[mythtv-users] nuv -> svcd... FINALLY!
Alan Snyder
ax763 at yahoo.com
Sun Aug 31 16:30:13 EDT 2003
Still having trouble, even after installing transcode. Script output is below.
One thought - I haven't bothered marking commercials; could there be a problem when there is no cutlist? While mp2enc is running, the frame count zips along but note
frame= 3 q=0.0 size= 1013kB time=0.1 bitrate=82865.9kbits/s
---------------------------
Choose a function: 1
Where would you like to export the files to? [./]
Output filename [The Implant].mpg? The_Implant
No cutlist found. Hopefully this means that you already removed the commercials.
Audio bitrate? [192]
Maximum video bitrate for VBR? [2500]
VBR quality/quantisation (2-31)? [5]
Enable noise reduction (slower, but better results)? [Yes]
2003-08-31 17:53:03 Transcoding from /var/video/1004_20030830190000_20030830193000.nuv to /var/video/1004_20030830190000_20030830193000.nuv.tmp
2003-08-31 17:53:03 Enforcing sync on fifos
2003-08-31 17:53:03 Created video fifo: fifodir/vidout
2003-08-31 17:53:03 Created audio fifo: fifodir/audout
2003-08-31 17:53:03 Video 480x480 at 29.97fps Audio rate: 32000
2003-08-31 17:53:03 Created fifos. Waiting for connection.
2003-08-31 17:53:03 Audio is 53ms ahead of video at # 1
Waiting for mythtranscode to set up the fifos.
No header found. Assuming Raw PCM sound file
--------------------------------------------
Input File : 'fifodir/audout' 32.0 kHz
Output File: '1004_20030830190000_20030830193000.mp2'
192 kbps MPEG-1 Layer II j-stereo Psy model 1
[De-emph:Off Copyright:No Original:No CRC:Off]
[Padding:Normal Byte-swap:Off Chanswap:Off DAB:Off]
ATH adjustment 0.000000
--------------------------------------------
encode_init: using tablenum 1 with sblimit 30
INFO: [yuvdenoise] ========================================================
INFO: [yuvdenoise] Y4M2 Motion-Compensating-YCrCb-Denoiser
INFO: [yuvdenoise] ========================================================
INFO: [yuvdenoise] Version: MjpegTools 1.6.1
INFO: [yuvscaler] yuvscaler (version 1.6.1) is a general scaling utility for yuv frames
INFO: [yuvscaler] (C) 2001 Xavier Biquard <xbiquard at free.fr>
INFO: [yuvscaler] yuvscaler -h for help, or man yuvscaler
Input #0, rawvideo, from 'fifodir/vidout':
Duration: N/A, bitrate: N/A
Stream #0.0: Video: rawvideo, yuv420p, 480x480, 29.97 fps
Output #0, yuv4mpegpipe, to 'pipe:':
Stream #0.0: Video: rawvideo, yuv420p, 480x480, 29.97 fps, q=2-31, 200 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
INFO: [yuvdenoise]
INFO: [yuvdenoise] Denoiser - Settings:
INFO: [yuvdenoise] --------------------
INFO: [yuvdenoise]
INFO: [yuvdenoise] Mode : Progressive frames
INFO: [yuvdenoise] Deinterlacer : Off
INFO: [yuvdenoise] Postprocessing : On
INFO: [yuvdenoise] Frame border : x: 0 y: 0 w:480 h:480
INFO: [yuvdenoise] Search radius : 16
INFO: [yuvdenoise] Filter delay : 3
INFO: [yuvdenoise] Filter threshold : 5
INFO: [yuvdenoise] Pass 2 threshold : 4
INFO: [yuvdenoise] Y - contrast : 100 %
INFO: [yuvdenoise] Cr/Cb - contrast : 100 %
INFO: [yuvdenoise] Sharpen : 125 %
INFO: [yuvdenoise]
INFO: [yuvdenoise] Sorry, no SIMD optimisations available.
2003-08-31 17:53:04 Audio is 44ms ahead of video at # 4
INFO: [mpeg2enc] Selecting SVCD output profile
++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by "vcdimager"
++ WARN: [mpeg2enc] If you're not using vcdimager you may wish to turn this off using -d
INFO: [mpeg2enc] Encoding MPEG-2 video to 1004_20030830190000_20030830193000.m2v
INFO: [mpeg2enc] Horizontal size: 480 pel
INFO: [mpeg2enc] Vertical size: 480 pel
INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc] Frame rate code: 4 = 30000.0/1001.0 (NTSC VIDEO)
INFO: [mpeg2enc] Bitrate: 2500 KBit/s
INFO: [mpeg2enc] Quality factor: 5 (1=best, 31=worst)
INFO: [mpeg2enc] Field order for input: none/progressive
INFO: [mpeg2enc] New Sequence every 795 Mbytes
INFO: [mpeg2enc] Assuming non-video stream of 192 Kbps
INFO: [mpeg2enc] Search radius: 24
INFO: [mpeg2enc] GOP SIZE RANGE 9 TO 15
INFO: [mpeg2enc] Setting colour/gamma parameters to "unspecified"
INFO: [mpeg2enc] Progressive format frames = 1
INFO: [mpeg2enc] Buffering 39 frames
2003-08-31 17:54:30 Audio is 61ms ahead of video at # 7806kbits/s
2003-08-31 17:54:42 Audio is 43ms ahead of video at # 8855kbits/s
2003-08-31 17:56:35 Audio is 36ms ahead of video at # 19347bits/s
2003-08-31 17:57:01 Audio is 36ms behind video at # 216729kbits/s
2003-08-31 17:59:36 Audio is 34ms behind video at # 360269kbits/s
2003-08-31 18:01:40 Audio is 34ms ahead of video at # 47458bits/s
2003-08-31 18:02:32 Audio is 34ms behind video at # 522539kbits/s
frame= 3 q=0.0 size= 1013kB time=0.1 bitrate=82865.9kbits/s
Hit end of audio data
Avg slots/frame = 864.000; b/smp = 6.00; bitrate = 192.000 kbps
Done
2003-08-31 18:02:50 Transcoding /var/video/1004_20030830190000_20030830193000.nuv done
INFO: [mpeg2enc] GOP LENGTH = 3
INFO: [mpeg2enc] Frame start 0 I 0 0
INFO: using reference profile (SVCD)
INFO: profile type is (PAL)
ERROR: Unable to read from file 1004_20030830190000_20030830193000.m2v.
Thanks for using myth_export!
[alan at localhost MythTV]$ INFO: [mpeg2enc] Frame end 0 173.64 173.64 15.0 15.03
INFO: [mpeg2enc] Frame start 1 P 2 2
INFO: [mpeg2enc] Frame end 1 65.68 239.32 8.7 23.73
INFO: [mpeg2enc] Frame start 2 B 1 1
INFO: [mpeg2enc] Frame end 2 44.03 283.35 8.8 32.53
INFO: [mpeg2enc] GOP LENGTH = 0
Chris Petersen <lists at forevermore.net> wrote:
ok, I just (hopefully) fixed the mp2enc stuff. Please let me know if it
works properly.
-Chris
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20030831/7b2313bb/attachment.htm
More information about the mythtv-users
mailing list