[mythtv] Bug ?

Nicolas Strina nicolas.strina at ip-man.net
Wed Jun 23 06:58:20 EDT 2004


Hello,

In fact someone told me (on mythtv user ml) to come here to post the 
problem ;)
So let's try with your version.

Cu,

Nicolas

> Hey Nicolas,
>
> You might want to try the ivtv mailing list.
> You always need to be careful which recent ck patch you get, because 
> they're a bit of a hit and miss.. a lot of different stuff is being 
> tried. FYI, I'm using 65b which works really well for me.
>
> Bye, Lucas
>
>
>> I'm using ivtv-0.1.10-pre2-ck95h since this morning. All the modules 
>> are loading fine but  .... I have nothing on the screen when i'm 
>> trying to watch the TV but a few colors sometimes ..
>> I'm running a Gentoo with a Kernel 2.6.5-r1 without any patches but 
>> the ones of gentoo. In Switzerland the tuner type seems to be 28 but 
>> i'm not 100% sure .. But i did test with type 3, 20 and 28 and still 
>> the same.
>>
>> However i have this in dmesg:
>>
>> <snip>
>> saa7115: decoder set picture bright=127 contrast=64 saturation=64 hue=0
>> saa7115: decoder set picture bright=127 contrast=63 saturation=64 hue=0
>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
>> saa7115: decoder disable output
>> saa7115: decoder enable output
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>
>> Here is my modprobe.conf and the output of dmesg
>>
>> Thanks,
>>
>> Nicolas
>>
>> alias char-major-61 lirc_i2c
>> alias char-major-81 videodev
>> alias char-major-81-0 ivtv
>> alias char-major-81-1 bttv
>> alias /dev/v4l ivtv
>> options ivtv ivtv_debug=1 tuner=28
>> options msp3400 once=1 simple=1
>> add below ivtv msp3400 saa7115 tuner saa7127
>> add above ivtv lirc_dev lirc_i2c ivtv-fb
>>
>> Linux video capture interface: v1.00
>> saa7127: video encoder driver version V 0.3 loaded
>> ivtv: version 0.1.10 (0.1.10pre2-ck95h) loading
>> ivtv: Autodetected WinTV PVR 350rev1 card
>> ivtv: Found an iTVC15 based chip
>> ivtv: pci: PCIBUS detected device: 0x2578 vendor: 0x8086
>> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, 
>> simpler (G) no-thread mode
>> msp34xx: $Id$ compiled on: Jun 23 2004 12:03:55
>> ivtv: i2c attach [client=MSP3418W-A2,ok]
>> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>> saa7115: detecting saa7115 client on address 0x42
>> saa7115: writing init values
>> ivtv: i2c attach [client=saa7115[0],ok]
>> saa7115: status: (1E) 0x50, (1F) 0xc0
>> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>> ivtv: i2c attach [client=(tuner unset),ok]
>> saa7127: Selecting NTSC video Standard
>> saa7127: Selecting S-Video+Composite
>> saa7127: Turn WSS off
>> saa7127: Widescreen Mode 4:3 Full Format
>> saa7127: Selecting Normal Encoder Input
>> saa7127: Enable Video Output
>> ivtv: i2c attach [client=saa7127[0],ok]
>> tveeprom: Hauppauge: model = 48134, rev = J347, serial# = 7112005
>> tveeprom: tuner = LG TP18PSB01D (idx = 47, type = 28)
>> tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>> tveeprom: audio_processor = CS5331 (type = 9)
>> ivtv: i2c attach [client=tveeprom[0],ok]
>> ivtv: Tuner Type 28, Tuner formats 0x00000007, Radio: yes, Model 
>> 0x00a93517, Revision 0x00000001
>> ivtv: PAL tuner detected
>> ivtv: Radio detected
>> ivtv: Encoder revision: 0x02040011
>> ivtv: Decoder revision: 0x02020023
>> ivtv: Configuring WinTV PVR 350rev1 card with 10 streams
>> ivtv: Create DMA stream 0 using 128 buffers of size 32768
>> ivtv: Create DMA stream 1 using 128 buffers of size 32768
>> ivtv: Create stream 2 using 64 buffers of size 32768
>> ivtv: Create DMA stream 3 using 32 buffers of size 32768
>> ivtv: Create stream 4
>> ivtv: Create DMA stream 5 using 128 buffers of size 32768
>> ivtv: Create stream 6 using 64 buffers of size 32768
>> ivtv: Create DMA stream 8 using 124 buffers of size 32768
>> ivtv: Create stream 7
>> ivtv: Create DMA stream 9 using 512 buffers of size 32768
>> ivtv: Setting Tuner 28
>> tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) by ivtv i2c driver #0
>> tuner: TV freq (201587992.00) out of range (44-958)
>> ivtv: Setting audio matrix to input 3, output 1
>> ivtv: Switching standard to PAL.
>> tuner: TV freq (201587992.00) out of range (44-958)
>> saa7115: decoder set norm PAL
>> saa7115: set audio: 0x01
>> saa7127: Setting Encoder Video Standard
>> saa7127: Set PAL Video Mode
>> saa7127: Selecting PAL video Standard
>> ivtv: Initialized WinTV PVR 350rev1, card #0
>> lirc_dev: IR Remote Control driver registered, at major 61
>> bttv: driver version 0.9.12 loaded
>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>> ivtv: i2c attach [client=Hauppauge IR,ok]
>> lirc_dev: lirc_register_plugin:sample_rate: 6
>> ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
>> ivtv-osd: screen coords: [0 0] -> [720 576]
>> ivtv-osd: original global alpha = 208
>> ivtv-osd: current OSD state = 39
>> ivtv-osd: new global alpha = 208 (1 255 0)
>> ivtv-osd: Good video_base is inside valid allocated space.
>> ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe2a58000, size 1665k
>> ivtv-osd: mode is 720x576x32, linelength=2880
>> ivtv-osd: fb0: iTVC15 TV out frame buffer device
>> EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 
>> filesystem as ext2
>> ivtv: Switching standard to PAL.
>> tuner: TV freq (201587992.00) out of range (44-958)
>> saa7115: decoder set norm PAL
>> saa7115: set audio: 0x01
>> saa7127: Setting Encoder Video Standard
>> saa7127: Set PAL Video Mode
>> saa7127: Selecting PAL video Standard
>>
>>
>> _______________________________________________
>> mythtv-dev mailing list
>> mythtv-dev at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>
>>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-dev mailing list
>mythtv-dev at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>  
>




More information about the mythtv-dev mailing list