[mythtv] Jump Forward/Backward behaviour changed from 0.16 to
current CVS
Terry Barnaby
terry1 at beam.ltd.uk
Mon Oct 25 08:20:39 UTC 2004
Terry Barnaby wrote:
> Doug Larrick wrote:
>
>> Terry Barnaby wrote:
>>
>>> Hi,
>>>
>>> The jump forward/background operation (cursor down/up) keys along
>>> with normal fast forward/rewind seems to have changed from 0.16 to
>>> the current CVS version, at least on my setup.
>>>
>>> With 0.16 a jump forward (10mins) when watching a recording would
>>> jump almost instantaineously forward. The current CVS version seems to
>>> slowly move forward over a period of amount 10secs. The OSD during this
>>> time shows the total movie time incrementing .... After pressing
>>> jump forward a number of times it appears you cannot go forward any
>>> more.
>>>
>>> If I re-install my 0.16 version all is Ok.
>>>
>>> Any ideas ?
>>
>>
>>
>> Did you upgrade backend and frontend at the same time? You need to.
>> Your symptoms are an indication the frontend is not getting
>> positionmap data for the recording.
>>
>> -Doug
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> mythtv-dev mailing list
>> mythtv-dev at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>
> Hi,
>
> Yes the backend and frontend have been upgraded and restarted (many
> times !). I have since checked other clients on my network and they
> are fine. The M10K I am having problems with I believe has the same
> software setup as the other clients except: 1. It is a network boot/NFS
> root system, 2. It has a 2.6.7 kernel rather than a 2.6.8 based one and
> 3. It is a M10K with Unichrome drivers.
>
> Can you point me to the code where the position map is obtained from
> the server ?
>
> Cheers
>
> Terry
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
Hi,
I believe I have found the problem. My server and clients were
set correctly to the timezone GB. The Network boot M10K box
was set in-correctly to the UTC time zone.
In this case the client seems to be unable to determine the length
of a recording correctly ....
This only occurs in the current MythTv CVS. Version 0.16 is Ok ...
I guess this is some bug in MythTv as I would not have though that
this should occur even if the client and host were in different time zones ?
Terry
--
Dr Terry Barnaby BEAM Ltd
Phone: +44 1454 324512 Northavon Business Center, Dean Rd
Fax: +44 1454 313172 Yate, Bristol, BS37 5NH, UK
Email: terry at beam.ltd.uk Web: www.beam.ltd.uk
BEAM for: Visually Impaired X-Terminals, Parallel Processing,
Software Dev
"Tandems are twice the fun !"
More information about the mythtv-dev
mailing list