[mythtv] dvb-t tuning fails on one channel after the big livetv update

Gernot Pansy pansyg at gmx.at
Mon Nov 21 18:43:17 EST 2005


i have updated to last svn version and now i'm unable to tune to one channel 
(ORF1). all other channels are working.

i get these output in my backend log:

2005-11-22 00:28:24.577 DVB#0 Opening DVB channel
2005-11-22 00:28:24.581 DVB#0 SetChannelByString(1)
2005-11-22 00:28:24.592 DVB#0 Frequency: 802000000 BW: 8MHz HP: 3/4 LP: 3/4C: 
QAM-16 TM: 8K H: None GI: 1/8
2005-11-22 00:28:24.598 DVB#0 Old Params: freq(802000000) type(OFDM)
2005-11-22 00:28:24.607 DVB#0 New Params: freq(802000000) type(OFDM)
2005-11-22 00:28:24.610 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2005-11-22 00:28:24.615 DVB#0 Tuned to frequency for channel 1.
2005-11-22 00:28:24.665 Preview Error: Run() file not local: 
'myth://172.16.0.3:6543/1002_20051122002809.mpg'
2005-11-22 00:28:24.758 DVB#0 Opening DVB channel
2005-11-22 00:28:24.812 SM(0)::AddFlags: Seen() Match() Wait(Sig,SNR,BER,UB,)
2005-11-22 00:28:24.822 DVBSM(0)::constructor(): initial flags 0x7400000
2005-11-22 00:28:24.831 DTVSM(0)::SetProgramNumber(10801):
2005-11-22 00:28:24.838 SM(0)::RemoveFlags: Seen(PMT,) Match(PMT,) Wait()
2005-11-22 00:28:24.846 SM(0)::AddFlags: Seen() Match() Wait(PMT,)
2005-11-22 00:28:24.855 SM(0)::AddFlags: Seen() Match() Wait(PAT,PMT,)
2005-11-22 00:28:24.863 SM(0)::Start: begin
2005-11-22 00:28:24.872 SM(0)::Start: end
2005-11-22 00:28:24.956 DVBSM(0)::UpdateValues: Signal Locked
2005-11-22 00:28:25.205 DVBSM(0)::UpdateValues: Waiting for table monitor to 
start
2005-11-22 00:28:25.205 DVBSM(0): RunTableMonitorSR(): begin (# of pids 2)
2005-11-22 00:28:25.387 DVBSM(0)::AddPIDFilter(0x0):
2005-11-22 00:28:25.402 DVBSM(0)::AddPIDFilter(0x1ffb):
2005-11-22 00:28:25.386 DVBSM(0)::UpdateValues: Table monitor started
2005-11-22 00:28:25.562 SM(0)::AddFlags: Seen(PAT,) Match() Wait()
2005-11-22 00:28:26.009 DTVSM(0)::GetStatusList: WaitForPMT seen(0) 
matching(0)
2005-11-22 00:28:26.123 SM(0)::AddFlags: Seen() Match(PAT,) Wait()
2005-11-22 00:28:26.186 DVBSM(0)::AddPIDFilter(0x321):
2005-11-22 00:28:26.305 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.367 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.460 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.528 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.615 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.708 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.771 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.862 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:26.927 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:27.018 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
2005-11-22 00:28:27.111 DVBSM(0): RunTableMonitorSR(): unhandled data (# 
bytes: 188)
.
.
.
.


what means this ? 

2005-11-22 00:28:24.665 Preview Error: Run() file not local: 
'myth://172.16.0.3:6543/1002_20051122002809.mpg'

i get it on every channel change ...

--
gernot


More information about the mythtv-dev mailing list