[mythtv] *buntu trusty ppa: loss of multirec
Stuart Auchterlonie
stuarta at squashedfrog.net
Wed Jan 27 14:14:02 UTC 2016
On 27/01/16 13:03, John Pilkington wrote:
> On 26/01/16 12:32, John Pilkington wrote:
>> I hope this isn't another case of finger trouble, but...
>>
>> This is a test box, not in regular production. It has a single
>> PCTV-290e DVB-T/DVB-T2 USB tuner which is recognised by the kernel.
>>
>> A recording I made on Saturday had an unexpected chanid, 18664 instead
>> of 1104, and I noticed a 'rescan your transports' notice, so I did. I
>> have run the recent ppa builds of 87e72, a11db and currently 81f09.
>>
>> Since a11db, attempts to schedule simultaneous recordings on the same
>> mux have 'conflicted'. Since I use pre/post roll this also applies to
>> sequential recordings. I was able to capture the content of the second
>> programme by extending the first recording.
>>
>> It's probably some time since earlier schedules required multirec, but
>> it used to work.
>>
>> Since the DVB-T/DVB-T2 explicit switching was introduced (#12342),
>> mythtv-setup.real no longer displays the adapter name, but appears to
>> accept other related inputs, and a new channel scan looks good. I
>> usually allow 5 multirecs.
>>
>> I have tried 'mythbackend --setverbose none,schedule' but see nothing
>> obviously wrong when attempting to set a 'conflicting' recording from
>> the EIT-based guide.
>>
>> Any more suggestions welcome.
>>
>> John P
> ---------------
> dmesg extracts:
>
> 20.393316] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps
> (2013:024f, interface 0, class 0)
> [ 20.393321] em28xx: DVB interface 0 found: isoc
> [ 20.393508] em28xx: chip ID is em28174
>
> 20.749006] em28174 #0: Identified as PCTV nanoStick T2 290e (card=78)
> [ 20.749019] em28174 #0: v4l2 driver version 0.2.0
> [ 20.754215] em28174 #0: V4L2 video device registered as video0
> [ 20.754218] em28174 #0: dvb set to isoc mode.
> [ 20.754637] usbcore: registered new interface driver em28xx
>
> 21.834753] tda18271 7-0060: creating new instance
> [ 21.839610] TDA18271HD/C2 detected @ 7-0060
> [ 22.083870] DVB: registering new adapter (em28174 #0)
> [ 22.083885] usb 2-1: DVB: registering adapter 0 frontend 0 (Sony
> CXD2820R)...
> [ 22.084835] em28174 #0: Successfully loaded em28xx-dvb
> [ 22.084841] Em28xx: Initialized (Em28xx dvb Extension) extension
>
> 397.081170] tda18271: performing RF tracking filter calibration
> [ 400.155363] tda18271: RF tracking filter calibration complete
>
> --------------
> mythtv-setup.real -v most (when probing; the /dev string appears in the
> box but no device is identified below it)
>
> 2016-01-27 12:39:20.849960 I V4L2(/dev/dvb/adapter0/frontend0): Closed
> 2016-01-27 12:39:20.850002 A
> TriggeredConfigurationGroup::triggerChanged(Failed to probe)
> Error:Failed to locate value in triggerMap
> 2016-01-27 12:39:20.869096 I V4L2(/dev/dvb/adapter0/frontend0): Closed
> 2016-01-27 12:39:20.889085 I V4L2(/dev/dvb/adapter0/frontend0): Closed
> 2016-01-27 12:39:20.889119 A
> TriggeredConfigurationGroup::triggerChanged(Failed to probe)
> Error:Failed to locate value in triggerMap
> 2016-01-27 12:39:20.909837 I V4L2(/dev/dvb/adapter0/frontend0): Closed
>
> --------------
> 2016-01-27 12:57:44.425939 C mythtv-setup version: master
> [v0.28-pre-3497-g7963251] www.mythtv.org
> 2016-01-27 12:57:44.425950 C Qt version: compile: 5.2.1, runtime: 5.2.1
>
>
Time for the silly questions. did you go into the recording options and
set multirec to > 1 ??
Regards
Stuart
More information about the mythtv-dev
mailing list