[mythtv] Crashes
Tom Barber
tom at wamonline.org.uk
Thu Mar 17 05:06:29 UTC 2005
Mario L wrote:
>I had the same problems too, until I moved my pvr350 into a dedicated
>backend. Even if I was using tvout of another video card and not the
>350 tv out it would freeze. The moment I had a dedicated backend and
>dedicated frontend the issues went away.
>
>
>On Wed, 16 Mar 2005 19:51:39 +0000, Tom Barber <tom at wamonline.org.uk> wrote:
>
>
>>Robert Kulagowski wrote:
>>
>>
>>
>>>>Anyone else had this problem?
>>>>
>>>>
>>>No one can do anything with a post that has no details in it.
>>>_______________________________________________
>>>mythtv-dev mailing list
>>>mythtv-dev at mythtv.org
>>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>
>>>
>>>
>>Right,
>>I have a Semperon 2.8,
>>512MB RAM
>>a 40GB IDE HD
>>Nvidia Geforce FX 128MB running the 7167 Nvidia driver
>>and 2 PVR 250's
>>running FC3
>>IVTV 0.2.0
>>Myth TV 0.17
>>
>>It runs fine apart from it crashes solid often when rewinding pausing or
>>ffowarding live tv.
>>Also now and again it just freezes solid often with a high pitched
>>sqeeking coming through the speakers, it seems to happen more often when
>>recording tv, only crashes when watching TV as well. It doesn't just
>>crash the frontend I can't even ssh into the box.
>>I've checked the DMA settings and its on.
>>I've switched off acpi and apm.
>>
>>I'm not running out of harddrive space the /video partition.
>>
>>Filesystem Size Used Avail Use% Mounted on
>>/dev/hda2 9.7G 2.6G 6.7G 28% /
>>/dev/hda1 99M 14M 81M 15% /boot
>>none 252M 0 252M 0% /dev/shm
>>/dev/hda5 27G 3.9G 24G 15% /video
>>
>>so im at a bit of a loss.
>>I've included my xorg.conf and my latest dmesg and the ivtvinit section.
>>Thanks again
>>Tom
>>
>>
>># XFree86 4 configuration created by pyxf86config
>>
>>Section "ServerLayout"
>> Identifier "Default Layout"
>> Screen 0 "Screen0" 0 0
>> InputDevice "Mouse0" "CorePointer"
>> InputDevice "Keyboard0" "CoreKeyboard"
>>EndSection
>>
>>Section "Files"
>>
>># RgbPath is the location of the RGB database. Note, this is the name of the
>># file minus the extension (like ".txt" or ".db"). There is normally
>># no need to change the default.
>># Multiple FontPath entries are allowed (they are concatenated together)
>># By default, Red Hat 6.0 and later now use a font server independent of
>># the X server to render fonts.
>> RgbPath "/usr/X11R6/lib/X11/rgb"
>> ModulePath "/usr/X11R6/lib/modules/extensions/nvidia"
>> ModulePath "/usr/X11R6/lib/modules/extensions"
>> ModulePath "/usr/X11R6/lib/modules"
>> FontPath "unix/:7100"
>>EndSection
>>
>>Section "Module"
>> Load "dbe"
>> Load "extmod"
>> Load "v4l"
>> Load "fbdevhw"
>> Load "glx"
>> Load "record"
>> Load "freetype"
>> Load "type1"
>>EndSection
>>
>>Section "InputDevice"
>>
>># Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>># Option "Xleds" "1 2 3"
>># To disable the XKEYBOARD extension, uncomment XkbDisable.
>># Option "XkbDisable"
>># To customise the XKB settings to suit your keyboard, modify the
>># lines below (which are the defaults). For example, for a non-U.S.
>># keyboard, you will probably want to use:
>># Option "XkbModel" "pc102"
>># If you have a US Microsoft Natural keyboard, you can use:
>># Option "XkbModel" "microsoft"
>>#
>># Then to change the language, change the Layout setting.
>># For example, a german layout can be obtained with:
>># Option "XkbLayout" "de"
>># or:
>># Option "XkbLayout" "de"
>># Option "XkbVariant" "nodeadkeys"
>>#
>># If you'd like to switch the positions of your capslock and
>># control keys, use:
>># Option "XkbOptions" "ctrl:swapcaps"
>># Or if you just want both to be control, use:
>># Option "XkbOptions" "ctrl:nocaps"
>>#
>> Identifier "Keyboard0"
>> Driver "kbd"
>> Option "XkbModel" "pc105"
>> Option "XkbLayout" "gb"
>>EndSection
>>
>>Section "InputDevice"
>> Identifier "Mouse0"
>> Driver "mouse"
>> Option "Protocol" "microsoft"
>> Option "Device" "/dev/ttyS0"
>># Option "ZAxisMapping" "4 5"
>> Option "Emulate3Buttons" "yes"
>>EndSection
>>
>>Section "Monitor"
>> Identifier "Monitor0"
>> VendorName "Monitor Vendor"
>> ModelName "719B"
>># DisplaySize 330 250
>> HorizSync 30.0 - 50.0
>> VertRefresh 60.0
>># Option "dpms"
>>EndSection
>>
>>Section "Device"
>> Identifier "Videocard0"
>> Driver "nvidia"
>> VendorName "Videocard vendor"
>> BoardName "NVIDIA GeForce FX (generic)"
>> Option "RenderAccel" "1"
>> Option "ConnectedMonitor" "TV"
>> Option "TVStandard" "PAL-I"
>> Option "TVOutFormat" "COMPOSITE"
>># Option "TwinView"
>># Option "SecondMonitorHorizSync" "30-50"
>># Option "SecondMonitorVertRefresh" "60"
>># Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480,
>>640x480;"
>># Option "TVStandard" "PAL-I"
>>EndSection
>>
>>Section "Screen"
>> Identifier "Screen0"
>> Device "Videocard0"
>> Monitor "Monitor0"
>> DefaultDepth 24
>> SubSection "Display"
>> Viewport 0 0
>> Depth 16
>> Modes "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 24
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>>EndSection
>>
>>Section "DRI"
>> Group 0
>> Mode 0666
>>EndSection
>>
>>
>>HighMem zone: 0 pages, LIFO batch:1
>>DMI 2.3 present.
>>Built 1 zonelists
>>Kernel command line: ro root=LABEL=/ rhgb quiet acpi=off apic=off apic=no apm=off pci=routeirq
>>Initializing CPU#0
>>CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
>>PID hash table entries: 2048 (order: 11, 32768 bytes)
>>Detected 1666.562 MHz processor.
>>Using tsc for high-res timesource
>>Console: colour VGA+ 80x25
>>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>>Memory: 514876k/524224k available (2045k kernel code, 8752k reserved, 655k data, 160k init, 0k highmem)
>>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>>Calibrating delay loop... 3268.60 BogoMIPS (lpj=1634304)
>>Security Framework v1.0.0 initialized
>>SELinux: Initializing.
>>SELinux: Starting in permissive mode
>>selinux_register_security: Registering secondary module capability
>>Capability LSM initialized as secondary
>>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
>>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
>>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>CPU: L2 Cache: 256K (64 bytes/line)
>>CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000020
>>Intel machine check architecture supported.
>>Intel machine check reporting enabled on CPU#0.
>>CPU: AMD Sempron(tm) 2400+ stepping 01
>>Enabling fast FPU save and restore... done.
>>Enabling unmasked SIMD FPU exception support... done.
>>Checking 'hlt' instruction... OK.
>>checking if image is initramfs... it is
>>Freeing initrd memory: 568k freed
>>NET: Registered protocol family 16
>>PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
>>PCI: Using configuration type 1
>>mtrr: v2.0 (20020519)
>>ACPI: Subsystem revision 20041105
>>ACPI: Interpreter disabled.
>>Linux Plug and Play Support v0.97 (c) Adam Belay
>>pnp: PnP ACPI: ACPI disable
>>usbcore: registered new driver usbfs
>>usbcore: registered new driver hub
>>PCI: Probing PCI hardware
>>PCI: Probing PCI hardware (bus 00)
>>PCI: Via IRQ fixup
>>PCI: Using IRQ router default [1106/3177] at 0000:00:11.0
>>PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask
>>PCI: Hardcoded IRQ 14 for device 0000:00:11.1
>>apm: BIOS not found.
>>audit: initializing netlink socket (disabled)
>>audit(1111001002.690:0): initialized
>>Total HugeTLB memory allocated, 0
>>VFS: Disk quotas dquot_6.5.1
>>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>SELinux: Registering netfilter hooks
>>Initializing Cryptographic API
>>ksign: Installing public key data
>>Loading keyring
>>- Added public key C1F2FA57F7EECD64
>>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>isapnp: Scanning for PnP cards...
>>isapnp: No Plug & Play device found
>>Real Time Clock Driver v1.12
>>Linux agpgart interface v0.100 (c) Dave Jones
>>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>>agpgart: Maximum main memory to use for agp memory: 439M
>>agpgart: AGP aperture is 64M @ 0xe0000000
>>serio: i8042 AUX port at 0x60,0x64 irq 12
>>serio: i8042 KBD port at 0x60,0x64 irq 1
>>Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
>>io scheduler noop registered
>>io scheduler anticipatory registered
>>io scheduler deadline registered
>>io scheduler cfq registered
>>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>>divert: not allocating divert_blk for non-ethernet device lo
>>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>>PCI: Hardcoded IRQ 14 for device 0000:00:11.1
>>VP_IDE: chipset revision 6
>>VP_IDE: not 100% native mode: will probe irqs later
>>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>>Probing IDE interface ide0...
>>hda: SAMSUNG SP0411N, ATA DISK drive
>>elevator: using anticipatory as default io scheduler
>>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>Probing IDE interface ide1...
>>hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
>>ide1 at 0x170-0x177,0x376 on irq 15
>>hda: max request size: 1024KiB
>>hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(133)
>>hda: cache flushes supported
>> hda: hda1 hda2 hda3 hda4 < hda5 >
>>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
>>Uniform CD-ROM driver Revision: 3.20
>>ide-floppy driver 0.99.newide
>>usbcore: registered new driver hiddev
>>usbcore: registered new driver usbhid
>>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>>mice: PS/2 mouse device common for all mice
>>input: AT Translated Set 2 keyboard on isa0060/serio0
>>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>NET: Registered protocol family 2
>>IP: routing cache hash table of 1024 buckets, 32Kbytes
>>TCP: Hash tables configured (established 32768 bind 9362)
>>Initializing IPsec netlink socket
>>NET: Registered protocol family 1
>>NET: Registered protocol family 17
>>Freeing unused kernel memory: 160k freed
>>EXT3-fs: INFO: recovery required on readonly filesystem.
>>EXT3-fs: write access will be enabled during recovery.
>>kjournald starting. Commit interval 5 seconds
>>EXT3-fs: recovery complete.
>>EXT3-fs: mounted filesystem with ordered data mode.
>>SELinux: Disabled at runtime.
>>SELinux: Unregistering netfilter hooks
>>floppy0: no floppy controllers found
>>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>>divert: allocating divert_blk for eth0
>>eth0: VIA Rhine II at 0xdffffe00, 00:0b:6a:6f:11:47, IRQ 11.
>>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>>ip_tables: (C) 2000-2002 Netfilter core team
>>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>>Linux video capture interface: v1.00
>>ivtv: no version for "struct_module" found: kernel tainted.
>>ivtv: ==================== START INIT IVTV ====================
>>ivtv: version 0.2.0 (rc3g) loading
>>ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4
>>ivtv: In case of problems please include the debug info
>>ivtv: between the START INIT IVTV and END INIT IVTV lines when
>>ivtv: mailing the ivtv-devel mailinglist.
>>ivtv: Autodetected WinTV PVR 250 card
>>ivtv: Found an iTVC16 based chip
>>ivtv: Unreasonably low latency timer, setting to 64 (was 32)
>>ivtv: VIA PCI device: 0x3189 vendor: 0x1106
>>tveeprom: Hauppauge: model = 32035, rev = B135, serial# = 6916180
>>tveeprom: tuner = Temic 4066FY5 (idx = 35, type = 18)
>>tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
>>tveeprom: audio_processor = MSP3415 (type = 6)
>>ivtv: i2c attach [client=tveeprom[0],ok]
>>ivtv: Tuner Type 18, Tuner formats 0x00000010, Radio: yes, Model 0x008914d5, Revision 0x00000000
>>ivtv: PAL tuner detected
>>ivtv: Radio detected
>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>>ivtv: i2c attach [client=(tuner unset),ok]
>>saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>>saa7115: detecting saa7115 client on address 0x42
>>saa7115: writing init values
>>ivtv: i2c attach [client=saa7115[0],ok]
>>saa7115: status: (1E) 0x48, (1F) 0xc0
>>msp34xx: init: chip=MSP3415G-B8 +nicam +simple +simpler +radio mode=simple
>>ivtv: i2c attach [client=MSP3415G-B8,ok]
>>msp3410: daemon started
>>ivtv: Encoder revision: 0x02040024
>>ivtv: Encoder Firmware is buggy, use version 0x02040011
>>ivtv: Configuring WinTV PVR 250 card with 5 streams
>>ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
>>ivtv: Registered v4l2 device, streamtype 0 minor 0
>>ivtv: Create DMA stream 1
>>ivtv: Registered v4l2 device, streamtype 1 minor 32
>>ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 2 minor 224
>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 3 minor 24
>>ivtv: Create stream 4
>>ivtv: Registered v4l2 device, streamtype 4 minor 64
>>ivtv: Setting Tuner 18
>>tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #0
>>ivtv: Setting audio matrix to input 3, output 1
>>ivtv: Switching standard to PAL.
>>saa7115: decoder set norm PAL
>>saa7115: set audio: 0x01
>>ivtv: Initialized WinTV PVR 250, card #0
>>ivtv: Autodetected WinTV PVR 250 card
>>ivtv: Found an iTVC16 based chip
>>ivtv: Unreasonably low latency timer, setting to 64 (was 32)
>>ivtv: VIA PCI device: 0x3189 vendor: 0x1106
>>tveeprom: Hauppauge: model = 32035, rev = B135, serial# = 6916325
>>tveeprom: tuner = Temic 4066FY5 (idx = 35, type = 18)
>>tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
>>tveeprom: audio_processor = MSP3415 (type = 6)
>>ivtv: i2c attach [client=tveeprom[1],ok]
>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
>>ivtv: i2c attach [client=(tuner unset),ok]
>>saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
>>saa7115: detecting saa7115 client on address 0x42
>>saa7115: writing init values
>>ivtv: i2c attach [client=saa7115[1],ok]
>>ivtv: ivtv_enc_thread: pid = 2460, itv = 0xe0a05020
>>saa7115: status: (1E) 0x48, (1F) 0xc0
>>msp34xx: init: chip=MSP3415G-B8 +nicam +simple +simpler +radio mode=simple
>>ivtv: i2c attach [client=MSP3415G-B8,ok]
>>msp3410: daemon started
>>ivtv: Tuner Type 18, Tuner formats 0x00000010, Radio: yes, Model 0x008914d5, Revision 0x00000000
>>ivtv: PAL tuner detected
>>ivtv: Radio detected
>>ivtv: Encoder revision: 0x02040024
>>ivtv: Encoder Firmware is buggy, use version 0x02040011
>>ivtv: Configuring WinTV PVR 250 card with 5 streams
>>ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
>>ivtv: Registered v4l2 device, streamtype 0 minor 1
>>ivtv: Create DMA stream 1
>>ivtv: Registered v4l2 device, streamtype 1 minor 33
>>ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 2 minor 225
>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 3 minor 25
>>ivtv: Create stream 4
>>ivtv: Registered v4l2 device, streamtype 4 minor 65
>>ivtv: Setting Tuner 18
>>tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #1
>>ivtv: Setting audio matrix to input 3, output 1
>>ivtv: Switching standard to PAL.
>>saa7115: decoder set norm PAL
>>saa7115: set audio: 0x01
>>ivtv: Initialized WinTV PVR 250, card #1
>>ivtv: ==================== END INIT IVTV ====================
>>ivtv: ivtv_enc_thread: pid = 2553, itv = 0xe0a194c0
>>lirc_dev: IR Remote Control driver registered, at major 61
>>bttv: driver version 0.9.15 loaded
>>bttv: using 8 buffers with 2080k (520 pages) each for capture
>>lirc_i2c: chip found @ 0x18 (Hauppauge IR)
>>ivtv: i2c attach [client=Hauppauge IR,ok]
>>lirc_dev: lirc_register_plugin:sample_rate: 10
>>lirc_i2c: chip found @ 0x18 (Hauppauge IR)
>>ivtv: i2c attach [client=Hauppauge IR,ok]
>>lirc_dev: lirc_register_plugin:sample_rate: 10
>>saa7115: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0)
>>gameport: pci0000:00:0d.1 speed 1193 kHz
>>ehci_hcd 0000:00:10.3: EHCI Host Controller
>>ehci_hcd 0000:00:10.3: irq 12, pci mem 0xdfffff00
>>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>>ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
>>hub 1-0:1.0: USB hub found
>>hub 1-0:1.0: 6 ports detected
>>USB Universal Host Controller Interface driver v2.2
>>uhci_hcd 0000:00:10.0: UHCI Host Controller
>>uhci_hcd 0000:00:10.0: irq 11, io base 0xdc00
>>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>>hub 2-0:1.0: USB hub found
>>hub 2-0:1.0: 2 ports detected
>>uhci_hcd 0000:00:10.1: UHCI Host Controller
>>uhci_hcd 0000:00:10.1: irq 10, io base 0xe000
>>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>>hub 3-0:1.0: USB hub found
>>hub 3-0:1.0: 2 ports detected
>>uhci_hcd 0000:00:10.2: UHCI Host Controller
>>uhci_hcd 0000:00:10.2: irq 3, io base 0xe400
>>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>>hub 4-0:1.0: USB hub found
>>hub 4-0:1.0: 2 ports detected
>>md: Autodetecting RAID arrays.
>>md: autorun ...
>>md: ... autorun DONE.
>>NET: Registered protocol family 10
>>Disabled Privacy Extensions on device c03697c0(lo)
>>IPv6 over IPv4 tunneling driver
>>divert: not allocating divert_blk for non-ethernet device sit0
>>nvidia: module license 'NVIDIA' taints kernel.
>>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 09:08:22 PST 2005
>>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>>spurious 8259A interrupt: IRQ7.
>>eth0: no IPv6 routers present
>>EXT3 FS on hda2, internal journal
>>device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel at redhat.com
>>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
>>hdc: command error: error=0x54
>>ide: failed opcode was 100
>>ATAPI device hdc:
>> Error: Illegal request -- (Sense key=0x05)
>> Read of scrambled sector without authentication -- (asc=0x6f, ascq=0x03)
>> The failed "Read 10" packet command was:
>> "28 00 00 2f 90 a0 00 00 01 00 00 00 00 00 00 00 "
>>end_request: I/O error, dev hdc, sector 12468864
>>kjournald starting. Commit interval 5 seconds
>>EXT3 FS on hda1, internal journal
>>EXT3-fs: mounted filesystem with ordered data mode.
>>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>>SGI XFS Quota Management subsystem
>>XFS mounting filesystem hda5
>>Starting XFS recovery on filesystem: hda5 (dev: hda5)
>>Ending XFS recovery on filesystem: hda5 (dev: hda5)
>>Adding 522104k swap on /dev/hda3. Priority:-1 extents:1
>>ieee1394: Initialized config rom entry `ip1394'
>>ip_tables: (C) 2000-2002 Netfilter core team
>>ip_tables: (C) 2000-2002 Netfilter core team
>>lp: driver loaded but no devices found
>>saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
>>saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder disable output
>>saa7115: decoder enable output
>>saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
>>saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder disable output
>>saa7115: decoder enable output
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set size
>>saa7115: decoder disable output
>>saa7115: decoder enable output
>>application mythfrontend uses obsolete OSS audio interface
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>>saa7115: decoder disable output
>>saa7115: decoder enable output
>>saa7115: decoder disable output
>>saa7115: decoder enable output
>>
>>
>>Mar 16 18:26:44 mythtv kernel: Linux video capture interface: v1.00
>>Mar 16 18:26:44 mythtv kernel: ivtv: no version for "struct_module" found: kerne
>>l tainted.
>>Mar 16 18:26:44 mythtv kernel: ivtv: ==================== START INIT IVTV ======
>>==============
>>Mar 16 18:26:44 mythtv kernel: ivtv: version 0.2.0 (rc3g) loading
>>Mar 16 18:26:44 mythtv kernel: ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM
>> 4KSTACKS gcc-3.4
>>Mar 16 18:26:44 mythtv kernel: ivtv: In case of problems please include the debu
>>g info
>>Mar 16 18:26:44 mythtv cups: cupsd startup succeeded
>>Mar 16 18:26:44 mythtv kernel: ivtv: between the START INIT IVTV and END INIT IV
>>TV lines when
>>Mar 16 18:26:44 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
>>Mar 16 18:26:44 mythtv kernel: ivtv: Autodetected WinTV PVR 250 card
>>Mar 16 18:26:44 mythtv sshd: succeeded
>>Mar 16 18:26:44 mythtv kernel: ivtv: Found an iTVC16 based chip
>>Mar 16 18:26:44 mythtv kernel: ivtv: Unreasonably low latency timer, setting to
>>64 (was 32)
>>Mar 16 18:26:44 mythtv kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106
>>Mar 16 18:26:44 mythtv kernel: tveeprom: Hauppauge: model = 32035, rev = B135, s
>>erial# = 6916180
>>Mar 16 18:26:44 mythtv kernel: tveeprom: tuner = Temic 4066FY5 (idx = 35, type =
>> 18)
>>Mar 16 18:26:44 mythtv kernel: tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2
>> = 0x00000010)
>>Mar 16 18:26:44 mythtv kernel: tveeprom: audio_processor = MSP3415 (type = 6)
>>Mar 16 18:26:44 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok]
>>Mar 16 18:26:44 mythtv kernel: ivtv: Tuner Type 18, Tuner formats 0x00000010, Ra
>>dio: yes, Model 0x008914d5, Revision 0x00000000
>>Mar 16 18:26:44 mythtv kernel: ivtv: PAL tuner detected
>>Mar 16 18:26:44 mythtv kernel: ivtv: Radio detected
>>Mar 16 18:26:44 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c d
>>river #0
>>Mar 16 18:26:44 mythtv xinetd: xinetd startup succeeded
>>Mar 16 18:26:44 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
>>Mar 16 18:26:45 mythtv kernel: saa7115: starting probe for adapter ivtv i2c driv
>>er #0 (0x10005)
>>Mar 16 18:26:45 mythtv kernel: saa7115: detecting saa7115 client on address 0x42
>>Mar 16 18:26:45 mythtv kernel: saa7115: writing init values
>>Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=saa7115[0],ok]
>>Mar 16 18:26:45 mythtv kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
>>Mar 16 18:26:45 mythtv kernel: msp34xx: init: chip=MSP3415G-B8 +nicam +simple +s
>>impler +radio mode=simple
>>Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=MSP3415G-B8,ok]
>>Mar 16 18:26:45 mythtv kernel: msp3410: daemon started
>>Mar 16 18:26:45 mythtv kernel: ivtv: Encoder revision: 0x02040024
>>Mar 16 18:26:45 mythtv kernel: ivtv: Encoder Firmware is buggy, use version 0x02
>>040011
>>Mar 16 18:26:45 mythtv kernel: ivtv: Configuring WinTV PVR 250 card with 5 strea
>>ms
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384 byte bu
>>ffers 4194304 kbytes total
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0 minor
>>0
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 1
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1 minor
>>32
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte buffers
>> 2097152 kbytes total
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2 minor
>>224
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608 byte buf
>>fers 2097152 kbytes total
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3 minor
>>24
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 4
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4 minor
>>64
>>Mar 16 18:26:45 mythtv kernel: ivtv: Setting Tuner 18
>>Mar 16 18:26:45 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) by
>> ivtv i2c driver #0
>>Mar 16 18:26:45 mythtv kernel: ivtv: Setting audio matrix to input 3, output 1
>>Mar 16 18:26:45 mythtv kernel: ivtv: Switching standard to PAL.
>>Mar 16 18:26:45 mythtv kernel: saa7115: decoder set norm PAL
>>Mar 16 18:26:45 mythtv kernel: saa7115: set audio: 0x01
>>Mar 16 18:26:45 mythtv kernel: ivtv: Initialized WinTV PVR 250, card #0
>>Mar 16 18:26:45 mythtv kernel: ivtv: Autodetected WinTV PVR 250 card
>>Mar 16 18:26:45 mythtv xinetd[4968]: xinetd Version 2.3.13 started with libwrap
>>loadavg options compiled in.
>>Mar 16 18:26:45 mythtv kernel: ivtv: Found an iTVC16 based chip
>>Mar 16 18:26:45 mythtv xinetd[4968]: Started working: 0 available services
>>Mar 16 18:26:45 mythtv kernel: ivtv: Unreasonably low latency timer, setting to
>>64 (was 32)
>>Mar 16 18:26:45 mythtv kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106
>>Mar 16 18:26:45 mythtv kernel: tveeprom: Hauppauge: model = 32035, rev = B135, s
>>erial# = 6916325
>>Mar 16 18:26:45 mythtv kernel: tveeprom: tuner = Temic 4066FY5 (idx = 35, type =
>> 18)
>>Mar 16 18:26:45 mythtv kernel: tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2
>> = 0x00000010)
>>Mar 16 18:26:45 mythtv kernel: tveeprom: audio_processor = MSP3415 (type = 6)
>>Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=tveeprom[1],ok]
>>Mar 16 18:26:45 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c d
>>river #1
>>Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
>>Mar 16 18:26:45 mythtv kernel: saa7115: starting probe for adapter ivtv i2c driv
>>er #1 (0x10005)
>>Mar 16 18:26:45 mythtv kernel: saa7115: detecting saa7115 client on address 0x42
>>Mar 16 18:26:45 mythtv kernel: saa7115: writing init values
>>Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=saa7115[1],ok]
>>Mar 16 18:26:45 mythtv kernel: ivtv: ivtv_enc_thread: pid = 2460, itv = 0xe0a050
>>20
>>Mar 16 18:26:45 mythtv kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
>>Mar 16 18:26:45 mythtv kernel: msp34xx: init: chip=MSP3415G-B8 +nicam +simple +s
>>impler +radio mode=simple
>>Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=MSP3415G-B8,ok]
>>Mar 16 18:26:45 mythtv kernel: msp3410: daemon started
>>Mar 16 18:26:45 mythtv kernel: ivtv: Tuner Type 18, Tuner formats 0x00000010, Ra
>>dio: yes, Model 0x008914d5, Revision 0x00000000
>>Mar 16 18:26:45 mythtv kernel: ivtv: PAL tuner detected
>>Mar 16 18:26:45 mythtv kernel: ivtv: Radio detected
>>Mar 16 18:26:45 mythtv kernel: ivtv: Encoder revision: 0x02040024
>>Mar 16 18:26:45 mythtv kernel: ivtv: Encoder Firmware is buggy, use version 0x02
>>040011
>>Mar 16 18:26:45 mythtv kernel: ivtv: Configuring WinTV PVR 250 card with 5 strea
>>ms
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384 byte bu
>>ffers 4194304 kbytes total
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0 minor
>>1
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 1
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1 minor
>>33
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte buffers
>> 2097152 kbytes total
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2 minor
>>225
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608 byte buf
>>fers 2097152 kbytes total
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3 minor
>>25
>>Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 4
>>Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4 minor
>>65
>>Mar 16 18:26:45 mythtv kernel: ivtv: Setting Tuner 18
>>Mar 16 18:26:45 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) by
>> ivtv i2c driver #1
>>Mar 16 18:26:45 mythtv kernel: ivtv: Setting audio matrix to input 3, output 1
>>Mar 16 18:26:45 mythtv kernel: ivtv: Switching standard to PAL.
>>Mar 16 18:26:45 mythtv kernel: saa7115: decoder set norm PAL
>>Mar 16 18:26:45 mythtv kernel: saa7115: set audio: 0x01
>>Mar 16 18:26:45 mythtv kernel: ivtv: Initialized WinTV PVR 250, card #1
>>Mar 16 18:26:45 mythtv kernel: ivtv: ==================== END INIT IVTV ======
>>==============
>>Mar 16 18:26:45 mythtv kernel: ivtv: ivtv_enc_thread: pid = 2553, itv = 0xe0a194
>>c0
>>
>>
>>_______________________________________________
>>mythtv-dev mailing list
>>mythtv-dev at mythtv.org
>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>
>>
>>
>>
>>
>_______________________________________________
>mythtv-dev mailing list
>mythtv-dev at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>
>
hmm,
in reply to graham dunn i've tried tailing both /var/log/message and
mythbackend.log and neither post anything at the point it crashes the
system just appears to lock up.
This is my recording on 1 card and watching other Tv on another channel
problem though.
Tom
More information about the mythtv-dev
mailing list