alright, I fixed my /dev/dsp mixup. I needed to have the alsa oss
modules loading before btaudio. So simple! :P
Anyway, I've got an ATI TV Wonder (non VE!) and here's stuff:
First, /etc/modules.conf:
### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update.
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
# Support for i2c and lm_sensors
alias char-major-89 i2c-dev
### modules-update: end processing /etc/modules.d/aliases
### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header:
/home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf-rc,v
1.1 2002/12/21 06:31:52 agenkin Exp $
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
alias snd-card-0 snd-emu10k1
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
options snd cards_limit=1
### modules-update: end processing /etc/modules.d/alsa
### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### modules-update: end processing /etc/modules.d/i386
--
and my dmesg:
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
bttv: Host bridge is VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0d.0, irq: 10, latency: 32, mmio: 0xdf000000
bttv0: detected: ATI TV Wonder [card=63], PCI subsystem ID is 1002:0001
bttv0: using: BT878(ATI TV-Wonder) [card=63,autodetected]
bttv0: using tuner=17
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c attach [client=MSP3445G-B8,ok]
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c attach [client=Philips NTSC_M (MK2),ok]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
btaudio: driver version 0.7 loaded [digital+analog]
btaudio: Bt878 (rev 17) at 00:0d.1, irq: 10, latency: 32, mmio: 0xdf001000
btaudio: using card config "default"
btaudio: registered device dsp1 [digital]
btaudio: registered device dsp2 [analog]
btaudio: registered device mixer1
--
and for good measure, it'd be important to note that I needed to load
the bttv module like so:
bttv tuner=17
Autodetection didn't work too well. :)
Graeme
More information about the mythtv-users
mailing list