[mythtv-users] HW configuration sanity check

[Robert Kulagowski]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> 256 MB PC2100 RAM: $23 (pricewatch.com)

Kingston PC2100 256MB free after rebate at OfficeMax.

> Prolink Play TV Pro FM RC TV Tuner 64MB Model
> TV-BT878P+FM/RC: $43 (newegg.com)

> Any other gotcha's that I'm overlooking?  Will the
> Prolink card fit in the not quite full height PCI
> slots in the Pundit?

If you look at the second photo on the Newegg page.  See how the top
of the PC board is taller than the bracket?  That means you're only
going to be able to fit the card into one of the two slots, and you
may need to move a cable clip out of the way.  (It's one of those
that has a sticky pad and a little hook on it.  I didn't have too
much trouble moving it out of the way.

The height of the card also means that you're going to need to bend
the case slightly when you're reinserting, and that when the PCI
extender/card carrier is put back in the case is going to be
_pushing_ on the top of that PCI card so that the card is being
pushed into the PCI bus slot.  Essentialy, in a vertical
configuration the cards end up upside down.

If I can fit a PVR-250 into my Pundit, I'm sure you can fit the
Prolink.

Actually, once the CX2388? driver is better (if it's not already),
the Prolink Play TV PVR FM+TV Tuner/Video Capture Card Model
TV-CX883P+ Retail is going to fit _a lot_ better, since the card is
barely bigger than the tuner.

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>

iQA/AwUBPujchPc1NpCTlP0JEQJN5gCgmjctZ7XYKQzYihmh+XqvRursP5AAoJ1g
kQVuZvVkYFUVsRhx4zJKy4pu
=eWew
-----END PGP SIGNATURE-----