[mythtv] dvb-s scanning with svn #8406

[Simon Kenyon]

On Thursday 29 December 2005 16:10, John Pullan wrote:
> On 29/12/05, Simon Kenyon <simon at koala.ie> wrote:
> >  Just tried to use my nexus-s after a long gap
> > I added the card in mythtv-setup and then went to the scan channels page.
> > It will not let me select the dvb-s card. It only shows my two pvr-x50's,
> > so when it scans
> > It does so on the wrong card. The dropdown will not let me select my
> > dvb-s card.

> You've setup an appropriate videosouce and cardinput ?

just checked to be sure :-)

it will not let me select the correct cardinput
it will only give me /dev/v4l/video0 or /dev/v4l/video1 as options
but if you look at the output from ivtv-detect:

driver:   ivtv-0.4.0 (tagged release)
card:     WinTV PVR 350, bus info 0000:00:0c.0, ivtv card #0
hardware: saa7115 saa7127 msp34xx tveeprom
     /dev/v4l/video0: MPG encoding (links: /dev/video0)
     /dev/v4l/radio0: Radio
       /dev/v4l/vbi0: VBI encoding (links: /dev/vbi0)
       /dev/v4l/vbi4: VBI from MPG (links: /dev/vbi4)
       /dev/v4l/vbi8: VBI decoding (links: /dev/vbi8)
    /dev/v4l/video16: MPG decoding (links: /dev/video16)
    /dev/v4l/video24: PCM encoding (links: /dev/video24)
    /dev/v4l/video32: YUV encoding (links: /dev/video32)
    /dev/v4l/video48: YUV decoding (links: /dev/video48)

driver:   ivtv-0.4.0 (tagged release)
card:     WinTV PVR 350, bus info 0000:00:0f.0, ivtv card #1
hardware: saa7115 saa7127 msp34xx tveeprom
     /dev/v4l/video1: MPG encoding (links: /dev/video1)
     /dev/v4l/radio1: Radio
       /dev/v4l/vbi1: VBI encoding (links: /dev/vbi1)
       /dev/v4l/vbi5: VBI from MPG (links: /dev/vbi5)
       /dev/v4l/vbi9: VBI decoding (links: /dev/vbi9)
    /dev/v4l/video17: MPG decoding (links: /dev/video17)
    /dev/v4l/video25: PCM encoding (links: /dev/video25)
    /dev/v4l/video33: YUV encoding (links: /dev/video33)
    /dev/v4l/video49: YUV decoding (links: /dev/video49)

driver:   v4l
card:     Logitech QuickCam Orbit
     /dev/v4l/video2: YUV encoding (links: /dev/video2)

driver:   saa7146 v4l2-0.5.0
card:     dvb, bus info PCI:0000:00:0d.0
     /dev/v4l/video3: YUV encoding (links: /dev/video3)

you will see that my dvb card is /dev/v4l/video3

this is on a gentoo system with 2.6.14-gentoo-r4

regards
-- 
simon