[mythtv] Mythbackend exits during initialization with arbitrary return code. No crash.

[Mark Buechler]

I'm sure it's all my setup at this point. I've not spent any time debugging
IPTV beyond figuring out that it was my problem.

Thanks, Mark.

On 12/3/06, Daniel Kristjansson <danielk at cuymedia.net> wrote:
>
> On Sun, 2006-12-03 at 15:15 -0500, Mark Buechler wrote:
> > Ok, my problem was that card type 'CRC_IP' no longer exists. So, I
> > changed that to "Network Recorder" and the card type went tp
> > 'FREEBOX'. Apparently just changing that doesn't fix the issue for me
> > since the backend goes as far as initializing the network recorder and
> > doesn't initialize any other capturecards on that same backend. In
> > other words, my backend log looks like this:
> >
> > 2006-12-03 15:07:45.999 Using runtime prefix = /opt/mns/mythtv.12173
> > 2006-12-03 15:07:46.074 New DB connection, total: 1
> > 2006-12-03 15:07:46.089 Connected to database 'mythconverg' at host:
> > pc4
> > 2006-12-03 15:07: 46.096 Current Schema Version: 1171
> > Running as a slave backend.
> > 2006-12-03 15:07:46.107 New DB connection, total: 2
> > 2006-12-03 15:07:46.110 Connected to database 'mythconverg' at host:
> > pc4
> > 2006-12-03 15:07:46.111 mythbackend: MythBackend started as a slave
> > backend
> > 2006-12-03 15:07:46.116 EITHelper: localtime offset -5:00:00
> > 2006-12-03 15:07:46.123 IPTVChan(1): ctor
> > 2006-12-03 15:07:46.124 IPTVChan(1): Open() -- begin
> > 2006-12-03 15:07:46.124 IPTVChan(1): Open() -- locked
> > 2006-12-03 15:07:46.126 New DB connection, total: 3
> > 2006-12-03 15:07:46.129 Connected to database 'mythconverg' at host:
> > pc4
> > 2006-12-03 15:07:46.133 ChannelBase(1): Input #1000: 'MPEG2TS'
> > schan(0) sourceid(1000) ccid(1)
> > 2006-12-03 15:07:46.133 ChannelBase(1): Current Input #1000: 'MPEG2TS'
> > 2006-12-03 15:07:56.122 mythbackend: Running housekeeping thread
> >
> > Now, I have two DVB cards and a PVR card on this backend as well by
> > the backend never gets that far when I have the network recorder
> > configured.
>
> Did you create a M3U file with your channels and point to it in
> your config of the recorder in mythtv-setup.
>
> I still have a patch from Mickael to apply, but I don't think that
> will address your problem. I plan to write up a description of how
> to use the new IP recorder before 0.21 is released, but I haven't
> gotten around to it yet. But there are a couple README's in
> libs/libmythtv/iptv, the important thing is that the UDP URL
> format has changed, have a look at "README.UDP".
>
> -- Daniel
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-dev/attachments/20061203/18e8407d/attachment.htm